• Composites Research
• /
• v.37 no.1
• /
• pp.46-52
• /
• 2024

The development of transportation methods has improved human transportation convenience and made it possible to expand the travel radius of people with disabilities who have difficulty moving. However, in the case of WAV (wheelchair Accessible Vehicle), the safety that may occur in a vehicle accident is still lower than that of regular passenger seats. In particular, in the case of a rear-end collision that may occur in a defenseless situation, it can cause fatal neck injuries to disabled passengers. Therefore, a more detailed design plan must be reflected in the headrest to be applied to WAV. In this study, a multi-cell headrest was proposed to implement local compression characteristic distribution of the headrest during rear-end collision of WAV. Afterwards, a correlation analysis was performed between the passenger's NIC (Neck Injury Criterion) and impact energy absorption using the data set construction through analysis and the clustering results using k-means clustering. As a result of clustering, it was confirmed that data clusters with similar characteristics were formed, and a correlation analysis between NIC and impact energy absorption through the characteristics of each cluster was performed. As a result of the analysis, it was confirmed that the softer the cell compression characteristics in Mid3 and Mid6, the more impact energy absorption increases, and the harder the cell compression characteristics in Front2, Mid3, and Mid6, the more effective it is in reducing NIC.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1178-1185
• /
• 2010

Recently, high speed of container freight cars is causing fatigue damage of wheel. Sudden failure accidents cause a lot of physical and human damages. Therefore, damage analysis for wheel prevents failure accident of container freight car. Wheel receives mechanical and thermal loads at the same time while rolling stocks are run. The mechanical loads applied to wheel are classified by the horizontal load from contact of wheel and rail in curve line section and by the vertical force from rolling stocks weight. Also, braking and deceleration of rolling stocks cause repeated thermal load by wheel tread braking. Specially, braking of rolling stocks is frictional braking method that brake shoe is contacted in wheel tread by high breaking pressure. Frictional heat energy occurs on the contact surface between wheel tread and brake shoe. This braking converts kinetic energy of rolling stocks into heat energy by friction. This raises temperature rapidly and generates thermal loads in wheel and brake shoe. There mechanical and thermal loads generate crack and residual stress in wheel. Wetenkamp estimated temperature distribution of brake shoe experimentally. Donzella proposed fatigue life using thermal stress and residual stress. However, the load applied to wheel in aforementioned most researches considered thermal load and mechanical vertical load. Exact horizontal load is not considered as the load applied to wheel. Therefore, above-mentioned loading methods could not be applied to estimate actual stress applied to wheel. Therefore, this study proposed safety estimation on wheel of freight car using heat-structural coupled analysis on the basis of loading condition and stress intensity factor.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.1
• /
• pp.26-37
• /
• 2017

The study is to develop safety performance functions(SPFs) for urban intersections using random effects Tobit regression model and to analyze correlations between crashes and factors. Also fixed effects Tobit regression model was estimated to compare and analyze model validation with random effects model. As a result, AADT, speed limits, number of lanes, land usage, exclusive right turn lanes and front traffic signal were found to be significant. For comparing statistical significance between random and fixed effects model, random effects Tobit regression model of total crash rate could be better statistical significance with $R^2_p$ : 0.418, log-likelihood at convergence: -3210.103, ${\rho}^2$: 0.056, MAD: 19.533, MAPE: 75.725, RMSE: 26.886 comparing with $R^2_p$ : 0.298, log-likelihood at convergence: -3276.138, ${\rho}^2$: 0.037, MAD: 20.725, MAPE: 82.473, RMSE: 27.267 for the fixed model. Also random effects Tobit regression model of injury crash rate has similar results of model statistical significant with random effects Tobit regression model.

• Journal of the Korean Society for Railway
• /
• v.19 no.1
• /
• pp.77-86
• /
• 2016

Before urban railway vehicles reach their design life-span, operating agencies should determine when to buy new vehicles. Previous LCC (Life Cycle Cost) studies were limited because they independently focused on existing vehicles based on costs that directly impacted only the operating agency without considering effects such as social costs and the reduction of maintenance costs. Thus, it is difficult to systematically determine when to buy new vehicles. This study investigated the operating and maintenance related costs, especially from additional expenses and social costs due to unexpected vehicle failures and safety accidents, and did an economic analysis of scenarios with different discount rates. Considering that the public is very concerned about safety after the Sewol ferry accident, additional costs, which include social costs, should be included in the analysis. This study shows that the economic priority of scenarios may change depending on whether those costs are included and on the discount rate. The results of this study can help in the decision-making process for the planning and buying of new trains.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.1
• /
• pp.64-73
• /
• 2015

