• 한국자동차공학회논문집
• /
• 제20권6호
• /
• pp.39-45
• /
• 2012

More than 80 percent of traffic accidents related with lane departure believed to be the result of crossing the lane due to either negligence or drowsiness of the driver. Lane-departure related accident in the highway usually involve high fatality. Even though LDWS is believed to prevent accident 25% and reduce fatalities by 15% respectively, its effectiveness in performance is yet to be confirmed in many aspects. In this study, the vehicle lateral locations relative to warning zone envelop (earliest and latest warning zone) defined in ISO standard, ECE and NHTSA regulations are compared with respect to various factors including delays, vehicle speed and vehicle heading angle with respect to the lane. Since LDWS is designed to be activated at the speed over 60 km/h, vehicle speed range for the study is set to be from 60 to 100 km/h. The vehicle heading angle (yaw angle) is set to be up to 5 degree away from the lane (abrupt lane change) considering standard for lane change test using double lane-change test specification. The TLC is calculated using factors like vehicle speed, yaw angle and reaction time. In addition, the effect of vehicle type has been considered to assess LDWS safety.

• 자동차안전학회지
• /
• 제7권1호
• /
• pp.40-44
• /
• 2015

In recent years, WorldSID dummy has been continuously developed and investigated to be a better represent biolfidelic ATD as well as a device for replacement of the current existing EuroSID-2. In Korea, the side impact accident is one of the major severe accidents in terms of numbers of accidents and fatality. Since 2003, 50kph 90degree side crash test has been initiated as a safety standard with EuroSID-1 at the first stage and also same time 55kph impact speed test has been conducted as a part of KNCAP program. Currently only EuroSID-2 is accepted as a regulatory tool for vehicle certification and KNCAP. In order to make use of WorldSID of KNCAP in the distant futuer the tests with WorldSID is conducted experimentally.

• 자동차안전학회지
• /
• 제14권1호
• /
• pp.6-13
• /
• 2022

The Ministry of Land, Infrastructure and Transport (MoLIT) and the Korean Automobile Testing and Research Institute (KATRI) are supporting the development of Lv.3 automated vehicle (hereinafter, AV) technology by constructing an automated driving pilot city (as known as K-City) equipped with total 5 evaluation environments (urban, motorway, suburban, community road, and autonomous parking facility) which is a test bed exclusively for AV (2017~2018). An upgrade project is in a progress to materialize harsh environments such as bad weather (rain, fog, etc.) and reproduction of communication jamming (GPS blocking, etc.) with the purpose of supporting the development of Lv.4 connected & automated vehicle (hereinafter, CAV) technology (2019~2022). We intend to proactively establish a national level standard for CAV test-bed and test road requirements, test method, etc. for establishment of a road map for the construction of the test bed which is being promoted step by step and analyze and, when required, benchmark the case of China that has announced and is utilizing it. Through this, we plan to define standardized requirements (evaluation facility, evaluation system, etc.) on the test bed for the development of Lv.4/4+ CAV technology and utilize the same for the design and construction of a test bed, establishment of a road map for the construction of a real car-based test environment related to the support for autonomous driving service substantiation, etc. through provision of an evaluation environment utilizing K-City, and the establishment of a K-City upgrade strategies, etc.

• 자동차안전학회지
• /
• 제10권2호
• /
• pp.20-28
• /
• 2018

Currently, sharp increase of car is on the rise as a serious social problem due to loss of lives from car accident and environmental pollution. There is a study on ITS (Intelligent Transportation System) to seek coping measures. As for the commercialization of ITS, we aim for occupancy of world market through ASV (Advanced Safety Vehicle) related system development and international standardization. However, the domestic environment is very insufficient. Core factor technologies of ITS are Adaptive Cruise Control, Lane Keeping Assist System, Forward Collision Warning System, AEB (Autonomous Emergency Braking) system etc. These technologies are applied to cars to support driving of a driver. AEB system is stop the car automatically based on the result decided by the relative speed and distance with obstacle detected through sensor attached on car rather than depending on the driver. The purpose of AEB system is to measure the distance and speed of car and to prevent accident. Thus, AEB will be a system useful for prevention of accident by decreasing car accident along with the development of automobile technology. This study suggests a scenario to suggest a test evaluation method that accords with domestic environment and active response of international standard regarding the test evaluation method of AEB. Also, by setting the goal with function for distance, it suggests theoretic model according to the result. And the study aims to verify the theoretic evaluation standard per proposed scenario using car which is installed with AEB device through field car driving test on test road. It will be useful to utilize the suggested scenario and theoretical model when conducting AEB test evaluation.

