• 한국지능시스템학회논문지
• /
• 제22권1호
• /
• pp.36-41
• /
• 2012

본 논문에서는 자동물류운반시스템(AGV)에 사용되는 가감속 제어를 위한 속도 프로파일 기반의 가감속 위치제어를 DC 모터 실험을 통한 토크변화에 대해서 고찰한다. 속도 프로파일을 이용한 모터의 가감속 제어는 모터에 걸리는 부하를 줄임으로써 시스템의 무리한 구동을 방지하고 수명을 연장 시키는 장점을 가지고 있다. 체계적인 설계 구조를 갖는 상태 피드백 제어기를 이용하여 속도 프로파일을 이용한 가감속 제어 기반의 DC 모터의 위치제어와 단순 위치제어를 모의실험을 통하여 비교함으로써 토크 크기를 비교 관찰한다. 또한 CEM-IP-01의 카트 위치 제어 실험을 통하여 이를 검증한다.

• 전기학회논문지
• /
• 제60권8호
• /
• pp.1592-1598
• /
• 2011

In this paper, a formation control method based on the leader-following approach for nonholonomic mobile robots is proposed. In the previous works, it is assumed that the followers know the leader's velocity by means of communication. However, it is difficult that the followers correctly know the leader's velocity due to the contamination or delay of information. Thus, in this paper, an adaptive approach based on the parameter projection algorithm is proposed to estimate the leader's velocity. Moreover, the adaptive backstepping technique is used to compensate the effects of a dynamic model with the unknown time-invariant and time-varying parameters. From the Lyapunov stability theory, it is proved that the errors of the closed-loop system are uniformly ultimately bounded. Simulation results illustrate the effectiveness of the proposed control method.

• 한국정밀공학회지
• /
• 제20권12호
• /
• pp.89-95
• /
• 2003

A PID controller integrated with a velocity feedback is designed for fluid power elevator model system in this study. In this case, for outside disturbance load a hydraulic cylinder and a pressure control valve are used. In this method overshoot is reduced and settling time becomes also shorter than the values achieved from the PID controller system only In conclusion a PID controller integrated with a velocity feedback is considered a suitable control method for fluid power elevator system.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(5)
• /
• pp.131-134
• /
• 2001

This paper proposes a stable control rule for nonlinear unicycle-type mobile robot. The control method uses a local error coordinate system, velocity and distance constants $\kappa$$\_$x/, $\kappa$$\_$y/, and he. Stability of control rule is proved Liapunov function. System input to the mobile robot is reference posture ($\chi$$\_$r/, y$\_$r/, $\theta$$\_$r/)/sup/ $\tau$/ and reference e velocity (ν$\_$r/,$\omega$$\_$r/)$\^$$\tau$/. System output of the mobi-le robot is velocity of driving wheels. We introduce limit velocity for preventing high initial speed. From simulation results, we can see the proposed control rule is stable.

• 전기학회논문지
• /
• 제67권7호
• /
• pp.840-845
• /
• 2018

BLDC motor is widely used as a servo motor due to high efficiency, high power density, low inertia, and low maintenance. However, BLDC motor generally needs position and velocity sensors to control actuation system. Usually, analog tachometers and encoders have been used for velocity feedback sensors. However, using these types of sensors have problems such as the cost, space, and malfunction. So, This paper is to propose a new velocity measurement method using linear hall-effect and enhanced differentiator for BLDC motor. In order to verify the feasibility of the proposed method, several simulations and experiments are performed. It is shown that the proposed velocity measurement method can satisfy the requirements without using of velocity sensor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.47-49
• /
• 2005

This paper presents a robust speed control method of induction motors(IM) using a Non-linear PI controller(NPI), NPI is high gain controller in region of small error, and low gain controller in region of large error. so in steady state, system will be robust against variation of load torque. The simulation and experiment results confirm the validity of proposed control scheme.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.1075-1079
• /
• 1989

In this paper a robust control design is developed for the control of a multi-joint manipulators using sliding observer. The sliding observer is introduced to estimate the angular velocity of the links under the disturbance input. The feedback control is designed by the use of the estimated value of the angular velocity .theta.. The VSS control laws is introduced to ensure the robustness concerning the disturbance inputs. To illustrate the effectiveness of the proposed method, a computer simulation is performed for a two-joint manipulator.

• 한국수자원학회논문집
• /
• 제41권6호
• /
• pp.575-585
• /
• 2008

수자원의 계획 평가 관리 및 수공구조물의 설계를 위해서는 정확하고 신뢰성 높은 유량 자료가 필수적이다. 본 연구에서는 Chiu의 유속분포와 최대유속 추정을 이용하여 하천유량을 계산하는 새로운 방법을 제시하였다. 기존 면적유속법과 비교 검토한 바, 본 연구에서 개발한 방법은 기존 유속면적법과 매우 유사한 하천유량을 보였다. Price-AA를 이용하여 유속을 측정할 경우 측선의 수심에 따라 정해진 지점에서 유속을 측정하여야 하는데, 본 연구에서 제시한 방법을 이용하면 임의의 측선과 측점에서 유속을 측정하여도 정확한 유량계산이 가능하다. 그러나 흐름 단면이 매우 복잡하거나 좌우의 비대칭성이 심한 경우에는 엔트로피 개념의 Chiu의 유속분포가 실제 자연하천의 흐름분포에서 멀어지고 유량산정에 Chiu의 유속분포의 정확도가 떨어지기 때문에 본 연구에서 제시한 방법을 적용하기 어렵다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.494-497
• /
• 2005

Direct velocity feedback (DVFB) control with a collocated distributed actuator and point sensor pair is known that it offers a good stability with high performance when the control strategy is applied at the suppression of structural vibration. Also decentralized control method introduced to offer to reduce implementaion effort and malfunction due to failure in sensors and actuators of control system has become an important position in DVFB. In this paper, the decentralized control is compared with centralized control in terms of vibrational velocity reduction in a clamped-clamped beam.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권5호
• /
• pp.713-720
• /
• 2009

Numerous applications of position controlling devices using servoing technique and transmission of energy through belt drives are practiced in the industry. Belt drive is a simple, lightweight, low cost power transmission system. Belt drives provide freedom to position the motor relative to the load and this phenomenon enables reduction of the robot arm inertia. It also facilitates quick response when employed in robotics. In this paper, precision positioning of a belt driven mechanism using a feed-forward compensator under maximum acceleration and velocity constraints is proposed. The proposed method plans the desired trajectory and modifies it to compensate delay dynamics and vibration. Being an offline method, the proposed method could be easily and effectively adopted to the existing systems without any modification of the hardware setup. The effectiveness of the proposed method is demonstrated through computer simulation and experimental results.