• Journal of the Korean Institute of Gas
• /
• v.11 no.4
• /
• pp.54-58
• /
• 2007

The trailers with electronically controlled diesel engine was converted to dual fuel engine system. To estimate economical efficiency, test vehicles have been operated on a certain driving route repeatedly. Fuel economy, mximum driving distance per refueling and driveability are examined on the road including a free way. Developed vehicle can be operated over 500 km with dual Hel and shows 85% of diesel substitution ratio. Driveability is similar with but passing acceleration. It will be improved by calibration process. Test engine was set up for investigating power output, thermal efficiency and emission. ND 13-mode tests were performed for the test cycle. The emission result of dual fuel meets K2006 regulation and the engine performance of dual fuel engine was equivalent to the performance of diesel engine.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.1
• /
• pp.162-168
• /
• 2018

The UAV(Unmanned Aerial Vehicle) system, including the drone of a variety of fields, which has become an issue and utilized in various fields, has begun to develop in military fields and is actively developed in the commercial field. In various types of UAV systems, which have been developed recently, the communication system that is responsible for the connection between the ground control unit and the UAVs is called the data link. Especially, common data link used in military UAVs is required stability of communication to transmit surveillance and reconnaissance intelligence information and UAV's status. In this paper, the requirement for a modem was defined to secure the communication stability of the common data link used in surveillance UAVs. And, the design of the data link modem to satisfy applicable specifications was proposed. The proposed modem design was verified through the performance measurement of the implemented systems.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.5
• /
• pp.402-409
• /
• 2018

This paper describes the plan and procedure of a development test and evaluation that will be performed to verify the performance and technology of multi-mission unmanned surface vehicles (MMUSVs). In order to verify the design requirement of MMUSVs, we designed and manufactured the common platform of MMUSVs, which have an overall length of8.4 m, a displacement of 3,100 kg, and a speed of more than35 kts. The platform is equipped with several sub-systems, including radar and an EOTS/IRS. The EOTS/IRS, along with the search radar, is used for effective detection, identification, and targeting. The core technologies of MMUSV for DT&E will be investigated. The common platform design technologies, remote operating and control system technologies, autonomous navigation technologies, and unmanned operational technology of sensors and equipment will be studied for the development of the MMUSV's core technologies. The system will be able to make precise observations and track targets both manually and automatically during day and night conditions. Currently, the verification tests for each of the technologies and for the integrated system are in the pipeline for DT&E, which will be performed next year. Also, software reliability and life tests will be performed.

• Journal of the Korean Institute of Gas
• /
• v.19 no.6
• /
• pp.22-27
• /
• 2015

Hydrogen features highest energy density per mass and is expected to be desirable as a fuel of HALE(High altitude long endurance) UAV(Unmanned aerial vehicle). A reciprocating internal combustion engine is known to be a reliable and economic power source for this kind of UAV. Therefore, the combination of hydrogen and engine is worth of doing research. Test bench with 2.4L Spark-Ignited engine was prepared for the experiment in which start and combustion characteristics at idle condition were examined in this study. Stable hydrogen supply system and a universal ECU(Engine control unit) were also utilized for the test engine. Equivalence ratio and spark timings at idle operation were investigated and compared to the data of gasoline engine. The results will be a starting point for full-scale research of hydrogen engine for HALE UAV.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.1
• /
• pp.13-21
• /
• 2018

AGVS (Automated Guided Vehicle System) is a core technology of logistics automation which automatically moves specific objects or goods within a certain work space. Conventional AGVS generally requires the in-door localization system and each AGV equips expensive sensors such as laser, magnetic, inertial sensors for the route recognition and automatic navigation. thus the high installation cost is inevitable and there are many restrictions on route(path) modification or expansion. To address this issue, in this paper, we propose a cost-effective and scalable AGV based on a light-weight pattern recognition technique. The proposed pattern recognition technology not only enables autonomous driving by recognizing the route(path), but also provides a technique for figuring out the loc ation of AGV itself by recognizing the simple patterns(bar-code like) installed on the route. This significantly reduces the cost of implementing AGVS as well as benefiting from route modification and expansion. In order to verify the effectiveness of the proposed technique, we first implement a pattern recognition algorithm on a light-weight MCU(Micro Control Unit), and then verify the results by implementing an MCU_controlled AGV prototype.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.781-788
• /
• 2021

This paper is the study of a design to eliminate the communication error that occurs between the main controller and the servo controller of the K56 ammunition-carrying armored vehicle. The K56 assists in the operation of the K-55A1 self-propelled gun by automating the supply and loading of ammunition. The CAN communication board of the ammunition carrier is a key-function product mounted inside the main controller and installed for communication with the servo controller. It was confirmed that an undefined error would occur intermittently in the existing CAN communication board, interrupting the operation of the ammunition supply system during the loading process. In this paper, in order to solve the problem, the cause of the failure is identified through analysis and a functional test of the communication signal between the main controller and the servo controller. The error was resolved by redesigning and improving the Read/Write algorithm. Finally, the proposed cause analysis and design effectiveness were verified through the CAN communication board single item test and a system equipment application test. It is expected that this study will serve as a reference for improving defense capabilities through improving the reliability of CAN communication boards and by improving the reliability of the overall electronic equipment using DPRAM.

