• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.124-140
• /
• 2017

There exists a limitation to provide proper advance information for safe maneuvering through guidance and caution signs in freeway mobile work zones, unlike fixed work zones. Although a work-protection vehicle is currently deployed at the rear of the work vehicle, more active countermeasures to prevent crashes are required. The purpose of this study was to propose a method to evaluate the safety in mobile work zones and to present effective countermeasures. Driving simulation experiments were conducted to analyze characteristics of driver's behavior in mobile and fixed work zones. Safety distance index (SDI) based on the comparison of stopping distances of a work-protection vehicle and a following subject vehicle was used to evaluate traffic safety. More dangerous driving behavior was observed in the mobile work zone. Especially, it was identified that the lane-change of vehicles following the work- protection vehicle was late. Therefore, it is necessary to actively introduce methods to provide warning information so that the driver can recognize the work-protection vehicle in advance and carry out appropriate evasive maneuvers.

• Journal of Korean Society of Transportation
• /
• v.12 no.1
• /
• pp.5-24
• /
• 1994

The purpose of this study is to develop an accident hazard index model in order to be used for the evaluation of regional traffic safety and to develop a driver violation index model in order to identify the primary causes of traffic accidents. The accident hazard index model was developed considering the accident rates based on population and the vehicle registration. The driver violation index model was developed considering the accident rates of each item of driver violation. Using the models developed in this study, it is identified that in the provincial level analysis the degree of the traffic safety of Chungbuk, Chungnam, and Kyungbuk Province are evaluated to be low. In the county level analysis of Kyungnam Province, the degree of the traffic safety of Yangsan, Euirung, Haman, Sachun and Tongyung County are evaluated to be low. Also, it is found that the major driver violations causing accidents in the nation are driving by unlicensed drives, improper passing, and improper railroad crossing : in Kyungnam Province, improper passing is the most driver violation.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.3
• /
• pp.217-227
• /
• 2013

Objective: The purpose of this study was to analyze 'response time', 'peak response time' and 'overshoot value' for each muscle by applying the EMG signal to the vehicle response in ISO 7401 and to quantify the response of the driver according to vehicle characteristics by comparing vehicle characteristics and muscle responses of the driver. Background: The Open-loop test defined in international standards ISO 7401 is the only method for evaluating the performance of the vehicle. However, this test was focused only on mechanical responses, not driver's ones. Method: One skilled male driver(22 yrs. experience) was participated in this experiment to measure muscle activities of the driver in transient state. Then the seven muscle signals were applied to calculate 'response time', 'peak response time', and 'overshoot value'. Results: In the analyses of the EMG data, the effects of vehicle type and muscle were statistically significant on the 'response time' and 'peak response time'. Also, the effects of vehicle type, muscle, and lateral acceleration level were statistically significant on the 'overshoot value' in this study. According to the analyses of the vehicle motion data, vehicle motion variable(LatAcc, Roll, YawVel) was statistically significant on the 'response time' and vehicle type, vehicle motion variable, and lateral acceleration level were statistically significant on the 'peak response time', respectively. Conclusion: In the analyses of the 'response time' and 'overshoot value', the data of muscle activities(EMGs) was better index that could evaluate the vehicle characteristic and performance than the data of vehicle motion. In case of peak response time, both EMG and vehicle motion data were good index. Application: The EMGs data from a driver might be applicable as index for evaluation of various vehicle performances based on this study.

• Journal of the Korean Society of Safety
• /
• v.28 no.2
• /
• pp.78-83
• /
• 2013

The traffic culture index is used as a major index in evaluating the traffic safety services of local governments and also serve as important data for the planning and implementation of traffic safety services. However, as the traffic culture index gradually became a standard for comparison among local governments, in part, certain cases arose which questioned the grounds for selecting variables for the index and the validity of the index in terms of its influential relationship between evaluation items. This study analyzed the index's influential relationship by utilizing a PLS structural equation model based on the evaluation results of the 2011 traffic culture index. A variable-linking model was created which recognized the relativity taking into account of the indirect effects between latent variables and this model was proven to be a model suitable in explaining the traffic culture index with a 97.8% explanation power. It was found that traffic safety(0.530), driving behavior(0.527), pedestrian behavior(0.187) and vulnerable road users(0.147), in such order, had an effect on the traffic culture index. It was also found that human casualties due to traffic accidents under "traffic safety" and traffic light compliance rate under "driving behavior" had an important effect. The study showed that motor vehicle share in illegal parking in school zones did not have a valid explanation power regarding "vulnerable road users".

