• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.411-416
• /
• 1999

The measurement of unsteady flow rate is of vital importance to clarify and improve the dynamic characteristics in pipeline, hydraulic components and system. There is also demand for a real time flow sensor of ability to measure unsteady flow rate with high accuracy and fast response to realize feedback control of flow rate in fluid power systems. In this paper, we propose an approach for estimating unsteady flow rate through a pipeline and components under high pressure condition. In the method, unsteady flow rate is estimated by using hydraulic pipeline dynamics and the measured pressure values at two distant points along the pipeline. The distributed parameter model of hydraulic pipeline is applied with consideration of frequency dependent viscosity friction and unsteady velocity distribution at a cross section of a pipeline. By using the self-checking functions of the method, the validity is investigated by comparison with the measured and estimated pressure waveforms at the halfway section on the pipeline. The results show good agreement between the estimated flow rate waveforms and theroetical those under unsteady laminar flow conditions. the method proposed here is useful in estimating unsteady flow rate through an arbitray cross section in hydraulic pipeline and components without installing an instantaneous flowmeter.

• 대한기계학회논문집B
• /
• 제36권12호
• /
• pp.1217-1222
• /
• 2012

능동 유동 제어의 되먹임 신호 및 벽면 전단 응력 측정 등을 위해 벽면 유동 센서가 사용되고 있다. 본 연구에서는 광학 마우스에 사용되는 미세 영상 장치를 이용하여 벽면 근처에서 2차원 및 3차원 유체 속도를 측정할 수 있는 센서를 개발하였다. 미세 영상 장치에서 나오는 영상 신호 획득 시스템을 구축하고 획득한 영상에 입자화상속도기법과 초점이탈 영상기법을 적용하여 측정 영역에서의 산란 입자의 위치를 측정하였다. 모사 유동 실험을 통해, 개발된 벽면 유동 센서의 공간 해상도 및 측정 정확도를 검증하였고 기존 미세 영상 장치의 quadrature 신호 결과와 비교하여 입자화상속도기법을 적용할 경우, 측정 정확도 및 측정 범위가 확대되는 것을 확인하였다.

• 한국해양공학회지
• /
• 제26권6호
• /
• pp.59-65
• /
• 2012

In this research, a novel mater arm was studied as a teaching device for an underwater revolute robot arm used as a slave arm. The master arm was designed to be a seven-degree-of-freedom (DOF) structure, with a structure similar to that of the slave arm, and to be desktop size to allow it to be worn on a human arm. The master arm with encoders on the joints was used as an input device for teaching a slave robot arm. In addition, small electric magnets were installed at the joints of the master arm to generate the haptic force. A control system was designed to sense excessive force and torque in the joints of the master arm and protect it by controlling the position and velocity of the slave arm through the encoder signal of the master arm.

• 한국정밀공학회지
• /
• 제15권11호
• /
• pp.58-66
• /
• 1998

A low power consuming laser scanning vibrometer is studied for its development. For its optical system, a laser interferometer is constructed to use the Doppler effect. In order to reduce the driving power of the scanning system, a small displacement of the scanning system is produced, which is achieved by using a magnetostrictive actuator. A sufficient rotating angle of the scanning system is obtained by using an amplified displacement from the resonant phenomena of a second order mechanical system composed of a mass and spring. The control of the magnetostrictive actuator using a Terfenol-D is performed without using a feedback system to help reduce the power consumption. The vibration analysis is made for the sinusoidal scanning input to have the space domain information from the time domain of the velocity of a vibration object. As a partial work of development of a tow power consuming laser scanning vibrometer, in this work, a scanning system which has the above features is developed and experimentally investigated. For the purpose of the optical system calibration, the vibration measurement for one axis is presented and the future works are discussed.

• Advances in nano research
• /
• 제7권3호
• /
• pp.157-167
• /
• 2019

In this paper, a classical plate model is utilized to formulate the wave propagation problem of magnetostrictive sandwich nanoplates (MSNPs) while subjected to hygrothermal loading with respect to the scale effects. Herein, magnetostriction effect is considered and controlled on the basis of a feedback control system. The nanoplate is supposed to be embedded on a visco-Pasternak substrate. The kinematic relations are derived based on the Kirchhoff plate theory; also, combining these obtained equations with Hamilton's principle, the local equations of motion are achieved. According to a nonlocal strain gradient theory (NSGT), the small scale influences are covered precisely by introducing two scale coefficients. Afterwards, the nonlocal governing equations can be derived coupling the local equations with those of the NSGT. Applying an analytical solution, the wave frequency and phase velocity of propagated waves can be gathered solving an eigenvalue problem. On the other hand, accuracy and efficiency of presented model is verified by setting a comparison between the obtained results with those of previous published researches. Effects of different variants are plotted in some figures and the highlights are discussed in detail.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.981-985
• /
• 2004

