• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.705-707
• /
• 2014

The vehicle network such as CAN, MOST, Ethernet has different protocols. In the case of Ethernet data, when data is transmitted from Ethernet to MOST150, it cannot be treated by Ethernet channel of MOST150, leading to data loss and transmission delays. Thus, this thesis proposes vehicle integration GATEWAY, which can form a network by organically connecting the Ethernet and MOST150 networks and minimize the delay and data losses caused by the differences in bandwidth.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.8
• /
• pp.4123-4141
• /
• 2019

Autonomous driving technology is divided into 0~5 levels. Of these, Level 5 is a fully autonomous vehicle that does not require a person to drive at all. The automobile industry has been trying to develop Level 5 to satisfy safety, but commercialization has not yet been achieved. In order to commercialize autonomous unmanned vehicles, there are several problems to be solved for driving safety. To solve one of these, this paper proposes 'A Deep Learning Part-diagnosis Platform(DLPP) based on an In-vehicle On-board gateway for an Autonomous Vehicle' that diagnoses not only the parts of a vehicle and the sensors belonging to the parts, but also the influence upon other parts when a certain fault happens. The DLPP consists of an In-vehicle On-board gateway(IOG) and a Part Self-diagnosis Module(PSM). Though an existing vehicle gateway was used for the translation of messages happening in a vehicle, the IOG not only has the translation function of an existing gateway but also judges whether a fault happened in a sensor or parts by using a Loopback. The payloads which are used to judge a sensor as normal in the IOG is transferred to the PSM for self-diagnosis. The Part Self-diagnosis Module(PSM) diagnoses parts itself by using the payloads transferred from the IOG. Because the PSM is designed based on an LSTM algorithm, it diagnoses a vehicle's fault by considering the correlation between previous diagnosis result and current measured parts data.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.6
• /
• pp.37-45
• /
• 2011

As vehicles become more intelligent, in-vehicle networking (IVN) systems such as controller area network (CAN) or FlexRay are essential for convenience and safety of drivers. To expand the applicability of IVN systems, attention is currently being focused on the communication between heterogeneous networks such as body networking and chassis networking systems. A gateway based on message mapping method was developed to interconnect FlexRay and CAN networks. However, this type of gateways has the following shortcomings. First, when a message ID was changed, the gateway must be reloaded with a new mapping table reflecting the change. Second, if the number of messages to be transferred between two networks increase, software complexity of gateway increases very rapidly. In order to overcome these disadvantages, this paper presents FlexRay-CAN gateway based on node mapping method. More specifically, this paper presents a node mapping based FlexRay-CAN gateway operation algorithm along with the experimental evaluation for ID change.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.2
• /
• pp.53-58
• /
• 2014

As the amount of data between ECUs has increased, the FlexRay consortium proposed FlexRay network system which has larger bandwidth than CAN. But because of implementation cost, CAN and FlexRay hybrid network with FlexRay-CAN gateway will make up the largest part of in-vehicle networks for the present. In this paper, a FlexRay-CAN gateway for a real time feedback control system is implemented, and a data packing algorithm is presented. Finally, a real control experiment with multi-motor system is conducted to verify the proposed gateway system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1959-1968
• /
• 2016

The recent automobiles, a number of ECU inside the vehicle has been used. Also, each ECU is connected to different types of networks in accordance with the characteristics. Therefore, efficient data exchange between discrete network has emerged as a very important element. The gateway is responsible for the ability to exchange data between discrete network. In this study, we propose the new gateway algorithm to provide the structure of the mapping table to improve the efficiency of data exchange between discrete network. Also it provides a structure of a new gateway algorithm with a function of adjusting the priority of the data to be transmitted to another network arbitrarily. Moreover, the proposed gateway structure may simultaneously convert the transmission data input from a particular network to multiple networks. Another advantage is easy to change the entire data structure only if we change the table structure in the gateway.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.753-755
• /
• 2010

