• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.4
• /
• pp.1777-1783
• /
• 2012

In this paper, a new motor driving circuit is designed to improve the output performance of DC motor, and a controller is developed with the designed circuit. By the designed driving circuit, a controller can continuously drive DC motors by a transformer which has switching signals of a self-generated circuit to operate it. And while the DC motor have a maximum velocity, the reference voltage can be maintained higher value than that of triangle voltage and it makes the DC motor driving transistor ON and maximum power. A 24V-500W DC motor controller is developed with the proposed motor driving circuit, and also a small electric car is made and the driving test of it is executed. The test results shows that it can continuously control go and back speed of motor with 12A driving current. And also, it is verified that the over current and heat detecting function is operating correctly and the rest value of the used battery can be displayed as 6 step from 20 to 100%.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.4
• /
• pp.39-45
• /
• 2008

Breakaway support for small signs of size $0.293\;m^2{\sim}0.360\;m^2$ using indented tube type bolt of D12 mm with 6 mm inner diameter has been developed and the structural strength of the support system for the wind load was verified through static shear and tension tests. One important value in understanding the dynamic behavior of sign post and impact vehicle is the fracture energy of the sign support. In this study, fracture energy needed to break the sign support was estimated by pendulum test and computer simulation using LS-DYNA program. Support system composed of 3 indented bolts was found to sustain the 43.1 kg$\sim$51.2 kg wind load safely. Fracture energy for one indented bolt was measured as 163.3J from the pendulum test, and was calculated as 153J from the LS-DYNA simulation. The closeness between these two values verified the validity of the simulation model.

• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.9-17
• /
• 2011

It is possible to set up the Roadside Barrier which is suitable for Performance Evaluation Criteria by domestic standard. But a number of section of expressway roadside have old guardrail that was installed before reform the guideline. These poor performance guardrails threaten driver's life. There is lots of difficult problem to change old guardrails that are installed 2,777km in expressway of whole road side at the same time. Especially budget problem. The purpose of study is to develop performance improvement guardrails by the minimum reinforcement. In this study, guardrail improvement method(SB1, 3, 5 grade) is developed through crash simulation using LS-DYNA 3D and vehicle crash test. And it's expected not only to decrease of collision accident but to increase safe level. Of course one thing that can't be missing is to reduce a lot of budget of guardrail change.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.2
• /
• pp.85-101
• /
• 2015

Objective: The purpose of this study was to develop and evaluate smart secondary controls using iPad for the drivers with physical disabilities in the driving simulator. Background: The physically disabled drivers face problems in the operation of secondary control devices that accept a control input from a driver for the purpose of operating the subsystems of a motor vehicle. Many of conventional secondary controls consist of small knobs or switches that physically disabled drivers have difficulties in grasping, pulling or twisting. Therefore, their use while driving might increase distraction and workload because of longer operation time. Method: We examined the operation time of conventional and smart secondary controls, such as hazard warning, turn signal, window, windshield wiper, headlights, automatic transmission and horn. The hardware of smart secondary control system was composed of iPad, wireless router, digital input/output module and relay switch. We used the STISim Drive3 software for driving test, customized Labview and Xcode programs for interface control of smart secondary system. Nine subjects were involved in the study for measuring operation time of secondary controls. Results: When the driver was in the stationary condition, the average operation time of smart secondary devices decreased 32.5% in the normal subjects (p <0.01), 47.4% in the subjects with left hemiplegic disabilities (p <0.01) and 38.8% in the subjects with right hemiplegic disabilities (p <0.01) compared with conventional secondary devices. When the driver was driving for the test in the simulator, the average operation time of smart secondary devices decreased 36.1% in the normal subjects (p <0.01), 41.7% in the subjects with left hemiplegic disabilities (p <0.01) and 34.1% in the subjects with right hemiplegic disabilities (p <0.01) compared with conventional secondary devices. Conclusion: The smart secondary devices using iPad for people with hemiplegic disabilities showed significant reduction of operation time compared with conventional secondary controls. Application: This study can be used to design secondary controls for adaptive vehicles and to improve the quality of life of the people with disabilities.

• Journal of Environmental Science International
• /
• v.20 no.9
• /
• pp.1205-1212
• /
• 2011

As serving people's activities, pedestrian road systems are basic and necessary facilities in urban structure. To provide and utilize these pedestrian road systems in residential area would enhance urban environment as well as quality of life. For this reason, pedestrian road should be planned by consideration of people's activity in residential area. Evaluation of existing pedestrian road should be also oriented how people use it and what people do in it. This study amis to investigate functions of pedestrian road system throughout evaluation of user's satisfaction in order to improve better pedestrian road system in residential area. The purposes of this study are to analyze components of factors affecting on user's satisfaction, and to find the relationship among affecting factors. For this study, the on-site questionnaire method was applied to 267 individuals who were collected as the study areas where locate Toyogaoka and Kaidori, Japan. The collected data were clarified exploratory factors, and analyzed relationship between the factors and satisfaction by applying quantitative statistical techniques for the mapping investigation, Mann-Whitney u-test, and correlation. The results of this study are follows. The pedestrian road system is more preferred than surroundings of vehicle roads in residential district area where maintains pedestrian road as open space. In addition, satisfactions of the pedestrian road for each purpose were highly evaluated, because of conformability and convenience for usage. Consequently, the pedestrian road which is secure and greening as an open space is well carried out for the living circulation of residents. It would suggest that pedestrian road have to be managed and planned not a function of circulation but an open space system.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.1
• /
• pp.85-96
• /
• 2011

