• 제목/요약/키워드: Vehicle control unit

검색결과 314건 처리시간 0.026초

임베디드 웹 서버를 이용한 자동차용 모니터링 및 제어기 개발에 관한 연구 (A Study of Vehicle's Monitoring and Controller Using Embedded Web Server)

  • 양승현;김동원;이석원
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 하계학술대회 논문집 D
    • /
    • pp.2380-2382
    • /
    • 2004
  • In this paper, Web server is built up using PXA255, 32bit RISC processor with porting Embedded Linux and GoAhead, HTTP(Hyper Text Transfer Protocol) web server, and the system with can monitor and control the environment and condition for AICC(Automatic Intelligent Cruise Control) is realized. For sending the operation condition and change of vehicle the desired data is derived by interacting ECU(Electric Control Unit) and Embedded system and the rpm of engine is controlled by step motor connected to throttle value.

  • PDF

헥사로터형 무인기의 모델링과 P-PD기반 비행성능평가 (Dynamic Model and P-PD Control based Flight Performance Evaluation for Hexa-Rotor Type UAV)

  • 진태석
    • 전기학회논문지
    • /
    • 제64권7호
    • /
    • pp.1074-1080
    • /
    • 2015
  • In the last decades, the increasing interest in unmanned aerial vehicle(UAV) for military, surveillance, and rescue applications made necessary the development of flight control theory and body structure more and more efficient and fast. In this paper, we describe the design and performance of a prototype hexarotor UAV platform featuring an inertial measurement unit(IMU) based autonomous-flying for use in bluetooth communication environments. The proposed system comprises the construction of the test hexarotor platform, the implementation of an IMU, dynamic modeling and simulation in the hexarotor helicopter. Furthermore, the hexarotor helicopter with implemented IMU is connected with a micro controller unit(ARM-cortex) board. The P-PD control algorithm was used to control the hexarotor. We used the Matlab software to help us to tune the P-PD control parameters for quick response and minimizing the fluctuation. The control simulation and experiment on the real system are implemented in the test platform, evaluated and compared against each other.

융합된 다중 센서와 EKF 기반의 무인잠수정의 항법시스템 설계 (Navigation System of UUV Using Multi-Sensor Fusion-Based EKF)

  • 박영식;최원석;한성익;이장명
    • 제어로봇시스템학회논문지
    • /
    • 제22권7호
    • /
    • pp.562-569
    • /
    • 2016
  • This paper proposes a navigation system with a robust localization method for an underwater unmanned vehicle. For robust localization with IMU (Inertial Measurement Unit), a DVL (Doppler Velocity Log), and depth sensors, the EKF (Extended Kalman Filter) has been utilized to fuse multiple nonlinear data. Note that the GPS (Global Positioning System), which can obtain the absolute coordinates of the vehicle, cannot be used in the water. Additionally, the DVL has been used for measuring the relative velocity of the underwater vehicle. The DVL sensor measures the velocity of an object by using Doppler effects, which cause sound frequency changes from the relative velocity between a sound source and an observer. When the vehicle is moving, the motion trajectory to a target position can be recorded by the sensors attached to the vehicle. The performance of the proposed navigation system has been verified through real experiments in which an underwater unmanned vehicle reached a target position by using an IMU as a primary sensor and a DVL as the secondary sensor.

RFID 이용 돈사 출입 자동관리 시스템 개발 (Developement of a RFID Enterance Control System for Biosecurity of Pig Farm)

  • 김혁주;전형순;유병기
    • 한국콘텐츠학회논문지
    • /
    • 제20권3호
    • /
    • pp.31-40
    • /
    • 2020
  • 정부의 축산업 및 축산차량 등록제 실시로 인하여, 양돈농가에서는 의무적으로 출입구에 차단장치를 설치하여야 하며 출입기록을 관리하여야 한다. 또한, 양돈장의 생물보안을 위해서도 출입인원과 차량, 동물 등의 양돈장 출입과 소독기록 등을 관리하여야한다. 본 연구에서는, RFID와 웹서버 시스템을 이용한 양돈장 출입차단 및 기록장치를 개발하였다. 사람의 출입관리를 위하여 13.56MHz의 접촉식 RFID 시스템을 개발하였으며, 차량 출입관리를 위해서는 900MHz RFID 시스템을 이용한 차량인식 시스템을 개발하였다. 시험결과 시스템 작동, 인식, 웹서버 데이터 저장 등의 성능이 양호한 것으로 판단되었다. 이후, 차량 출입시스템과 사람 출입 및 소독기록장치를 연동하여 시험을 실시하였으며, 기록된 데이터는 전용 프로그램을 이용하여 웹서버의 DB에 저장하였다. 성능시험결과, 출입관리와 데이터관리에 문제가 없는 것으로 판단되었다.

An App Visualization design based on IoT Self-diagnosis Micro Control Unit for car accident prevention

  • Jeong, YiNa;Jeong, EunHee;Lee, ByungKwan
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제11권2호
    • /
    • pp.1005-1018
    • /
    • 2017
  • This paper proposes an App Visualization (AppV) based on IoT Self-diagnosis Micro Control Unit (ISMCU) for accident prevention. It collects a current status of a vehicle through a sensor, visualizes it on a smart phone and prevents vehicles from accident. The AppV consists of 5 components. First, a Sensor Layer (SL) judges noxious gas from a current vehicle and a driver's driving habit by collecting data from various sensors such as an Accelerator Position Sensor, an O2 sensor, an Oil Pressure Sensor, etc. and computing the concentration of the CO collected by a semiconductor gas sensor. Second, a Wireless Sensor Communication Layer (WSCL) supports Zigbee, Wi-Fi, and Bluetooth protocol so that it may transfer the sensor data collected in the SL to ISMCU and the data in the ISMCU to a Mobile. Third, an ISMCU integrates the transferred sensor information and transfers the integrated result to a Mobile. Fourth, a Mobile App Block Programming Tool (MABPT) is an independent App generation tool that changes to visual data just the vehicle information which drivers want from a smart phone. Fifth, an Embedded Module (EM) records the data collected through a Smart Phone real time in a Cloud Server. Therefore, because the AppV checks a vehicle' fault and bad driving habits that are not known from sensors and performs self-diagnosis through a mobile, it can reduce time and cost spending on accidents caused by a vehicle's fault and noxious gas emitted to the outside.