As demands increase for the Infotainment System, the Multimedia Networking technology for automobile, called MOST(Media Oriented Systems Transport), has been actively applied to the automobile industry, to meet the demands of the Infotainment System. The MOST25 network technology is being restrictively equipped with some of the car models but the problems withbandwidth and compatibility has arisen. In order to solve this, the MOST150 technology has been developed and further research is being carried out to applythe technology to the automobile industry. Thus, for the effective process of the Ethernet traffic in the realization of MOST150/Ethernet Gateway for automobile, we, in the research, shall analyse the Management Mapping method, including the MOST150's Isochronous channel, the MOST Ethernet Packet Channel, and etc. and study the efficient algorithm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.780-783
• /
• 2009

The application of MOST150 technology has been required to satisfy the demand for the automotive infotainment system and the higher bandwidth requirements caused by the increase of the multimedia processing capacity. The Ethernet technology applied gateway was implemented for an efficient transmission of multimedia, a vehicle diagnosis, an external communication, a data processing between the MOST150 and the CAN communication method applied to many existing vehicles. The new algorithm and application were suggested in order to efficiently perform the data processing between other types of communication systems. The existing MOST150 frame is mainly composed of the Control Channel, the Legacy Packet Channel(async) and the Synchronous /Isochronous Channels and performs the data processing through these sequential channels. With the sense of this process, this study suggested the new algorithm that the Mapping method of the IETF's QoS Management was applied to the MOST150 technology for the efficient QoS.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.4
• /
• pp.326-333
• /
• 2001

This paper focuses on a method to connect mobile devices such as mobile robot. Automated Guided Vehicle (AGV) and Unmanned Container Transporter(UCT) to a fieldbus. In this paper, the IEEE 802.11 wireless LAN is used to extend a Profibus network for the mobile devices. In order to integrate these two networks, a gateway is developed using two threads and an internal buffer. Furthermore, a polling algorithm is applied at the gateway in order to satisfy real-time requirements on data communication, Finally, the performance measures such as data latency and throughput are experimentally evaluated on a wirelessly-extended Profibus network. The results shows the feasibility of the wireless extension of Profilbus for various mobile device.

• Journal of Korea Multimedia Society
• /
• v.8 no.11
• /
• pp.1496-1509
• /
• 2005

In this paper, an adaptive license plate recognition system which detects and recognizes license plate at real-time by using projected plane convolution and Decision Tree Classifier is proposed. And it was tested in circumstances which presence of complex background. Generally, in expressway tollgate or gateway of parking lots, it is very difficult to detect and segment license plate because of size, entry angle and noisy problem of vehicles due to CCD camera and road environment. In the proposed algorithm, we suggested to extract license plate candidate region after going through image acquisition process with inputted real-time image, and then to compensate license size as well as gradient of vehicle with change of vehicle entry position. The proposed algorithm can exactly detect license plate using accumulated edge, projected convolution and chain code labeling method. And it also segments letter of license plate using adaptive binary method. And then, it recognizes license plate letter by applying hybrid pattern vector method. Experimental results show that the proposed algorithm can recognize the front and rear direction license plate at real-time in the presence of complex background environments. Accordingly license plate detection rate displayed $98.8\%$ and $96.5\%$ successive rate respectively. And also, from the segmented letters, it shows $97.3\%$ and $96\%$ successive recognition rate respectively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.57-62
• /
• 2017

Recently, the use of electronic control units in vehicle has increased. The ECUs are connected to in vehicle networks to process a large amount of information. In this paper, for an actuator that is interconnected to CAN and FlexRay, a FlexRay-CAN gateway is presented and a data packing algorithm with a bisection method of a FlexRay slot is proposed. And, a network based actuator control system and packing map is implemented. With the proposed packing method, contact force sensor data are transferred within the maximum allowed delay to ensure the stability. The proposed method is useful for control of distributed system.