The access monitoring and control system of vehicles involved in construction logistics has been evolved from paper-based through bar code-based and to RFID-based management with pursuing automatic data collection and management. However, existing management methods have a limit that they still need manpower allocation for access control of vehicles. Therefore this research has proposed an framework that includes devices and an information system for effective and efficient data collection for access control of vehicles for construction logistics. And the proposed framework has been verified through a laboratory test using a prototype system developed in this research. It is expected that the installation methods of RFID antenna and tag for the framework could be applied to not only the access control of construction site but also various RFID applications at construction sites.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.6
• /
• pp.634-639
• /
• 2012

The contribution levels of emissions from the heavy-duty vehicles have been continuously increased. Among the exhaust emissions, NOx (nitric oxides) have a ratio of 73.2% and particle matters have a proportion of 61.8% in the heavy-duty vehicles. Also, natural gas vehicles have the 78.9% of total registered local buses in Korea. Therefore, the investigation on emission characteristics of heavy-duty vehicles using CNG and diesel fuel according to the various driving cycles was carried out in this study. In order to analyze the emission characteristics, the five kinds of buses by using CNG and diesel fuels with a after-treatment devices (DPF, p-DPF) was used and five test driving schedules were applied for analysis of emission characteristics in a chassis dynamometer. To analyze the exhaust emission, the exhaust emission and PM analyzers were used. From this study, it is revealed that diesel buses with after-treatment had reduced emission of CO, HC, PM but NOx. Also, NMHC emission of CNG bus have a higher level and NOx level was similar with diesel buses. In addition, emissions in NIER06 with slow average speed shows lowest levels compared to other test modes.

• Advances in Traditional Medicine
• /
• v.7 no.1
• /
• pp.41-45
• /
• 2007

The roots of the plant Korean ginseng have been extensively used in the traditional Chinese herbal medicine. The effects of chronic administration of Korean ginseng extract (KGE) were investigated on two different anxiety models: the elevated T-maze (for inhibitory avoidance and escape measurements) and the open field test (OFT). Diazepam (1 mg/kg), KGE (10, 30 and 100 mg/kg) were administered orally for 15 days. On the 14th day, mice were previously exposed for 30 min to one of the open arms of the T-maze, 24 h before the test. On 15th day, mice had two exposures to the enclosed and open arm of the elevated T-maze followed by exposure to the open field apparatus. The number of line crossings in the apparatus was used to assess locomotor changes. Cumulative Concentration Response Curve of 5-HT was plotted using rat fundus which were pre-treated in a similar way. Treatment with Diazepam (1 mg/kg) and KGE (10, 30 and 100 mg/kg) significantly (P < 0.05) impaired inhibitory avoidance performance but did not impair escape latency. In OFT, diazepam facilitated locomotion as compared to vehicle and other treatment groups. KGE at any of the selected doses did not impair locomotion. Concentration response curve of 5-HT was shifted towards the right with suppression of maxima in rats treated with KGE. The results suggest that KGE exerts anxiolytic like behaviour in a specific subset of defensive behaviour, particularly those related to generalized anxiety disorder.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.7
• /
• pp.531-538
• /
• 2017

A flush air data sensing system, which can predict flight speed, angle of attack, and angle of sideslip of the aircraft is designed and manufactured for a small UAV. Two kinds of flush pressure ports, four ports and five ports, are tapped at the same section of fuselage nose-cone. Calibration pressure data at flush ports are obtained through computations for the total aircraft by using Fluent code. Angle of attack, angle of sideslip, total pressure, and static pressure are represented with 4th-order polynomial function and calibration coefficient matrix is obtained using least square method with calibration pressure data. Flight test showed that flight speed, angle of attack, and sideslip angle predicted by four flush ports and five flush ports compared well with those by five-hole probe installed for data comparison. Especially four flush ports revealed nearly same results as those by five flush ports.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.5
• /
• pp.558-563
• /
• 2008

Vibration/shock affects biggest taking a train subtraction of vehicle and durability decline. Therefore, absorber is used for vibration/shock isolation and various qualities of the material and design are applied to isolation. This paper proposes vibration/shock absorber that applies 'Disc' spring. Through comparison with 'Disc' spring that has nonlinearity and coil spring that is having linearity, see effect that nonlinearity of isolation gets in vibration/shock Isolation. Coil spring and 'Disc' spring are non-linear numerical analysis and simulation through theory for this, get and investigate comparison result through an experiment finally. Expressed and formulated shock through 'Runge-Kutta' method/impact response to nonlinear-vibration-equation of 1 degree of freedom for numerical analysis. Double half sine pulse of excitation used and analyzed result through spectrum response analysis here. Response of disc spring is compared to response of coil spring by changing $h_o/t$ ratio with computer simulation and the usage of disc spring is increased through analysis of effect of design factors. The purpose of this paper is that the shock response of disc spring is calculated through numerical simulation and to design the optimal absorber under the limited condition. And then, the isolation effect was analyzed through the shock test.