• 산업경영시스템학회지
• /
• 제34권1호
• /
• pp.9-13
• /
• 2011

The purpose of this study was to investigate the effects of the secondary tasks such as sending text message (STM) and searching navigation (SN) on skin conductance level (SCL) and deviation of vehicle speed during driving. The participants included 30 healthy adults; 14 males aged $25.2{\pm}0.9$ with $1.9{\pm}1.8$ years of driving experiences and 16 females aged $22.6{\pm}1.9$ with $1.2{\pm}0.8$ years of driving experiences. All subjects were instructed to keep a constant speed (80km/h or 100km/h). SCL and deviation of vehicle speed were measured during driving only and driving with secondary tasks. SCL and deviation of vehicle speed were more increased during the driving with secondary tasks than driving only. Secondary tasks increased an activation of sympathetic nerve system and decreased driving performance. However, there were no significant differences in the SCL and deviation of vehicle speed according to gender and speed.

• 대한의용생체공학회:의공학회지
• /
• 제38권1호
• /
• pp.32-42
• /
• 2017

The aim of this study was to evaluate driving performance of Healthy and disabled groups (with or without driver's license) to control steering wheel by using steering assistive devices in the driving simulator. The persons with partial loss of use of all four limbs have problems in operation of the motor vehicle because of functional loss to operate steering wheel. Therefore, if steering assistive devices for grasping the steering wheel are used to control the vehicle on the road in persons with disabilities, the disabled persons can improve mobility in their community life by driving a motor vehicle safely. Ten healthy subjects (with or w/o driver's license) and ten subjects with physical disabilities (with or w/o driver's license) were involved in this study to evaluate driving performance to operate steering wheel by using four types of steering assistive devices (Single-pin, V-grip, Palm-grip, Tri-pin) in driving simulator. STISim Drive 3 software was used to test the steering performance in four scenarios: straight road at low and high speed of vehicle (40 km/h and 80 km/h), curved road at low and high speed of vehicle (40 km/h and 80 km/h). This study used two-way ANOVA in order to compare the effects of two factors (type of steering assistive device and subject group) in the three dependent variables of driving performance (the lateral position of vehicle, standard deviation of lateral position representing the variation of the left and right movement of the vehicle and the number of line crossing). The mean values of the three dependent variables (lateral position, standard deviation of lateral position, the number of line crossing) of steering performance were statistically significantly smaller for the healthy or disabled groups with driver's license than the other groups without driver's license on the curved road at high speed of vehicle compared to low speed of vehicle.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.529-538
• /
• 2009

A trial run of locally-developed tilting train has been in process on Chungbuk line since the test vehicle was first produced. For the system stabilization, interface verification among the systems including track, structure, catenary and signaling system, not to mention the rolling stock, is very crucial. Therefore, in this study, the dynamic rail force of the tilting (Hanvit 200), high-speed (KTX) and general (Mugunghwa) vehicle caused by driving in transition curve track was measured. And, it compared the tilting response with the other by using the measured wheel load data in transition curve track, and then evaluated probability the range of wheel load fluctuation for the variable dynamic vertical and lateral wheel load. As a result, a range of wheel load by occured a change of cant from the high-speed and general vehicle which had fixed bogie structure was distributed throughout small deviation (${\Delta}8{\sim}13kN$). Otherwise, in case of the tilting train which was consisted of the pendulum bogie structure was distributed wide range about large deviation (${\Delta}25{\sim}28kN$) by changed of cant.

• Smart Structures and Systems
• /
• 제21권5호
• /
• pp.571-582
• /
• 2018

Track irregularities of high-speed Maglev lines have significant influence on ride comfort. Their adjustment is of key importance in the daily maintenance of these lines. In this study, an adjustment method is proposed and track irregularities analysis is performed. This study considers two modules: an inspection module and a vehicle-guideway coupling vibration analysis module. In the inspection module, an inertial reference method is employed for field-measurements of the Shanghai high-speed Maglev demonstration line. Then, a partial filtering, integration method, resampling method, and designed elliptic filter are employed to analyze the detection data, which reveals the required track irregularities. In the analysis module, a vehicle-guideway interaction model and an electromagnetic interaction model were developed. The influence of the measured line irregularities is considered for the calculations of the electromagnetic force. Numerical integration method was employed for the calculations. Based on the actual field detection results and analysis using the numerical model, a threshold analysis method is developed. Several irregularities modalities with different girder end's deviations were considered in the simulations. The inspection results indicated that long-wavelength irregularities with larger girder end's deviations were the dominant irregularities. In addition, the threshold analysis of the girder end's deviation shows that irregularities that have a deviation amplitude larger than 6 mm and certain modalities (e.g., M- and N-shape) are unfavorable. These types of irregularities should be adjusted during the daily maintenance.

• 한국ITS학회 논문지
• /
• 제20권5호
• /
• pp.75-82
• /
• 2021

국내 2020년 기준 교통사고 건수는 약 23만 건으로, 고속도로는 비반복적 정체와 높은 주행 속도로 인해 다른 도로 대비 교통사고 발생 건수당 사망자수가 2배 이상으로 나타나고 있다. 고속도로의 교통정보는 도로의 중심선을 이용한 노드, 링크를 기준으로 제공하고 있으나 세분화된 속도정보를 주지 못하고 있다. 최근 자율주행차 뿐만 아니라 일반 차량에서도 장애물 모니터링, 위치 측정을 위한 차량용 센서 장착이 일반화되고 있어, 대용량 위치 기반 데이터를 이용한 분석은 처리속도에 따라 실시간 서비스가 가능하다. 본 연구는 대용량 위치기반 개별 차량 정보의 분석을 위한 공간 기반의 맵핑 방법을 제시하였다. 경위도 각각 2개로 분할하는 4진법 기준의 분할 방법을 적용하여 개별 차량의 공간 코드를 생성하여 지오코딩 하는 방법으로 처리 속도를 대폭 증가 시켰다. 공간이 세분됨에 따라 평균속도는 유사하였으나 속도의 표준편차는 점차 감소하였으며 9회 분할 이후는 그 감소 폭이 작아 졌다.

