• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.134-141
• /
• 2008

To evaluate the engineering properties of soil, the laboratory test always is carried out using samples obtained from the field. There are many studies to estimate the effect of sampling disturbance. The objective of this study appraises the disturbance using the shear wave velocity. The new shelby tube which three transducers are installed every 20cm interval is used. To laboratory tests, the large-scale consolidometer (calibration chamber) is used. During 1cm penetration, the shear wave velocity is measured by every transducer. The initial sampling disturbance is assessed through the velocity difference from bottom to right upside transducer. After finishing the sampling, the velocity is still measured every time to assess the soil disturbance in shelby tube itself. Through the measured velocity, the effect of disturbance is appraised. This study suggests that the sampling disturbance of shelby tube is effectively evaluated using shear wave velocity.

• 한국항공우주학회지
• /
• 제46권3호
• /
• pp.257-268
• /
• 2018

본 논문은 한국형 전투기 개발 시 적의 위협에 대한 취약성 분석을 위해 요구되는 고속 관통자가 표적을 관통하는 기구에 대해 수치 해석적으로 연구한 결과이다. 표적은 1 mm~6.3 mm 두께를 갖는 준 무한평면의 알루미늄(Aluminum) 2024 재질을 고려하였다. 관통자는 반구형 노즈 형상을 갖는 강(steel) 재질로, 입사속도는 350~3353 m/s까지, 질량은 0.32~16 g까지 갖는 것으로 고려하였다. 수치해석을 위해 사용된 실 사격 데이터는 THOR 방정식으로부터 추정하여 유추하였다. 수치해석 결과 표적을 관통하는 과정에서 관통자의 탄도한계속도는 관통자의 질량에 대한 지수 함수적으로 감소하는 수식으로 형식화(closed form of formalization) 하였다. 관통 후 잔류속도 및 잔류질량은 표적의 두께와 관통자의 질량 및 입사속도에 의존된 지수 함수적으로 감소하는 수식으로 각각 형식화하였다.

• Korean Chemical Engineering Research
• /
• 제60권2호
• /
• pp.282-288
• /
• 2022

코로나 팬데믹 시대에서 비말(respiratory droplet)을 통한 감염 및 확산을 막기 위해 마스크는 없어서는 안 될 생활 필수품이 되었다. 본 연구에서는 두 가지 다른 타입의 마스크(KF-94 마스크와 덴탈 마스크)가 비말 차단에 얼마나 효과적인지를 파악하기 위하여, i) 각각의 마스크를 구성하고 있는 필터의 젖음성(wettability) 특성을 분석하고, ii) 필터 표면에 빠른 속도로 충돌하는 미소 액적의 동적 거동 특성을 실험적으로 관찰하였다. 각 필터의 구성 재료에 따라 상반된 젖음성 특성, 소수성(hydrophobicity) 또는 친수성(hydrophilicity)을 보임을 확인하였다. 또한, 일정 체적을 갖는 미소 액적을 안정적으로 토출하는 공압 조건을 탐색하고 액적의 충돌 속도 변화에 따른 액적 충돌 거동 변화를 분석하였다. 마스크를 구성하고 있는 필터의 종류와 액적 충돌 속도에 따라 i) 필터를 통과하지 못하거나(no penetration), ii) 필터에 포획(capture)되거나, iii) 필터를 통과(penetration)하는 등의 다른 충돌 후 거동을 보임을 확인하였다. 이러한 결과들은 비말 차단용 마스크 디자인에 있어 매우 기본적이고 유용한 정보를 제공할 뿐만 아니라, 다양한 다공성 표면에서의 액적 거동에 대한 학문적 연구에도 도움이 될 것으로 판단된다.

• 대한토목학회논문집
• /
• 제28권6C호
• /
• pp.339-347
• /
• 2008

현장 관입 실험은 프로브 관입에 따라 주변 지반을 의도적으로 파괴시켜 지반특성을 파악할 수 있다. 본 논문의 목적은 현장 점토지반에 서로 다른 크기의 프로브 관입으로 인한 간극 수압 소산 특성을 이용하여 파괴에 따른 교란 효과를 분석하는 것이다. 현장 실험을 수행하기 위해 콘관입 시험(CPT), 딜라토미터 시험(DMT) 그리고 현장 속도 프로브 장비(FVP: Field Velocity Probe)가 사용되었다. 샌드 매트(sand mat), PBD 그리고 사석을 이용한 지반 개량 중인 부산 북컨테이너 현장에서 실험이 진행 되었으며, 샌드 매트(sand mat)공법 이후 실내 실험을 수행하기 위해 시료가 채취 되었다. 실내에서는 물성치 실험 및 압밀 실험을 수행하여 지반 특성과 수평압밀계수 값을 도출하였다. 현장 실험은 지반 개량 후 압밀도 90% 시점에서 사석 제거 후 케이싱을 통해 CPT, DMT 그리고 FVP 순서대로 실험이 수행 되었다. 관입에 따른 영향 범위를 최소화 시키기 위해 각각의 실험은 3m 간격을 유지 하였으며, 매 심도 24m에서 관입을 멈추고 시간에 따른 간극 수압 변화 양상을 측정하였다. 실내 압밀 실험을 통해 수평 압밀 계수$(C_h)$를 산정하였으며, 현장 실험을 통해 각 프로브에 따른 $t_{50}$ 값을 계산 하였다. $t_{50}$값을 이용하여 산정된 등가 유효 반경은 FVP가 가장 작게 그리고 DMT가 가장 크게 산정되었다.