Recently, the integrated utilization of technology with IT is in demand for the effectiveness of field management together with the prevention and prompt action on safety accident at construction site. In addition, the establishment of construction site support system is necessary to implement the securing of worker's safety, smooth work instruction, efficiency in construction, and others. Data standardization and network architecture were designed regarding data and sound information for data transmission between systems and management. These were to construct USFSS based on integrated VI-GNSS technology in this research. In the stability test of data for each system constructed through it, around 98% stability was secured between workers and for transfer vehicle system within underground structure and field server system in regards to the data transmission stability, around 100% stability was secured between field server system and control system, respectively. Also, in the sound transmission stability test, around 99% reliability could be secured with 1km distance as its standard in case of sound transmission from underground structure construction site to field office near the field through wireless FRS system.

• Journal of the Korea Convergence Society
• /
• v.12 no.5
• /
• pp.207-215
• /
• 2021

A forklift is an industrial vehicle with a power-operated fork for lifting and moving heavy loads over short distances. A significant number of accidents are caused by forklifts every year. Most of them are known to be caused by the unsafe acts of workers. However, only a few studies have focused on the risks of forklift work from the perspective of human error. In addition, various methods have been developed to analyze the risk of human error, while it is hard to find studies that directly compare the effectiveness or strengths/weaknesses of those methods. This study aims to analyze risk factors related to unsafe behavior in forklift operations using two representative human error analysis techniques, i.e., .SHERPA and HE-HAZOP, and compare their advantages and disadvantages. The analysis was performed on three main forklift operations ('unloading from the truck', 'moving and loading into the storage', and 'loading on the truck'). As a result, 118 errors and 34 remedial measures were derived by SHERPA. Through HAZOP, 139 errors and 54 measures were derived. The two techniques were compared in terms of the number of results and the method of deriving errors and remedial measures, cause analysis, and risk assessment. This study might be used to reduce human error related disasters in workplaces using forklifts. In order to provide a guide for choosing an appropriate analysis method, more comparative studies on different techniques involving wide range of tasks are needed in the future.

• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.1
• /
• pp.175-204
• /
• 2018

Recently, the aviation leisure business has been legislated, and related industries have become active base with increasing the light sports aircraft within the legislation system. However, in the light sports aircraft safety problem, it is often mentioned that the flight is in violation of the regulations, the lack of safety consciousness of the operator and lack of ability, and the personal operators have a risk of accident of light aircraft such as insufficient safety management and poor maintenance. At present, the maintenance of light sports aircraft is carried out by the A & P mechanic in accordance with the relevant laws and regulations, but it is difficult to say that it is equipped with qualification and expertise. It is not a legal issue to undertake light sports aircraft maintenance work on the regulation system. However, the problem of reliability and appropriateness is constantly being raised because airplanes, light sports aircraft, and ultra-light vehicle are classified and serviced in a legal method. Although legal and institutional frameworks for light sports aircraft are separated, much of it is stipulated in the aviation law provisions. Light sports aircraft maintenance work also follows the current aircraft maintenance system. In the United States, Europe, and Australia where General Aviation developed, legal and institutional devices related to maintenance of light aircraft were introduced, and specialized maintenance tasks are covered in the light aircraft mechanics system. As a result of analysis of domestic and foreign laws and regulations, it is necessary to introduce the qualification system for maintenance of light aircraft. In advanced aviation countries such as the United States, Europe, and Australia, a light sports aircraft repairman system is installed to perform safety management. This is to cope with changes in the operating environment of the new light sports aircraft. This study does not suggest the need for a light aircraft repairman system. From the viewpoint of the legal system, the examination of the relevant laws and regulations revealed that the supplementary part of the system is necessary. It is also require that the necessity of introduction is raised in comparison with overseas cases. Based on these results, it is necessary to introduce the system into the light aircraft repairman system, and suggestions for how to improve it are suggested.

• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.2
• /
• pp.169-197
• /
• 2018

The purpose of this study is to present a reasonable and concrete standard for the Korean aviation insurance compulsory subscription system. Through this, we aim to improve the current revision of laws and regulations, and ultimately create an environment in which the safety and property of the Korean people who use aircraft with appropriate aviation insurance can be secured. In particular, by reviewing the aviation business law and its new laws and regulations enacted in 2017, the legislative improvement direction of aviation insurance will be proposed. In order to maintain the continuous growth of the air transportation industry and to make amicable compensation for the victims, considering the characteristics of the total accident, instantness, and giganticness of air accidents in which a lot of people and property are lost in the event of an accident, adequate insurance coverage is essential. In this respect, the compulsory insurance to amend the principle of freedom of contract, which is the great principle of the modern judicial system, will be persuasive. However, in comparison with foreign legislation, the legal provisions on Korea's obligation to comply with aviation insurance need to be revised around the following issues: First, it is reasonable to enforce the regulation of the mandatory aviation insurance by legislation from the Congress not by administrative regulations. Because it will force the monetary obligations of the individual such as common air carriers. Second, our law regulations respond to various kinds of air damages by using the phrase "limit of liability stipulated in international conventions". However, as we have seen in the text, the range of compensation are various according to the use of legal instruments in international conventions such as the Montreal Convention, which governs the compensation of passengers for damages to passengers today. Third, in countries with narrow territories, such as Korea, there are big differences in flying time and insurable risk between domestic and international transportation. Therefore, it is necessary to divide domestic transportation and international transportation even in the obligation to join the insurance. This dual discipline has the advantage for rookies in air carrier market who mainly start their business from domestic service. Fourth, according to Korean law, the regulations of automobile loss insurance is applicable to the aviation mandatory insurance of unmanned aerial vehicle accident which is lack of persuasion. In the future, it will be appropriate to discipline insurance for unmanned aerial vehicles with unlimited potential for development from a long-term perspective.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.5
• /
• pp.847-856
• /
• 2016

Recently, with a high level of economic growth, rapid urbanization, population, environment and housing problems were accompanied in Korea. In particular, the traffic problem has become a serious social problem. As the current transportation policy has been carried out, concentrating on traffic flow, in 2015, death rate for pedestrians while walking (1,795 persons) is 38.8% compared to entire death rate in car accident (4,621 persons), so there is need to solve it. Although, crosswalk should make pedestrian cross it safely, it has been made on the basis of the width of road without exact standard for current width of the crosswalk and the location of stop line. Moreover, in the area around many campuses or commercial facilities, crosswalks are set with not considering pedestrian passage, but designed uniformly. Therefore, the purpose of this study is to estimate reasonable dimension of crosswalk considering pedestrian traffic and walking speed and it makes the accident rate lower in the crosswalk, which has a lot of problems including decisions of vehicle traffic signal time, lack of pedestrian's signal timing, pedestrian's crossing of long-distance. The following are the methodology of the study. Firstly, for crosswalk calculation of specifications, examination relating existing regulations and researches dealing with crosswalk, pedestrians and stop line is needed. After analyzing problems of current width of crosswalk and stop line, present the methodology to calculation of specifications and basing on these things, calculation of specifications for crosswalk will be decided. In conclusion, the calculation of specification and improvement of stop line for crosswalk laid out in this study are expected to be utilized as base data in case of establishing relevant safety facilities and standards.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.4
• /
• pp.327-339
• /
• 2022

The purpose of this study is to present the effective smoke control flow rate and mode for securing safety through quantitative risk assessment according to the smoke control flow rate and mode (supply or exhaust) of the platform when a train fire occurs at the subway platform. To this end, a fire outbreak scenario was created using a side platform with a central staircase as a model and fire analysis was performed for each scenario to compare and analyze fire propagation characteristics and ASET, evacuation analysis was performed to predict the number of deaths. In addition, a fire accident rate (F)/number of deaths (N) diagram (F/N diagram) was prepared for each scenario to compare and evaluate the risk according to the smoke control flow rate and mode. In the ASET analysis of harmful factors, carbon monoxide, temperature, and visible distance determined by performance-oriented design methods and standards for firefighting facilities, the effect of visible distance is the largest, In the case where the delay in entering the platform of the fire train was not taken into account, the ASET was analyzed to be about 800 seconds when the air flow rate was 4 × 833 m³/min. The estimated number of deaths varies greatly depending on the location of the vehicle of fire train, In the case of a fire occurring in a vehicle adjacent to the stairs, it is shown that the increase is up to three times that of the vehicle in the lead. In addition, when the smoke control flow rate increases, the number of fatalities decreases, and the reduction rate of the air supply method rather than the exhaust method increases. When the supply flow rate is 4 × 833 m³/min, the expected number of deaths is reduced to 13% compared to the case where ventilation is not performed. As a result of the risk assessment, it is found that the current social risk assessment criteria are satisfied when smoke control is performed, and the number of deaths is the flow rate 4 × 833 m³/min when smoke control is performed at 29.9 people in 10,000 year, It was analyzed that it decreased to 4.36 people.