전자유압식 CVT의 운용 및 제어 소프트웨어 개발과 실시간 제어 (Development of an operation and control software for electro-hydraulic)

  • 권혁빈;김광원;김현수;은탁;박찬일
    • 오토저널
    • /
    • 제15권3호
    • /
    • pp.36-46
    • /
    • 1993
  • In CVT vehicle, the engine speed is completely decoupled from the vehicle speed within the range from maximum transmission ratio to minimum transmission ratio. This allows the engine to operate in optimal state(e.g. best fuel economy or maximum power mode.) In this study, the CVT control algorithm for optimal operation of engine is suggested. In order to implement the real time digital control of electro-hydraulic CVT system, a software called CVTCON has been developed. CVTCON also includes the CVT operation module, (2) system test module, (3) system control module and (4) data management module. By using the CVTCON and the electro-hydraulic CVT system, two modes of experiments were carried out: constant throttle opening mode and acceleration mode. From the experimental result, it was found that the algorithm suggested in this study showed optimal operation of the CVT system.

  • PDF

자동차 환경에서 스마트 모바일 블랙박스 DVR (Smart Mobile Blackbox DVR in Car Environment)

  • 최선오;김영포;임용순;김영자;강은영
    • 한국인터넷방송통신학회논문지
    • /
    • 제13권5호
    • /
    • pp.9-15
    • /
    • 2013
  • 본 논문에서는 사고 자동인식 서비스 제공과 위험 운전 여부 등을 통하여 운전자의 운전습관을 교정해 주고 사고 전후의 동영상을 재현하는 확장성이 높은 모바일 블랙박스 DVR (SMBD, Smart Mobile Blackbox DVR) 컴퓨터의 모델링 설계를 하였다. SMBD는 임베디드 시스템에 무선 기능을 탑재하여 차량이 휴면상태에서도 사고발생 지점과 영상정보를 무선통신을 이용하여 24시간 관제센터에 통보함으로써 긴급구난 서비스 및 교통정보를 제공 받을 수 있다. 또한 차량 ECU(Electronic Control Unit)의 차량정보 및 센서 데이터와 연동하여 무선 eCall (Emergency Call) 서비스를 실현할 수 있다.

공압식 능동 엔진 마운트 개발 (Development of Pneumatic Active Engine Mount)

  • 최재용;이우현;김정훈;이동욱
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2008년도 추계학술대회논문집
    • /
    • pp.282-283
    • /
    • 2008
  • According to the development of vehicle technique, the improved NVH performance is required in the vehicle which have the high effectiveness and the high output of the powertrain. This vehicle has to be adapted to active engine mounting system to reduce the vibration in accordance with various vehicle information. The pneumatic active engine mounting system is consist with engine mount, solenoid valve, air tank and control unit totally. The important technique of this system is to reduce the vibration by the air pressure. This paper contains the development process of the pneumatic active engine mounting system and confirm the performance of this system test and vehicle test.

  • PDF

차량 내 네트워크 통신의 기능안전성을 위한 하드웨어 기본 설계 (Basic Design of ECU Hardware for the Functional Safety of In-Vehicle Network Communication)

  • 곽현철;안현식
    • 전기학회논문지
    • /
    • 제66권9호
    • /
    • pp.1373-1378
    • /
    • 2017
  • This paper presents a basic ECU(Electronic Control Unit) hardware development procedure for the functional safety of in-vehicle network systems. We consider complete hardware redundancy as a safety mechanism for in-vehicle communication network under the assumption of the wired network failure such as disconnection of a CAN bus. An ESC (Electronic Stability Control) system is selected as an item and the required ASIL(Automotive Safety Integrity Level) for this item is assigned by performing the HARA(Hazard Analysis and Risk Assessment). The basic hardware architecture of the ESC system is designed with a microcontroller, passive components, and communication transceivers. The required ASIL for ESC system is shown to be satisfied with the designed safety mechanism by calculation of hardware architecture metrics such as the SPFM(Single Point Fault Metric) and the LFM(Latent Fault Metric).

LPG 엔진의 공회전 영역에서 공연비 제어 특성 (Air-Fuel Ratio Control Characteristics of an LPG Engine at Idle)

  • 심한섭
    • 한국생산제조학회지
    • /
    • 제8권5호
    • /
    • pp.30-35
    • /
    • 1999
  • Since LPG has a higher octane number and a lower maximum combustion temperature than gasoline it is getting more popular for reducing emissions from the vehicle This paper when an LPG engine works in the range of idle analyzed the operating range preciously an provides reducing method of emissions for the LPG engine. An electronic control unit(ECU) for the LPG engine using a feedback mixer is presented. The ECU is built by using a microcontroller MC68HC05. A PI-controller is imple-mented in the ECU in order to handle to handle Air/Fuel ration control. The experimental results exhibit that the required engine performance are satisfied at idle.

  • PDF