In this paper we designed the motor control IP Core and evaluate its quality from the viewpoint of IP reuse. The most attractive merit of this methodology, so called IP-based hardware design, is hardware reuse. Although various vendors designed hardware with the same specification and got the same functional results, all that IPs is not the same quality in the reuse aspect. As tremendous calls for SoC have been increased, associated research about IP quality standard, VSIA(Virtual Socket Interface Alliance) and STARC(Semiconductor Technology Academic Research Center), has been doing best to make the IP quality evaluation system. And they made what conforms to objective IP design standard. We suggest the methodology to evaluate our own designed motor control IP quality with this standard. To attain our goal, we designed motor control IP that could control the motor velocity and position with feedback compensation algorithm. This controller has some IP blocks : digital filter, quadrature decoder, position counter, motion compensator, and PWM generator. Each block's functionality was verified by simulator ModelSim and then its quality was evaluated. To evaluate the core, We use Vnavigator for lint test and ModelSim for coverage check. During lint process, We adapted the OpenMORE's rule based on RMM (Reuse Methodology Manual) and it could tell us our IP's quality in a manner of the scored value form. If it is high, its quality is also high, and vice versa. During coverage check ModelSim-SE is used for verifying how our test circuits cover designs. This objective methods using well-defined commercial coverage metrics could perform a quantitative analysis of simulation completeness. In this manner, We evaluated the designed motor control IP's quality from the viewpoint of reuse. This methodology will save the time and cost in designing SoC that should integrate various IPs. In addition to this, It can be the guide for comparing the equally specified IP's quality. After all, we are continuously looking forward to enhancing our motor control IP in the aspect of not only functional perfection but also IP reuse to prepare for the SoC-Compliant motor control IP design.

• 한국산학기술학회논문지
• /
• 제11권4호
• /
• pp.1498-1503
• /
• 2010

이 연구는 컴퓨터소프트웨어 프로그램 활용이 심폐소생술의 질 향상에 얼마나 영향을 미치는지를 알아보는 연구이다. 이를 위하여 일개 대학 응급구조학과 학생 50명을 대상으로 2009년 10월에서 11월까지 4주에 걸쳐 16시간 동안 성인심폐소생술에 관한 이론과 실기를 컴퓨터소프트웨어 프로그램과 심폐소생술 마네킹을 활용하여 교육 후 심폐소생술의 질을 평가하였다. 그 결과 컴퓨터소프트웨어 프로그램을 활용한 그룹에서 인공호흡 불어넣기 부분이 통계적 유의성을 보였으며(p<0.000), 전체적인 정확도 측면에서도 메트로놈 활용보다 컴퓨터 소프트웨어 프로그램을 활용하는 것이 더 유의한 것으로 나타났다(p<0.002). 흉부압박에는 너무 약하게 실시한 횟수에서 두 그룹 간 유의한 차이를 볼 수 있었다(p=0.000). 결론적으로 심폐소생술의 질 개선을 위해서는 피드백이 가능한 PC Skillreporting system을 활용한 술기교육 프로그램을 모색하고 적용할 필요가 있다고 사료된다.

• 대한의용생체공학회:의공학회지
• /
• 제28권5호
• /
• pp.609-617
• /
• 2007

In this paper, a new rehabilitation training system was developed to improve equilibrium sense of the elderly by combining virtual reality technology with a fixed exercise bicycle. In order to evaluate the effectiveness of the training system, the elderly participated as test subject in the investigation of the influence of different the parameters on postural balance control. We measured three different running modes of virtual bicycle system with two successive sets. The parameters measured were running time, velocity, the weight movement, the degree of the deviation from the road, and the variables about the center of pressure. The repeated training, our results showed that the running capability of the elderly improve compared. In addition, it was found out that the ability of postural control and the equilibrium sense was improved with the presentation of the visual feedback information of the distribution of weight. From the results of this experiment, we showed that our newly developed system might be useful in the diagnosis of equilibrium sense or in the improvement of the sense of sight and, somatic, and vestibular sense of the elderly in the field of rehabilitation training.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제1권2호
• /
• pp.205-210
• /
• 2013

본 연구에서는 스키 시뮬레이터의 사용자 감응형 제어를 위한 물리모델과 동작인식 시스템의 개발되었으며, 스키 선수의 자세 변화에 따른 스키 슬로프 상에서의 거동과의 부합성 확보를 위하여 실제 현장 실험데이터의 회귀분석을 통해 동작인식 시스템에 사용될 파라미터 및 관계식을 도출하였다. 개발된 물리모델 기반 스키 동작 인식 시뮬레이터는 실시간으로 Kinect 장치를 사용하여 사용자의 관절별 질량을 분석하여, 정확한 체중심을 추정하고, 시뮬레이터 하드웨어에서 적용할 수 있도록 힘, 속도, 가속도에 대한 피드백을 전달하도록 구성되었다. 본 연구결과는 스키시뮬레이터의 인식모듈로 사용되었으며, 물리모델 기반 가상 스포츠 시뮬레이터 제작에 응용 할 수 있는 자료로 활용될 것이다.

• 대한토목학회논문집
• /
• 제29권2D호
• /
• pp.295-303
• /
• 2009

본 연구에서는 가이드웨이의 특성이 중저속 자기부상열차의 주행성에 미치는 영향을 파악하는데 목적을 두고 있다. 이를 위하여 자기 공극의 피드백을 포함한 2자유도 차량에 대한 운동방정식을 구성하고, 최적능동제어기법을 적용하여 수치해석을 수행하였다. 매개변수 연구로 차량 속도, 레일조도, 교량 처짐, 경간의 연속성, 경간장 등이 UTM-01 자기부상열차의 응답에 미치는 영향을 파악하였다. 해석 결과를 보면, 차량 설계속도 내에서는 차량의 응답이 크게 증가하지 않고 일정한 수준을 유지하였으며, 차량의 응답은 주로 가이드웨이 처짐에 의하여 지배를 받은 것으로 나타났다. 결론적으로 차량 공극의 변화를 줄여서 주행성을 향상시키려면 가이드웨이의 최대 처짐을 작게 하고, 단순거더 보다는 연속거더 구조로 구성하는 것이 유리한 것으로 나타났다.