• 한국분무공학회지
• /
• 제20권1호
• /
• pp.35-42
• /
• 2015

This study is to investigate the spray behavior of DME-LPG blended fuels in common rail injection system for diesel engines. The visualization experiment was performed to analyze the macroscopic spray behavior of test fuels. In addition, the experiment using BOS(Background Oriented Schlieren) method is performed to compare liquid phase and gas phase. The test fuels are injected in high pressure chamber. The ambient pressure of high pressure chamber was formed by nitrogen gas. Spray tip penetration, spray cone angle and spray area were measured using high speed camera. SMD(Sauter Mean Diameter) and spray particle velocity were measured using the PDPA(Phase Doppler Particle Analyzer) system to analyze the microscopic properties of test fuels. The results of this experiment showed that spray tip penetration, spray cone angle and spray area of DME-LPG fuels are similar to those of DME fuel. When compared to results of experiment using BOS, significant differences of spray tip penetrations, spray cone angle and spray area are showed because of gas phase. The results of experiment using BOS method showed higher values. SMD of DME-LPG blended fuels is smaller than that of DME fuel. Velocity of DME-LPG blended fuels is faster than that of DME fuel.

• 한국자동차공학회논문집
• /
• 제5권1호
• /
• pp.87-100
• /
• 1997

The ability of turbulence model to accurately describe the complex characteristics of the flow field and the fuel spray is of great importance in the optimum design of diesel engine. The numerical simulations of the flow field and the spray characteristics within the combustion chamber of direct injection model entgine are performed to examine the applicability of turbulence model. The turbulence models used are the RNG $\varepsilon$ model and the modified $\varepsilon$ model which included the compressibility effect due to the compression/expansion of the charges. In this study, the predicted results in the quiescent condition of direct injection model engine show reasonable trends comparing with the experimental data of spray characteristics, i. e., spray tip penetration, spray tip velocity. The results of eddy viscosity obtained using the $\varepsilon$ model in the spray region is significantly larger than that obtained using the RNG $\varepsilon$ model. The application of the RNG model seems to have some potential for the simulations of the spray characteristics, e. g., spray tip penetration, spray tip velocity, droplets distribution over the $\varepsilon$ model.

• Steel and Composite Structures
• /
• 제22권3호
• /
• pp.567-587
• /
• 2016

The present investigation is to study the plane wave propagation and reflection of plane waves in a homogeneous transversely isotropic magnetothermoelastic medium with two temperature and rotation in the context of GN Type-II and Type-III (1993) theory of thermoelasticity. It is found that, for two dimensional assumed model, there exist three types of coupled longitudinal waves, namely quasi-longitudinal wave (QL), quasi-transverse wave (QTS) and quasi-thermal waves (QT). The different characteristics of waves like phase velocity, attenuation coefficients, specific loss and penetration depth are computed numerically and depicted graphically. The phenomenon of reflection coefficients due to quasi-waves at a plane stress free with thermally insulated boundary is investigated. The ratios of the linear algebraic equations. These amplitude ratios are used further to calculate the shares of different scattered waves in the energy of incident wave. The modulus of the amplitude and energy ratios with the angle of incidence are computed for a particular numerical model. The conservation of energy at the free surface is verified. The effect of energy dissipation and two temperatures on the energy ratios are depicted graphically and discussed. Some special cases of interest are also discussed.

• 한국군사과학기술학회지
• /
• 제8권4호
• /
• pp.146-151
• /
• 2005

The burning rates of combustible cartridge cases(CCCs) of 120mm kinetic energy ammunition were measured by CBT(Closed Bomb Tester). The burning coefficient was 1.4 for CCC fabricated by Post Impregnation(PI) process, and 1.0 for that by Beater Additive(BA) process. The BA process CCC showed the fixed burning coefficient of 1.0 in spite of changing the composition of CCC. As the Korean Future Main Battle Tank is requiring the high penetration performance compared with that of KlAl tank ammunition(K276), CCC was designed to have higher impetus composition than that of K276 composition(525J/g). The optimum impetus was 600J/g when considering the increases of pressure and muzzle velocity with increasing impetus. When impetus of CCC by changing the composition increased from 525J/g to 600J/g, the muzzle velocity of 12m/s at pressure increase of 3500psi increased in case of using SCDB propellant.

• 한국군사과학기술학회지
• /
• 제21권5호
• /
• pp.563-571
• /
• 2018

In order to effectively protect a penetrator, the conically shaped protector was proposed and the protection capability was investigated. The collision and penetration of the penetrator with the protector were analyzed using dynamic finite element analysis. The post impact behaviors of the penetrator, i.e., flying velocity and the change of attitude angle, were monitored to investigate the protection capability. The flying velocity and the attitude angle are used to investigate the deviation and the penetration power respectively. The effect of rotation speed of the protector and the collision position on the protection capability is investigated in the viewpoint of deviation and attitude angle when penetrator colliding with our tank.

• 한국자동차공학회논문집
• /
• 제15권5호
• /
• pp.30-37
• /
• 2007

Dimethyl Ether(DME) is an alternative fuel for diesel engine, it is renewable and offers potential reductions in emissions. This work was conducted to figure out the macroscopic behavior and the atomization characteristics of DME using a common-rail injection system. The macroscopic behavior was visualized with the spray visualization system composed of a Nd;YAG laser and an ICCD camera. The atomization characteristics were investigated in terms of axial mean velocity, Sauter mean diameter(SMD) and droplet distributions obtained from a phase Doppler particle analyzer(PDPA) system. In this study, it was revealed that the macroscopic behavior and the atomization characteristics of DME are similar compared with commercial diesel fuel. However, DME fuel has a shorter spray tip penetration and a small SMD due to the effect of evaporation characteristics.