• The Journal of Korea Robotics Society
• /
• v.11 no.3
• /
• pp.172-182
• /
• 2016

Lane-level vehicle positioning is an important task for enhancing the accuracy of in-vehicle navigation systems and the safety of autonomous vehicles. GPS (Global Positioning System) and DGPS (Differential GPS) are generally used in navigation service systems, which however only provide an accuracy level up to 2~3 m. In this paper, we propose a 3D vision based lane-level positioning technique which can provides accurate vehicle position. The proposed method determines the current driving lane of a vehicle by tracking the 3D position of traffic signs which stand at the side of the road. Using a stereo camera, the 3D tracking paths of traffic signs are computed and their projections to the 2D road plane are used to determine the distance from the vehicle to the signs. Several experiments are performed to analyze the feasibility of the proposed method in many real roads. According to the experimental results, the proposed method can achieve 90.9% accuracy in lane-level positioning.

• Journal of Korean Society of Transportation
• /
• v.19 no.6
• /
• pp.161-170
• /
• 2001

Vehicle detection is the basic of traffic monitoring. Video based systems have several apparent advantages compared with other kinds of systems. However, In video based systems, shadows make troubles for vehicle detection. especially active shadows resulted from moving vehicles. In this paper a new method that combines background subtraction and edge detection is proposed for vehicle detection and shadow rejection. The method is effective and the correct rate of vehicle detection is higher than 98(%) in experiments, during which the passive shadows resulted from roadside buildings grew considerably. Based on the proposed vehicle detection method, vehicle tracking, counting, classification and speed estimation are achieved so that traffic information concerning traffic flow is obtained to describe the load of each lane.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.1
• /
• pp.45-54
• /
• 2023

In the commercialization stage of level 4 or higher autonomous driving, the need for new legal system related to drive safely has increased in order to meet the improved level of technological development. Especially human drivers should not be legally accountable for road safety in the era of autonomous vehicles and thus safety standards for operation of autonomous vehicles are significant. To address this issue, the German Road Traffic Act was revised in 2021, adding provisions corresponding to the commercialization of self-driving vehicle of level 4 and in the similar context the Japanese Road Traffic Ac was amended in 2022. This Article draws implications for legislative discussions on driving-related responsibilities of driverless autonomous vehicle to ensure driving safety in Korea through recent amendments in Germany and Japan.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.12
• /
• pp.1293-1303
• /
• 2006

This paper represents a comparison the difference between existence and nonexistence of soundproof trees for road traffic noise. Also we suggested that the simple equation has been derived using a single regression analysis for predicting levels of $Leq_{th}$ at a given distance from a road in terms of the flow rate, the mean speed of the traffic, and the percentage of the type vehicles in the existence and nonexistence of soundproof trees. We classified a vehicle into four and analyzed contribution rate to traffic volume. As a result, the order showed as followed: light vehicle>medium vehicle>heavy vehicle>motorcycle. However, the results of analyzing contribution rate with between traffic volume and traffic noise by the each type showed as followed; Motorcycle>Light vehicle>Medium vehicle>Heavy vehicle. This study showed that the most a lof of traffic volumes of the three vehicles(light vehicle, medium vehicle and motorcycle) and heavy vehicle were existed in 67 km/h and 61 km/h of car speed, respectively. The total traffic noise to the mean car speed decreased because of the inflow a lot of traffic volumes between 2016 and 2388 in the range of 67 km/h of light vehicle speed, in traffic composition of 4.75% heavy vehicles, and 1.11% motorcycle. the final result for this study showed that statistical paired t-test for between existence and nonexistence of soundproof trees was significant(p<0.05) and the difference between daytime and night in the location of the nonexistence of plant communities with the independent sample T-test was significant(p<0.05). However, the independent sample T-test for analyzing the variance of traffic noise between daytime and night was not significant(p>0.05).

• Journal of Information Processing Systems
• /
• v.12 no.2
• /
• pp.183-195
• /
• 2016

This paper presents a complete method for vehicle detection and tracking in a fixed setting based on computer vision. Vehicle detection is performed based on Scale Invariant Feature Transform (SIFT) feature matching. With SIFT feature detection and matching, the geometrical relations between the two images is estimated. Then, the previous image is aligned with the current image so that moving vehicles can be detected by analyzing the difference image of the two aligned images. Vehicle tracking is also performed based on SIFT feature matching. For the decreasing of time consumption and maintaining higher tracking accuracy, the detected candidate vehicle in the current image is matched with the vehicle sample in the tracking sample set, which contains all of the detected vehicles in previous images. Most remarkably, the management of vehicle entries and exits is realized based on SIFT feature matching with an efficient update mechanism of the tracking sample set. This entire method is proposed for highway traffic environment where there are no non-automotive vehicles or pedestrians, as these would interfere with the results.