• 한국ITS학회 논문지
• /
• 제21권2호
• /
• pp.74-84
• /
• 2022

자율주행 관련 기술의 고도화와 함께 자율차와 비자율차가 혼재된 교통 환경이 예측됨에 따라서 미시구간의 차량 속도정보 예측은 안전한 교통 환경 구축에 가장 중요한 정보 중 하나로 판단되고 있다. 하지만, 현재 제공되는 링크 기준 미시구간 주행 속도는 속도 변화 구간을 정확하게 반영하지 못하는 한계가 있다. 본 연구에서는 미시구간 속도정보 서비스를 위한 개별 차량 빅데이터 기반의 공간 분할 방안을 제시한다. 본 연구에서는 차량 빅데이터를 이용한 동질속도구간 도출과 지오해시 기반의 단계적 구간 분할을 통하여 미시적 속도 정보 변화 지점을 분류하였다. 경부고속도로 경기지역에 대하여 제안된 방법을 적용한 결과 해당 구간 도로는 130 및 170개의 동질속도구간으로 세분되었다. 본 연구에서는 결과 분석을 통하여 제안된 방법은 기존 링크 기반 정보에 비하여 정밀하고 정확한 속도 정보 제공이 가능함을 제시하였으며, 개별 차량 빅데이터를 이용한 미시적 속도 정보 제공을 위한 구간 세분화가 필요함을 검증하였다.

• 한국ITS학회 논문지
• /
• 제20권6호
• /
• pp.47-54
• /
• 2021

국내 고속도로 교통사고 건수는 2020년 기준 약 4천건으로, 비반복적 정체와 높은 주행속도로 인해 다른 도로 대비 교통사고 발생 건수 당 사망자 수는 약3.7배에 달한다. 고속도로의 사고 유형은 측면충돌 및 추돌사고가 대부분을 차지하며, 주요 요인 중 하나는 분·합류부, 사고 등으로 야기되는 위험 교통류라고 할 수 있다. 따라서, 고속도로와 같은 연속류에서 나타나는 위험 교통류는 운전자에게 사고 방지를 위한 중요한 정보라고 할 수 있다. 본 연구에서는 개별차량 정보를 이용하여 속도의 변화 지점과 차로별 속도 차이가 발생하는 구간 등 위험 교통류를 분류하고자 하였다. 지오해시 기반으로 공간을 분리하였으며, 동일 구간 내에서 개별 차량의 속도 차이를 나타낼 수 있는 공간평균속도와 차량간 속도 편차를 이용하여 속도의 동질 구간을 분류하였다. 그 결과 고속도로 위험 구간 정보를 제공할 수 있는 분류부 영향권 구간과 위험 교통류 구간을 추출하였다.

• 제어로봇시스템학회논문지
• /
• 제7권3호
• /
• pp.238-245
• /
• 2001

This paper describes a method for detecting a close leading vehicle using the contour of the vehi-cles rear wheels. The contour of a leading vehicles rear wheels in 속 front road image from a B/W CCD camera mounted on the central front bumper of the vehicle, has vertical components and can be discerned clearly in contrast to the road surface. After extracting positive edges and negative edges using the Sobel op-erator in the raw image, every point that can be recognized as a feature of the contour of the leading vehicle wheel is determined. This process can detect the presence of a close leading vehicle, and it is also possible to calculate the distance to the leading vehicle and the lateral deviation angle. This method might be useful for developing and LSA (Low Speed Automation) system that can relieve drivers stress in the stop-and-go traffic conditions encoun-tered on urban roads.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1074-1079
• /
• 2011

This paper describes the influence on the nonlinear critical speed results of a specific railway vehicle depending on various constraint conditions. In the roller-rig tests, proper constraints are inevitable to safely hold the test vehicles. Particularly, the test results using KRRI roller-rig are more sensitive to constraint conditions because it is a kind of semi-full car type. In this study, nonlinear critical speed of specific vehicle with regards to several constraint cases were predicted by computational analysis and these results were compared to find the suitable constraint conditions. And also the deviation of semi-full car model from actual full car model was investigated. According to the bifurcation analysis, the nonlinear critical speed are dependent with the constraint condition and car-body yaw motion should be free to achieve more accurate results. And the difference between semi-full and full car model was so small that KRRI's semi-full car model are valid as long as the stability is concerned.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 2007년도 제55회 학술발표회논문집
• /
• pp.306-314
• /
• 2007

본 연구에서는 도로의 평면선형 설계일관성을 평가하기 위한 지표 및 모형을 개발하였다. 도로선형 설계 일관성은 운전자의 기대와 도로 기하구조의 일치성에 달려 있기 때문에 일관성 평가지표는 운전자의 행태특성을 잘 반영할 수 있어야 한다. 따라서 본 연구에서는 이를 고려한 새로운 평가지표의 개발과 도로 선형조건에 따른 평가지표들이 어떻게 변하는지를 파악하여 안전성을 평가하는 방안을 강구하였다. 본 연구에서는 차량간격과 속도편차를 새로운 평가지표로 제안하였다. 제안된 평가지표는 신설도로뿐만 아니라 기존도로의 선형일관성 평가로 도로의 안전성을 향상시킬 것으로 판단된다.