• Journal of Environmental Science International
• /
• v.28 no.12
• /
• pp.1133-1145
• /
• 2019

Successful launch requires state-of-the-art launch vehicle technology and constant test operations, However, the meteorological threat to the launch vehicle flight trajectory is also an important factor for launch success. Atmospheric stability above the Naro Space Center at the this time is very important, especially because the initial flight operation can determine the success of the launch. Moreover, during the flight of launch vehicle with rapid pressure and thrust into the atmosphere, convection activity in the atmosphere may create environmental conditions that cause severe weather threats such as thunderstorms. Hence, studies of atmospheric instability characteristics over the Naro Space Center are a necessary part of successful launch missions. Therefore, the main aims of this study were to (1) verify the atmospheric stability index and convection activity characteristics over the Naro Space Center using radiosonde data observed from 2007 to 2018 by the Naro Space Center, (2) analyze changes in the atmospheric stability index according to monthly and seasonal changes, and (3) assess how the calculated atmospheric stability index is related to actual thunderstorm occurrence using statistical analysis. Additionally, we aimed to investigate the atmospheric characteristics above the Naro Space Center through the distribution chart of the atmospheric stability index during summer, when convection activity is highest. Finally, we assessed the relationship between lightning occurrence and unstable atmospheric conditions, through predictability analysis performed using the lightning observation data of the Korea Meteorological Administration.

• Journal of Auto-vehicle Safety Association
• /
• v.5 no.2
• /
• pp.17-23
• /
• 2013

This paper describes an algorithm for Advanced Emergency Braking(AEB) with tire-road friction coefficient estimation. The AEB is a system to avoid a collision or mitigate a collision impact by decelerating the car automatically when forward collision is imminent. Typical AEB system is operated by Time-to-collision(TTC), which considers only relative velocity and clearance from control vehicle to preceding vehicle. AEB operation by TTC has a limit that tire-road friction coefficient is not considered. In this paper, Tire-road friction coefficient is also considered to achieve more safe operation of AEB. Interacting Multiple Model method(IMM) is used for Tire-road friction coefficient estimation. The AEB algorithm consists of friction coefficient estimator and upper level controller and lower level controller. The numerical simulation has been conducted to demonstrate the control performance of the proposed AEB algorithm. The simulation study has been conducted with a closed-loop driver-controller-vehicle system using using MATLAB-Simulink software and CarSim Vehicle model.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.4
• /
• pp.129-143
• /
• 2021

This paper proposes actuator fault detection and adaptive fault-tolerant control algorithms using performance index and human-like learning for longitudinal autonomous vehicles. Conventional longitudinal controller for autonomous driving consists of supervisory, upper level and lower level controllers. In this paper, feedback control law and PID control algorithm have been used for upper level and lower level controllers, respectively. For actuator fault-tolerant control, adaptive rule has been designed using the gradient descent method with estimated coefficients. In order to adjust the control parameter used for determination of adaptation gain, human-like learning algorithm has been designed based on perceptron learning method using control errors and control parameter. It is designed that the learning algorithm determines current control parameter by saving it in memory and updating based on the cost function-based gradient descent method. Based on the updated control parameter, the longitudinal acceleration has been computed adaptively using feedback law for actuator fault-tolerant control. The finite window-based performance index has been designed for detection and evaluation of actuator performance degradation using control error.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.2
• /
• pp.26-38
• /
• 2022

This paper proposes multiple RLS and actuator performance index-based adaptive actuator fault-tolerant control and detection algorithms for longitudinal autonomous driving. The proposed algorithm computes the desired acceleration using feedback law for longitudinal autonomous driving. When actuator fault or performance degradation exists, it is designed that the desired acceleration is adjusted with the calculated feedback gains based on multiple RLS and gradient descent method for fault-tolerant control. In order to define the performance index, the error between the desired and actual accelerations is used. The window-based weighted error standard deviation is computed with the design parameters. Fault level decision algorithm that can represent three fault levels such as normal, warning, emergency levels is proposed in this study. Performance evaluation under various driving scenarios with actuator fault was conducted based on co-simulation of Matlab/Simulink and commercial software (CarMaker).

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.768-773
• /
• 2003

The inspection of track irregularity, which is the most important index for the evaluation of the dynamic safety of the rolling stock, is performed by setting up the testing train set. The self-diagnosis for the various rolling stocks and railways can be obtained if it is possible to take the simultaneous inspection of track irregularity for the commercial vehicle while it is running and to build up a dynamic safety evaluation system. It is expected to have some good effects, such as preventing accident with the low dynamic safety, cutting cost for the testing train set and evaluating the exact influence on the rolling stock and railway. In this study, innertial measuring method, which allows us to directly measure the track irregularity from the commercial vehicle, will be considered and some overseas cases will be explored as well.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.6
• /
• pp.31-37
• /
• 2010

In proportion to increasing interest in vehicle safety, many country have regulated vehicle safety and performed NCAP(New Car Assessment Program). However vehicles which had good results in these compliance and NCAP frontal crash test have caused problems such as the fork effect and over-riding in real car-to-car accidents. To complement these issues, new frontal crash test modes using new barrier like FWDB and PDB have been developed by EEVC WG15. In this paper, FWDB frontal crash test was performed and the result was compared with the full frontal crash test using the rigid wall in order to comprehend the characteristic of FWDB. The results of FWDB test were compared with one of USNCAP and KNCAP. Using USNCAP data, vehicle performance like deformation and wall force were studied. A comparative study of dummy injuries was made by using KNCAP result. The results showed that vehicle performance of FWDB test like displacement and effective acceleration was similar in spite of absorbing energy of FWDB due to the greater vehicle deformation of rigid wall test. In FWDB test, driver dummy head bottomed out but most of injuries were superior to the injury of rigid wall test.