• Journal of the Korean Society of Safety
• /
• v.27 no.4
• /
• pp.121-127
• /
• 2012

Vehicle Inspection System is to examine the condition of vehicle regularly at the national level to protect lives and properties of the people from traffic accidents due to vehicle's fault. However, the vehicle inspection method, criteria, period and effectiveness have become a controversial issue, because of examining safety management of vehicle by drivers regardless of regular vehicle inspection. Therefore, the aim of this study is to investigate vehicle inspection timeliness and risk level of inspection items through basic statistical survey and portfolio analysis. The results of the research through practical analysis are: (1) The inspection failure rates between 3 and 6 model year tend to increase. (2) The failure of inspection items for safety highly impacts on traffic accident rate in terms of accident risks. (3) According to the result of portfolio analysis, faulty items located 1st quadrant are riding device, driveline system, controlling device, steering actuator, and fuel system.

• Journal of the Optical Society of Korea
• /
• v.20 no.1
• /
• pp.107-117
• /
• 2016

We develop a new method to globally calibrate the feature points that are derived from the binocular systems at different positions. A three-DOF (degree of freedom) global calibration system is established to move and rotate the 3D calibration board to an arbitrary position. A three-DOF global calibration model is constructed for the binocular systems at different positions. The three-DOF calibration model unifies the 3D coordinates of the feature points from different binocular systems into a unique world coordinate system that is determined by the initial position of the calibration board. Experiments are conducted on the binocular systems at the coaxial and diagonal positions. The experimental root-mean-square errors between the true and reconstructed 3D coordinates of the feature points are 0.573 mm, 0.520 mm and 0.528 mm at the coaxial positions. The experimental root-mean-square errors between the true and reconstructed 3D coordinates of the feature points are 0.495 mm, 0.556 mm and 0.627 mm at the diagonal positions. This method provides a global and accurate calibration to unity the measurement points of different binocular vision systems into the same world coordinate system.

• Journal of Korean Society of Transportation
• /
• v.14 no.4
• /
• pp.49-76
• /
• 1996

Until recently, the inductive loop detecters(ILD) have been used to collect a traffic information in a part of traffic manangment and control. The ILD is able to collect a various traffic data such as a occupancy time and non-occupancy time, traffic volume, etc. The occupancy time of these is very important information for traffic control algorithms, which is required a high accuracy. This accuracy may be improved by classifying a vehicle type with ILD. To classify a vehicle type based on a Analog Digital Converted data collect form ILD, this study used a typical and modifyed statistic method and General Learning Vector Quantization unsuperviser neural network model and a hybrid model of GLVQ and statistic method, As a result, the hybrid model of GLVQ neural network model is superior to the other methods.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2956-2958
• /
• 2000

This paper describes the design of a real time traffic data acquisition system using loop detector and piezzo sensor. Loop detector is the cheapest method to measure the speed and piezzo is used to detect the vehicle axle information. A ISA slot based I/O board is designed for data acquisition and PC process the raw traffic data and transfer the data to the host system. Simulation kit is designed with toy car kits. simulated loop detector and piezzo sensor. The data acquisition system collects up to 10 lane highway traffic data such as vehicle count. speed. length axle count. distance between the axles. The data is processed to generate traffic count, vehicle classification, which are to be used for ITS. The system architecture and simulation data is included and the system will be tested for field operation.

• Journal of Information Processing Systems
• /
• v.15 no.5
• /
• pp.1218-1230
• /
• 2019

This study proposes a novel video traffic flow detection method based on machine vision technology. The three-frame difference method, which is one kind of a motion evaluation method, is used to establish initial background image, and then a statistical scoring strategy is chosen to update background image in real time. Finally, the background difference method is used for detecting the moving objects. Meanwhile, a simple but effective shadow elimination method is introduced to improve the accuracy of the detection for moving objects. Furthermore, the study also proposes a vehicle matching and tracking strategy by combining characteristics, such as vehicle's location information, color information and fractal dimension information. Experimental results show that this detection method could quickly and effectively detect various traffic flow parameters, laying a solid foundation for enhancing the degree of automation for traffic management.