• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.4
• /
• pp.216-227
• /
• 2014

Mechanical Relay (McR) is a relaying architecture to enable data communications, where it can endure the transportation delay and intermittent disconnection. Every kind of vehicular infrastructures can be readily utilized for the mechanical relaying in the manner of moving natures, which brings the most significant consequences compared to conventional relaying schemes. In this paper, we analyze the ergodic network throughput of McR in wireless line networks (WLN) to compare the results between employing McRs and direct multi-hopping through the users without McRs. We demonstrate the McR scheme that are not only Ve-SISO but also Ve-SIMO/MISO. The numerical results of ergodic network throughputs contribute to the trade-off relation depending on the speed v of McRs, intensity factors ${\lambda}_u$ and ${\lambda}_r$, and the methods of how McRs are utilized.

• Journal of Korea Spatial Information System Society
• /
• v.10 no.3
• /
• pp.45-54
• /
• 2008

This paper designs and Implements a connectivity analyzer for the hybrid vehicular network based on the real-life movement history data achieved from the Taxi telematics system currently in operation, aiming at providing a useful guideline and information to build a telematics network. The simulator traces the location of each vehicle, sets the vehicle type, either gateway or normal, decides whether it can be connected to a mobile gateway, keeps track of status of the vehicle, and calculates the duration of disconnected state. With this analysis considering the transmission range and gateway ratio, we can decide the cost-effective number of mobile gateways having both cellular and ad-hoc network interfaces, and buffer space requirement based on the measured disconnection time and message generation ratio.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.10
• /
• pp.4698-4716
• /
• 2017

Wireless signal transmission is influenced by environmental effects. These effects have also been challenging for Vehicular Ad hoc Network (VANET) in real-time communication. More specifically, in an urban environment, with high mobility among vehicles, a vehicle's status from the transmitter can instantly trigger from line of sight to non-line of sight, which may cause loss of real-time communication. In order to overcome this, a deterministic signal propagation model is required, which has less complexity and more feasibility of implementation. Hence, we propose a realistic path loss model which adopts ray tracing technique for VANET in a grid urban environment with less computational complexity. To evaluate the model, it is applied to a vehicular simulation scenario. The results obtained are compared with different path loss models in the same scenario based on path loss value and application layer performance analysis. The proposed path loss model provides higher loss value in dB compared to other models. Nevertheless, the performance of vehicle-vehicle communication, which is evaluated by the packet delivery ratio with different vehicle transmitter density verifies improvement in real-time vehicle-vehicle communication. In conclusion, we present a realistic path loss model that improves vehicle-vehicle wireless real-time communication in the grid urban environment.

• Journal of Computing Science and Engineering
• /
• v.6 no.3
• /
• pp.227-242
• /
• 2012

Vehicular Ad Hoc Networks (VANETs) are highly dynamic and unstable due to the heterogeneous nature of the communications, intermittent links, high mobility and constant changes in network topology. Currently, some of the most important challenges of VANETs are the scalability problem, congestion, unnecessary duplication of data, low delivery rate, communication delay and temporary fragmentation. Many recent studies have focused on a hybrid mechanism to disseminate information implementing the store and forward technique in sparse vehicular networks, as well as clustering techniques to avoid the scalability problem in dense vehicular networks. However, the selection of intermediate nodes in the store and forward technique, the stability of the clusters and the unnecessary duplication of data remain as central challenges. Therefore, we propose an adaptable destination-based dissemination algorithm (DBDA) using the publish/subscribe model. DBDA considers the destination of the vehicles as an important parameter to form the clusters and select the intermediate nodes, contrary to other proposed solutions. Additionally, DBDA implements a publish/subscribe model. This model provides a context-aware service to select the intermediate nodes according to the importance of the message, destination, current location and speed of the vehicles; as a result, it avoids delay, congestion, unnecessary duplications and low delivery rate.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.6
• /
• pp.1297-1307
• /
• 2013

Several multi-hop applications developed for vehicular ad hoc networks use broadcast as a means to either discover nearby neighbors or disseminate useful traffic information to othet vehicles located within a certain geographical area. However, the conventional broadcast mechanism may lead to the so-called broadcast storm problem, a scenario in which there is a high level of contention and collision at the link layer due to an excessive number of broadcast packets. To solve broadcast storm problem, we propose an RPB-MACn-based LV-CAST that is a vehicular broadcast algorithm for disseminating safety-related emergency message. The proposed LV-CAST identifies the last node within transmission range by computing the distance extending on 1 hop from the sending node of an emergency message to the next node of receiving node of the emergency message, and the last node only re-broadcasts the emergency message. The performance of LV-CAST is evaluated through simulation and compared with other message dissemination algorithms.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.622-628
• /
• 2016