• Journal of Convergence for Information Technology
• /
• v.9 no.9
• /
• pp.13-19
• /
• 2019

This paper analyzed the SCMS and pilot policy, which is pursued by the U.S. government in connected vehicles. SCMS ensures authentication, integrity, privacy and interoperability. The SCMS Support Committee of U.S. government has established the National Unit SCMS and is responsible for system-wide control. Of course, it introduces security policy, procedures and training programs making. In this paper, the need for SCMS to be applied to C-ITS was discussed. The structure of the SCMS was analyzed and the U.S. government's filot policy for connected vehicles was discussed. The discussion of the need for SCMS highlighted the importance of the role and responsibilities of SCMS between vehicles and vehicles. The security certificate management system looked at the structure and analyzed the type of certificate used in the vehicle or road side unit (RSU). The functions and characteristics of the certificates were reviewed. In addition, the functions of basic safety messages were analyzed with consideration of the detection and warning functions of abnormal behavior in SCMS. Finally, the status of the pilot project for connected vehicles currently being pursued by the U.S. government was analyzed. In addition to the environment used for the test, the relevant messages were also discussed. We also looked at some of the issues that arise in the course of the pilot project.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.2
• /
• pp.168-177
• /
• 2019

KRISO (Korea Research Institute of Ship & Ocean Engineering) started a project to develop the core algorithms for autonomous intervention using an underwater robot in 2017. This paper introduces the development of the robot platform for the core algorithms, which is an ROV (Remotely Operated Vehicle) type with one 7-function manipulator. Before the detailed design of the robot platform, the 7E-MINI arm of the ECA Group was selected as the manipulator. It is an electrical type, with a weight of 51 kg in air (30 kg in water) and a full reach of 1.4 m. To design a platform with a small size and light weight to fit in a water tank, the medium-size manipulator was placed on the center of platform, and the structural analysis of the body frame was conducted by ABAQUS. The robot had an IMU (Inertial Measurement Unit), a DVL (Doppler Velocity Log), and a depth sensor for measuring the underwater position and attitude. To control the robot motion, eight thrusters were installed, four for vertical and the rest for horizontal motion. The operation system was composed of an on-board control station and operation S/W. The former included devices such as a 300 VDC power supplier, Fiber-Optic (F/O) to Ethernet communication converter, and main control PC. The latter was developed using an ROS (Robot Operation System) based on Linux. The basic performance of the manufactured robot platform was verified through a water tank test, where the robot was manually operated using a joystick, and the robot motion and attitude variation that resulted from the manipulator movement were closely observed.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.27 no.1
• /
• pp.41-64
• /
• 2014

Objectives: This study was to evaluate the effect of Jaeumkanghwa-tang (JEKHT) on the propylthiouracil (PTU)-induced rat hypothyroidism. Methods: Six groups, each of 8 rats per group were used in the present study - intact vehicle control, PTU control, Levothyroxine ($LT_4$), JEKHT 500, 250 and 125 mg/kg treated groups. JEKHT were administered once a day for 42 days as an oral dose of 500, 250 and 125 mg/kg, and hypothyroidism was induced by daily subcutaneous treatment of PTU 10 mg/kg for 28 days. The changes on the body and organ weight, serum hormone and lipid profiles, liver and testis antioxidant defense factors were observed with histopathology of organs. Results were compared with $LT_4$ 0.5 mg/kg intraperitoneally treated rats in this experiment. Results: PTU treatment, marked decrease of body weight, increases of thyroid weight, decreases of liver, testis, epididymis and prostate weights, decreases of serum Tri-iodothyronine ($T_3$), and Thyroxine ($T_4$) level with increase of serum Thyroid-stimulating hormone (TSH) level, decreases of serum testosterone and dihydrotestosterone (DHT) level with increases of serum Follicular stimulating hormone (FSH) level, increases of serum High density lipoprotein (HDL), decrease of triglyceride content, increase of serum Aspartate aminotransferase (AST) level, decreases of liver and testis antioxidant defense factors were observed. In addition, marked hyperplasia of follicular cells with decreases of follicular colloid contents and diameters was additionally demonstrated with the decrease of hepatocyte numbers per unit area due to hypertrophy of hepatocytes related to lipid droplet depositions, increase of a/oligospermatic epididymal tubules with epididymal atrophic changes, seminiferous tubular atrophy with decrease of stage I~II seminiferous tubules in testis, prostate tubular atrophic changes at histopathological inspections. However, these PTU induced hypothyroidism and related hepatic and male reproductive organ damages were favorably and dose-dependently inhibited by treatment of JEKHT 500, 250 and 125 mg/kg, and JEKHT also effectively regulated the PTU-induced abnormal antioxidant defense factor changes in the both liver and testis. Conclusions: JEKHT 500, 250 and 125 mg/kg dose-dependently inhibited PTU-induced hypothyroidism and related liver and male reproductive organ damages in rats.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.4
• /
• pp.39-45
• /
• 2016

In this study, with arbitrary reference points on the water, photogrammetry accuracy analysis was conducted using unmanned aerial vehicle(UAV). A small reservoir is a research area, and twenty buoys were used as arbitrary reference points. Errors of location coordinate were identified with control of amounts of used reference points. cases are categorized by index scores per photos. Accuracy of X is 0.141m~0.166m and accuracy of Y is 0.136m~0.241m. Considering that allowable error for the maritime boundary survey is ${\pm}2m$, it is possible to get the accuracy data available for the photogrammetry of UAV using an reference point. In addition, the coefficient of correlation between the number of reference points per unit and number of buoys used as reference point and the ratio of the reference point per square measure, and percentage of buoys used as reference point and the coefficient of x and y were performed. Each element, x, and y showed a strong correlation and the coefficient of number of buoys used as reference point was irrelevant. The results of this correlation analysis can be analyzed that the number of reference points used in each picture is greater than the actual number of reference points used in location accuracy.