• International Journal of Internet, Broadcasting and Communication
• /
• 제14권2호
• /
• pp.119-128
• /
• 2022

Recently, due to the development of related technologies for autonomous vehicles, driving work is changing more safely. However, the development of support technologies for level 5 full autonomous driving is still insufficient. That is, even in the case of an autonomous vehicle, the driver needs to drive through forward attention while driving. In this paper, we propose a method to monitor driving tasks by recognizing driver behavior. The proposed method uses pre-trained deep convolutional neural network models to recognize whether the driver's face or body has unnecessary movement. The use of pre-trained Deep Convolitional Neural Network (DCNN) models enables high accuracy in relatively short time, and has the advantage of overcoming limitations in collecting a small number of driver behavior learning data. The proposed method can be applied to an intelligent vehicle safety driving support system, such as driver drowsy driving detection and abnormal driving detection.

• 한국재난정보학회:학술대회논문집
• /
• 한국재난정보학회 2023년 정기학술대회 논문집
• /
• pp.83-84
• /
• 2023

4족 보행 로봇을 투입하기 위해서는 로봇을 운반할 수 있는 차량이 필요하며 특히 본 연구에서는 군용 작전 지휘 차량을 벤치 마킹하여 화재 진압용 TCMV(Tactical Command Monitoring Vehicle)를 개발하고자 하였다. TCMV를 통해 4족보행 로봇이 화재 현장에 진압할 수 있도록 시나리오를 개발하고 있으며, 아울러 TCMV의 요구사양을 정의 하기 위하여 소방관을 중심으로 의견을 수렴하여 화재 진압의 전략을 개발하고 있다. 추후 TCMV에 적합한 차량과 각종 모니터링 시스템을 구축해 4족 보행 로봇의 화재 진압 기능과 구조 기능을 극대화 하며 새로운 화재 진압 전술이 될 것으로 기대된다.

• 자동차안전학회지
• /
• 제15권4호
• /
• pp.58-64
• /
• 2023

The adoption of hydrogen-powered Elec is expanding globally. Hydrogen is recognized as a potentially hazardous energy source, and safety assessment is crucial for the development of plans to supply hydrogen-powered electric buses. Hydrogen gas leakage can have a significant impact during bus operations, and continuous hydrogen leakage in hydrogen-powered vehicles can result in fatal accidents. In this study, information about hydrogen leakage is collected through sensors installed within the vehicles and is measured when the sensor detects a leak. The study also proposes the use of Pseudo Fuel Leakage (PFL, %) as an additional indicator for evaluating and monitoring hydrogen safety and leakage.

• 한국인터넷방송통신학회논문지
• /
• 제19권3호
• /
• pp.105-114
• /
• 2019

4차 산업혁명의 발전에 따라 빅데이터의 기술들을 이용하여 연식이 오래된 차량들에서 확인할 수 없는 결과들을 모바일을 이용하여 즉각적으로 확인할 수 있는 시스템을 개발하였다. 먼저 OBD2 센서를 이용하여 차량의 데이터를 수집하였고 수집된 데이터를 라즈베리파이에 저장하여 라즈베리파이가 차량이 주행하는 것과 같은 상황을 두었다. 이후 차량의 데이터가 발생되면 데이터를 실시간으로 수집하고, 수집된 데이터를 여러 개의 노드를 이용해 분산저장한 뒤 시각화 하고자 하는 데이터를 가공, 정제, 처리하고 처리된 결과를 바탕으로 시각화하여 출력한다. 우리는 이와 같은 진행에 빅데이터를 이용하고 차량데이터를 빠르게 처리하여 모바일 기기를 통하여 효과적으로 확인할 수 있다.

• 한국철도학회논문집
• /
• 제3권3호
• /
• pp.147-153
• /
• 2000

The train control and monitoring system (TCMS) is an on board computer system in railway vehicles performing the control, supervisory and diagnostic functions of the complete train system. This system replaces a lot of hard-wired relays and minimizes the necessary vehicle wiring thus increasing the reliability of the train. It is also one of more important equipment on vehicle to implement much higher safety and reliability train system. We studied a software design technique of TCMS using a CASE tool that is a kind of safety critical software engineering tool (SCADE). This tool has mainly four functions such as the graphical editor, the document maker, tile automatically code generator, and the test simulator. The several functions of TCMS are implemented in this software easily programmed using a functional block diagram and a graphic programming language. We applied to automatically generated TCMS modules on the SCADE each functional block for the Standard type EMU in Korea. We performed the combination test using TCMS simulator and the running test in Seoul subway 7 Line. We proved that this technique is more useful for the software design of TCMS in urban transit

• Smart Structures and Systems
• /
• 제13권6호
• /
• pp.1065-1094
• /
• 2014

Civil engineers always face the challenge of uncertainty in planning, building, and maintaining infrastructure. These works rely heavily on a variety of surveying and monitoring techniques. Unmanned aerial vehicles (UAVs) are an effective approach to obtain information from an additional view, and potentially bring significant benefits to civil engineering. This paper gives an overview of the state of UAV developments and their possible applications in civil engineering. The paper begins with an introduction to UAV hardware, software, and control methodologies. It also reviews the latest developments in technologies related to UAVs, such as control theories, navigation methods, and image processing. Finally, the paper concludes with a summary of the potential applications of UAV to seismic risk assessment, transportation, disaster response, construction management, surveying and mapping, and flood monitoring and assessment.