• Journal of Positioning, Navigation, and Timing
• /
• 제11권4호
• /
• pp.389-395
• /
• 2022

In order to ensure reliability the high-level automated driving such as Advanced Driver Assistance System (ADAS) and universal robot taxi provided by autonomous driving systems, the operation with high integrity must be generated within the defined Operation Design Domain (ODD). For this, the position and posture accuracy requirements of autonomous driving systems based on the safety driving requirements for autonomous vehicles and domestic road geometry standard are necessarily demanded. This paper presents localization requirements for safe road driving of autonomous ground vehicles based on the requirements of the positioning system installed on autonomous vehicle systems, the domestic road geometry standard and the dimensions of the vehicle to be designed. Based on this, 4 Protection Levels (PLs) such as longitudinal, lateral, vertical PLs, and attitude PL are calculated. The calculated results reveal that the PLs are more strict to urban roads than highways. The defined requirements can be used as a basis for guaranteeing the minimum reliability of the designed autonomous driving system on roads.

• 자동차안전학회지
• /
• 제13권2호
• /
• pp.7-14
• /
• 2021

Recently, the amount of electrical and electronic systems is increasing rapidly with the development of advanced vehicles such as ADAS, smart cars, connected cars, automated driving systems. It is necessary to examine the electromagnetic compatibility of vehicles equipped with those systems. The standards and regulations for examination of electromagnetic compatibility have been established and revised according to newly introduced electrical and electronic systems. They are administered in some different international standard associations such as ISO, CISPR, UN/ECE and are somewhat complex and bulky. In the study, the improvements and changes in them are tracked and analyzed chronologically. Research of the history of them will be helpful for understanding progress and forecasting the direction of development.

• 자동차안전학회지
• /
• 제14권3호
• /
• pp.30-34
• /
• 2022

The CFT(Cornering Fatigue test) and RFT(Radial Fatigue Test) are tests for evaluating the endurance of the disc and rim region of the wheel. In recent, automobile wheel safety standards have been revised and the applied load and target life criteria are different from existing conditions. The verification evaluation of all wheels requires a lot of time and cost. In this study, the endurance severity of each test was compared through strain-life approach by selecting 4 steel and 8 aluminum wheels.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1160-1165
• /
• 2008

The development of a new railway vehicle is under progress through the Next Generation High-Speed Rail Development Project in Korea. Its aim is to develope fundamental technology of the vehicle that can run over 400km/h. The new distributed traction bogie system, 'HEMU'(High-speed Electric Multiple Unit), will be used and is different from previously developed high speed railway vehicles. Previous vehicles adopted push-pull type system, which means one traction-car drives rest of the vehicle. Due to the difference, investigation on dynamic behavior and its safety evaluation are necessary, as a part of verification of the design specification. In this paper, current progresses of researches are presented. And the High-Speed Railway vehicle system is evaluated for a dynamic characteristic simulation. Proper models including air-suspension system, wheel-rail, bogie and car-body will be developed according to the vehicle simulation scenario. International safety standard will be applied for final verification of the system. This research can propose a better solution when test running shows a problem in the parts and elements. Finally, the vehicle that has excellent performance will be developed, promoting academic achievement and technical development.

• 자동차안전학회지
• /
• 제9권2호
• /
• pp.6-12
• /
• 2017

An autonomous driving system based on a precise digital map is developed. The system is implemented to the Hyundai's Tucsan fuel cell car, which has a camera, smart cruise control (SCC) and Blind spot detection (BSD) radars, 4-Layer LiDARs, and a standard GPS module. The precise digital map has various information such as lanes, speed bumps, crosswalks and land marks, etc. They can be distinguished as lane-level. The system fuses sensed data around the vehicle for localization and estimates the vehicle's location in the precise map. Objects around the vehicle are detected by the sensor fusion system. Collision threat assessment is performed by detecting dangerous vehicles on the precise map. When an obstacle is on the driving path, the system estimates time to collision and slow down the speed. The vehicle has driven autonomously in the Hyundai-Kia Namyang Research Center.

• 한국학교보건학회지
• /
• 제19권2호
• /
• pp.105-115
• /
• 2006

Purpose：This thesis was performed to evaluate the effect of the experience safety education on the safety behavior and standard of habit to the middle school students of one islands. Methods：The participants of this study included 43, located in the adjoining region in S county. While one of the class, composed of 19 students was designated as an experimental group, and the other class, composed of 24 students, was compared as a control group. Used program in this study was safety education program, 'Safe School, Safe Life' which was developed by Korea Occupational Safety & Health Agency. This program has emphasis on the virtual case rather than lecture style education. Results：The findings in this research were as follows. Indoor safety behavior was significant difference between the two groups. On the other hand, the effect on outdoor safety behavior was not difference. In playground case, active strength was needed without continuous attention. The effect of the experience safety behavior education was not shown in the area of traffic rules, pedestrian safety, and vehicle safety. But home safety behavior was effective. Education program on the manners of standard life habit gives positive results. But in the area of rules, this program was not effective, since students had tendency to emphasize the rigid scale rather than manners. Conclusion：These findings in the study give us the necessity of experience safety education program to prepare various situations of everyday life and to reinforce safety behavior and improve standard life habit.