The prosperity of IT technologies and the removal of restrictions regarding Unmanned Aerial Vehicles (UAVs), also known as drones, have driven growth in their popularity. However, without a proper solution to the problem of accident avoidance for UAVs, this popularity increases the potential for collisions between UAVs and between UAV and terrain features. These collisions can occur because UAVs to date have flown using radio control or image recognition based autonomous navigation. Therefore, we propose efficient UAV routing schemes to tackle the collision problem using vehicular communication systems. Performance evaluation by computer simulation shows that the proposed methods effectively reduce the collision probability and improve the routing efficiency of the UAV. Furthermore, the proposed algorithms are compatible and can be directly applied with small overhead to the commercial vehicular communication system implementation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12B
• /
• pp.1075-1082
• /
• 2008

A greedy forwarding algorithm is one of the most suitable solutions for routing in vehicular ad-hoc networks. Compared to conventional routing protocols for mobile ad-hoc networks, greedy forwarding based routing protocols maintain only local information of neighbors instead of per-destination routing entries, and thus they show better performance in highly-mobile vehicular ad-hoc networks. With greedy forwarding, each node learns its geographical position and periodically broadcasts a beacon message including its position information. Based on the position information, each node selects a neighbor node located closest to the destination node as the next forwarder. One of the most serious problems in greedy forwarding is the lost link problem due to the mobility of nodes. In this paper, we propose a new algorithm to reduce the lost link problem. The proposed algorithm aims to find an efficient and stable routing path by taking account of the position of neighbors and the last beacon reception time. Our simulation results show that the proposed algorithm outperforms the legacy greedy algorithm and its variants.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.8
• /
• pp.843-850
• /
• 2016

This paper introduces a novel modulation scheme for vehicular communication in taking advantage of existing LED lights available on a car. Our proposed 2-Phase Shift Keying (2-PSK) is a spatial modulation approach in which a pair of LED light sources in a car (either rear LEDs or front LEDs) is used as a transmitter. A typical camera (i.e. low frame rate at no greater than 30fps) that either a global shutter camera or a rolling shutter camera can be used as a receiver. The modulation scheme is a part of our Image Sensor Communication proposal submitted to IEEE 802.15.7r1 (TG7r1) recently. Also, a neural network approach is applied to improve the performance of LEDs detection and decoding under the noisy situation. Later, some analysis and experiment results are presented to indicate the performance of our system

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.7
• /
• pp.3678-3698
• /
• 2017

With the rapid development of vehicular ad hoc Network (VANET), it has gained significant popularity and received increasing attentions from both academics and industry communities in aspects of security and efficiency. To address the security and efficiency issues, a self-authentication and deniable efficient group key agreement protocol is proposed in this paper. The scheme establishes a group between road side units (RSUs) and vehicles by using self-authentication without certification authority, and improves certification efficiency by using group key (GK) transmission method. At the same time, to avoid the attacker attacking the legal vehicle by RSUs, we adopt deniable group key agreement method to negotiation session key (sk) and use it to transmit GK between RSUs. In addition, vehicles not only broadcast messages to other vehicles, but also communicate with other members in the same group. Therefore, group communication is necessary in VANET. Finally, the performance analysis shows superiority of our scheme in security problems, meanwhile the verification delay, transmission overheard and message delay get significant improvement than other related schemes.

• International Journal of Computer Science & Network Security
• /
• v.21 no.8
• /
• pp.55-64
• /
• 2021

In the last few years, the massive development in wireless networks, high internet speeds and improvement in car manufacturing has shifted research focus to Vehicular Ad-HOC Networks (VANETs). Consequently, many related frameworks are explored, and it is found that security is the primary issue for VANETs. Despite that, a small number of research studies have taken into consideration the identification of performance standards and parameters. In this paper, VANET security frameworks are explored, studied and analysed which resulted in the identification of a list of performance evaluation parameters. These parameters are defined and categorized based on the nature of parameter (security or general context). These parameters are identified to be used by future researchers to evaluate their proposed VANET security frameworks. The implementation paradigms of security frameworks are also identified, which revealed that almost all research studies used simulation for implementation and testing. The simulators used in the simulation processes are also analysed. The results of this study showed that most of the surveyed studies used NS-2 simulator with a percentage of 54.4%. The type of scenario (urban, highway, rural) is also evaluated and it is found that 50% studies used highway urban scenario in simulation.