• 한국전자통신학회논문지
• /
• 제19권1호
• /
• pp.233-240
• /
• 2024

본 연구에서는 5G 네트워크용 UAV(: Unmanned Aerial Vehicle)를 사용한 산업단지 내의 현장 상황을 실시간 감시하는 시스템에 대해 소개한다. UAV에 장착된 센서(화재, 유해가스 검출, 산업 재해형 인체 사고 감지)에서 모니터링 이벤트가 발생하면 센서의 주요 정보들이 UAS(: Unmanned Aerial System)애플리케이션 서버로 전달한다. 이러한 정보 전달 처리결과로, 산업단지공단의 관리자나 운영자는 사고 위험 상황별 트리거 처리를 통한 산업단지공단 내의 현장에서 인명사고와 화재, 그리고 유해 가스검출에 대한 법적인 근거 자료를 확보할 수 있게 되었다.

• 대한산업공학회지
• /
• 제36권4호
• /
• pp.230-242
• /
• 2010

In this paper, an environmental monitoring and diagnosis system based on ubiquitous computing technology, shortly u-Eco Monitoring System, is proposed. u-Eco Monitoring System is designed to: 1) Collect information from the manufacturing processes via ubiquitous computing technology, 2) Analyze the current status, 3) Identify the cause of problem if detected by rule-based and case-based reasoning, and 4) Provide the results to the operator for proper decision making. Based on functional modeling, a generic architecture is derived, followed by application to a manufacturing system in iron and steel making industry. Finally, to show the validity of the proposed method, a prototype is developed and tested. The developed methods can be used as a conceptual framework for designing environmental monitoring and diagnosis system for industrial practices by which monitoring accuracy and response time for abnormal status can be significantly enhanced, and relieving operator pressure from manual monitoring and error-prone decision making.

• International Journal of Contents
• /
• 제9권4호
• /
• pp.22-29
• /
• 2013

In this paper, we propose a integrated real-time monitoring system for recycling agriculture resourcing based on USN. We design and implement the monitoring system so that we can integrate the quality control of farmyard and liquid manures, barn environment monitoring, and positioning information control into a total management system performing recycling of excrement and manure. Selection of sensors and sensor-node construction and requirements, structure of wire/wireless communication networks, and design of monitoring program are also presented. As a result of operating our system, we can get over various drawbacks of conventional separated system and promote the proper circulation of excrement up to the farmyard. We confirm that these advanced effects arise from the effective management of the total system integrating quality control of farmyard/liquid manure, barn/farmhouse information, and vehicle moving monitoring information etc. Moreover, this monitoring system is able to exchange real-time information throughout communication networks so that we can construct a convenient information environment for agricultural community by converging IT technology with farm and stockbreeding industries. Finally we present some results of processing using our monitoring system. Sensing data and their graphs are processed in real-time, positioning information on the v-world map offers various moving paths of vehicles, and statistical analysis shows all the procedure from excrement occurrence to recycling and resourcing.

• 한국환경복원기술학회지
• /
• 제22권6호
• /
• pp.63-76
• /
• 2019

UAVs are unmanned, autonomous or remotely piloted aircraft. As UAVs become smaller, lighter and more economical, their applications continue to expand. Researches on UAVs in the field of remote sensing show development methods and purposes similar to those on satellite images, and they are widely used in studies such as 3D image composition and monitoring. In the field of environmental impact assessment(EIA), satellite information and data are mainly used. However, only low-resolution images covering long distances and large-scale data allowing for rough examination are being provided, so their uses are seriously limited. Therefore, in this paper, we construct spatial information of forest area by using unmanned aerial vehicle and seek efficient utilization and policy improvement in the field of environmental impact assessment. As a result, high-resolution images and data from UAVs can be used to identify the location status of SEIA, EIA, and small scale EIA project plans and to evaluate detailed environmental impact analysis. In addition, when provided together with infographics about Post-environmental impact investigation, it was confirmed that the possibility of periodic spatial information construction and evaluation can be used throughout the entire project contents and project post-process.In order to provide sophisticated infographics for the EIA, drone photography and GCP surveying methods were derived.The results of this study will be used as a basis for improving high-resolution monitoring and environmental impact assessment in the forest sector.