• Journal of Advanced Navigation Technology
• /
• v.21 no.3
• /
• pp.300-305
• /
• 2017

It is necessary to establish a system suitable for the driving vehicle so that it can effectively search for and modify various data anywhere and anytime by effectively linking communication with the computer system in the running vehicle and to control the equipment properly for smooth operation on a limited platform do. Also, vehicle CAN communication is used to extract system engine information, and data is transmitted using ZigBee for this information transmission. Therefore, OBD-II protocol, which is provided by the vehicle itself, is used for vehicle CAN to obtain vehicle status information and exhaust gas using various sensor information of the vehicle and O2 sensor value, and transmits it to the ZigBee main control system. In this study, we implemented a system that can reduce the battery load damage to the maximum by reducing the power consumption to the maximum, and to monitor the internal state of the vehicle through ZigBee communication with the embedded system for low power vehicles.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.587-590
• /
• 2017

전원 무결성은 PCB의 구조적 공진이 노이즈와 직접적으로 관련이 되어있고, 구조 해석을 위하여 전자장 해석법을 이용하게 된다. 전원 무결성 과정은 PCB의 공진해석을 통해 공진 발생 위치 및 주요 선로의 임피던스 분석을 하고 Decoupling 캐패시터와 레이아웃 수정을 통해 목표한 임피던스 값보다 낮아지도록 수정과 해석을 반복하는 작업이다. 제안된 방법을 통하여 PCB 제작 이전에 전자파 성능을 예측하고 개선하여 설계비용을 절감하고 신뢰성을 향상 시킬 수 있을 것으로 판단된다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.274-284
• /
• 2019

The control architectures of Chuan Suo (CS) deep submergence rescue vehicle are introduced. The hardware and software architectures are also discussed. The hardware part adopts a distributed control system composed of surface and underwater nodes. A computer is used as a surface control machine. Underwater equipment is based on a multi-board-embedded industrial computer with PC104 BUS, which contains IO, A/D, D/A, eight-channel serial, and power boards. The hardware and software parts complete data transmission through optical fibers. The software part involves an IPC of embedded Vxworks real-time operating system, upon which the operation of I/O, A/D, and D/A boards and serial ports is based on; this setup improves the real-time manipulation. The information flow is controlled by the software part, and the thrust distribution is introduced. A submergence vehicle heeling control method based on ballast water tank regulation is introduced to meet the special heeling requirements of the submergence rescue vehicle during docking. Finally, the feasibility and reliability of the entire system are verified by a pool test.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.3 no.3
• /
• pp.126-135
• /
• 2008

The development of an unmanned vehicle basically requires the robust and reliable performance of major functions which include global localization, lane detection, obstacle avoidance, path planning, etc. The implementation of major functional subsystems are possible by integrating and fusing data acquired from various sensory systems such as GPS, vision, ultrasonic sensor, encoder, and electric compass. This paper focuses on implementing the functional subsystems, which are designed and developed by a graphical programming tool, NI LabVIEW, and also verifying the autonomous navigation and remote control of the unmanned vehicle.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.3
• /
• pp.149-156
• /
• 2011

Transmission delay and packet loss induced by a communication network can degrade the control performance and, even make the system unstable. This paper presents a method for compensating transmission delay and packet loss in a networked control system for unmanned underwater vehicle. The proposed method is based on Lagrange interpolation in order to satisfy the requirements of simplicity and model-independency. In this work, the lost/delayed data are estimated in real time by only using the past data without requiring any mathematical model of the controlled system. Consequently, the proposed method can be implemented independent of the controlled system, and also it can achieve fast and accurate compensation performance. The performance of the proposed technique is evaluated by numerical simulations with an unmanned underwater vehicle.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.10
• /
• pp.1962-1967
• /
• 2009

This paper deals with a design of a platform to simulate PRT vehicle operational control algorithms using on-board embedded process board. The configuration of the platform is composed of the central control module, the station control module, man-machine interface and monitoring module. Since PRT system needs inherently very reliable vehicle operational control algorithm in order to avoid the impact between vehicles, it is very important to construct a simulation platform to test a designed vehicle operational control algorithm during the development process For the test of the proposed platform a path of the each moving vehicle is predefined in the central control system before the dispatch order is given to the vehicle. The simulation results show the effectiveness of the proposed simulation platform for test and evaluation of the PRT operational control algorithms.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.9
• /
• pp.1-8
• /
• 2023

This paper presents the control strategy of Auto-leveling equipment (ALE) of Multi-function radar (MFR) for vehicle using Embedded System. MFR implements surveillance patrol missions such as surface-to-air missiles and fighters with constant rotation. ALE consists of 4 Auto-leveling modules (ALM) and retains the stability with maintaining level. The gradient of vehicle can be measured and controlled by embedded systems. This paper contributes for improvement the system design with the ALM 1 set modeling. The validity of the modeling is verified using MATLAB/Simulink.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.3
• /
• pp.645-650
• /
• 2010

In this paper we present the Bimodal-tram simulator using the PXI embedded real-time controllers. The Bimodal-tram is developed in KRRI (Korea Railroad Research Institute). The vehicle can be automatically operated by navigation control system (NCS). For the automatic driving, the vehicle lanes will be marked with permanent magnets that are placed in the ground. The vehicle is controlled by NCS. NCS governs the manual mode and automatic mode driving. The simulator is designed by an identical conception with the real control condition. The dynamic motion of vehicle is simulated by the nonlinear dynamic model. The control computer calculates the control values. The signal interface is linked by CAN communication. The simulation is processed by real-time base. The test driver can see the graphic motion of vehicle and can operate the steering wheel, gas and brake pedal to control direction and velocity of vehicle during the simulation. At present, the simulator is only operated by manual mode. The automatic mode will be linked after the control algorithm is finished. We will use the simulator to develop the control algorithm in the automatic mode. This paper shows the simulator designed for Bimodal-tram using real-time based controller. The results of the test using the simulator are presented and discussed.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.3 no.1
• /
• pp.42-48
• /
• 2008

The architecture of WSN based Vehicle Speed Measurement System is presented in this paper from Telematics Sensor Network(TSN) to Management System. To verify the feasibility of the system, we implemented the vehicle speed measurement system and evaluated the accuracy of velocity measured by the system in our testbed, an old highway located near Kyungbu highway. The system performed over 95% of accuracy at 80kmph from the measurement. In addition, the battery life time of the sensor node was evaluated by simulation analysis with real measured current consumption profiles. Assuming the maximum average daily traffic in 2005, the battery life time is expected to be over 1.6 year from the simulation result.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.85-90
• /
• 2005

The advance of mobile and telematics technologies has produced vehicles with various convenient services for drivers. Specifically lots of researches and several technologies have been developed to provide services of a remote vehicle diagnosis and control. The existing and representative product for a vehicle control is a RCS (remote control system), but it has a problem of short control distance and fragile security. In this paper, a telematics terminal embedded with CDMA and GPS is designed, which can be connected to the Internet. It allows a driver with a cellular phone to remotely diagnosis and control a vehicle via wireless network and SMS.