• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.16 no.28
• /
• pp.195-202
• /
• 1993

This paper considers the vehicle routing problem taking account of not only delivery but pick-up at the same time. A mathematical formulation is presented for finding the route which satisfies all the demands of customers and enables picking up most containers without exceeding the capacity of the vehicle. A table comparing traveling distance and the pick-up amount is provided by using heuristic method, which will be of help to the decision makers.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2D
• /
• pp.251-258
• /
• 2006

This study is to develop an estimation method of freeway design capacity through the analysis of time headway distribution in continuum flow. Traffic flow-speed diagram and time headway distribution plotted from individual vehicle data shows: a) a road capacity is not deterministic but stochastic, b) time headway distribution for each vehicle speed group follows pearson type V distribution. The freeway design capacity estimation model is developed by determining a minimum time headway for capacity with stochastic method. The estimated capacity values for each design speed are lower when design speed ${\leq}80km/h$, and higher when design speed ${\geq}106km/h$ in comparison with HCM(2000)'s values. In addition, The distinguish difference is that this model leads flexible application in planning level by defining the capacity as stochastic distribution. In detail, this model could prevent a disutility to add a lane for only one excess demand in a road planning level.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.2
• /
• pp.48-61
• /
• 2020

The objective of this study is to estimate traffic capacity based on the heavy-vehicle ratio in a two-lane freeway work zone where one lane is blocked by construction. For this, closed circuit television (CCTV) video data of the freeway work zone was collected, and the congestion at an upstream point was observed. The traffic volume at a downstream point was analyzed after a bottleneck was created by the blockage due to the upstream congestion. A distribution model was estimated using observed-time headway, and the road capacity was analyzed using a goodness-of-fit test. Through this process, the general capacity and an equation for capacity based on the heavy-vehicle ratio passing through the work zone were presented. Capacity was estimated to be 1,181~1,422 passenger cars per hour per lane (pcphpl) at Yeongdong, and 1,475~1,589pcphpl at Jungbu Naeryuk. As the ratio of heavy vehicles increased, capacity gradually decreased. These findings can contribute to the proper capacity estimation and efficient traffic operation and management for two-lane freeway work zones that block one lane due to a work zone.

• Journal of the Korean Society of Safety
• /
• v.30 no.4
• /
• pp.32-38
• /
• 2015

In this paper, we analyzed the vehicle fire accidents due to damage of vehicle's electrical components, which is applied to a vehicle. In recent development of electrical components technology, approximately 40% of vehicle manufacturing parts have applied electronic circuit technology. Phenomenon such deterioration of insulating performance or electric breakdown on the vehicle's electrical components and printed circuit boards(PCBs) resulted from moisture, contamination and aging due to repetitive operations, lead to the vehicle fire. Therefore, the application of electrical components with adequate electric capacity for vehicle and usage of molding techniques using a non-combustible materials to shut off the oxygen should be applied in order to prevent vehicle fire due to damage of the electrical components and PCBs.

• Journal of Auto-vehicle Safety Association
• /
• v.7 no.4
• /
• pp.16-19
• /
• 2015

FMVSS226 Ejection Mitigation Impact Test is usually performed by real vehicle. But it is necessary to perform the test using by Reinforced B.I.W. with considering vehicle developing timing and roof rail airbag (RRAB) supplier capacity. We sometimes need tendency (quick data) instead of slow accurate data to fix RRAB design as proper timing. Test with Reinforced B.I.W. is helpful saving time and cost. But it should be confirmed how much different between vehicle conditioned test result and Reinforced B.I.W. conditioned test result. There are some points to be improved even in the test with vehicle. Understanding of deviation of Reinforced B.I.W. conditioned test result from vehicle conditioned test result is needed to get benefits with using Reinforced B.I.W. conditioned in the test.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.6
• /
• pp.1085-1091
• /
• 2002

General vehicle is evaluated by its acceleration, fuel economy, NVH (Noise, Vibration and Harshness) and subjective (such as launching feel) performance. The first step to enhance its performance is to know how much each component affects on the vehicle performance. It is very important to know what is the key factor of the component among many specifications. Hydraulic torque converter can be expressed by means of its performance curve (torque ratio and capacity factor). In this paper, the key factor of torque converter, which affect vehicle performance, are explored by using Taguchi method. Moreover, general sensitivity analysis method is compared with Taguchi's experiment.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.342-352
• /
• 2003

Idle NVH characteristics are one of the most important aspects among the vehicle performances. Vehicle developers are devoted to improve vehicle interior noise and steering wheel and seat vibrations. In order to improve the idle quality, noise and vibration transfer path should be carefully evaluated. Also, effects of various components related to the idle performance should be confirmed. A general procedure for improving the idle qualify is described in detail. The relationship among cylinder pressure characteristics, crankshaft rotational speed variation, and vehicle vibrations is also investigated. Influences of drive shaft, torque converter, air conditioning system, vehicle structure including engine mount system, and idle control parameters on the vehicle idle quality are studied. Weak points of typical vehicles on the idle qualify are identified. Some of improvement measures are proposed and verified.

• Journal of electromagnetic engineering and science
• /
• v.11 no.3
• /
• pp.174-182
• /
• 2011

The On-line Electric Vehicle (OLEV) is an electric transport system in which the vehicle's power is transferred wirelessly from power lines underneath the surface of the road. Advantages of the OLEV include reducing battery size and cost to about 20 percent of that of conventional battery-powered electric vehicles, thereby minimizing the vehicle's weight and price, as well as the cost of charging the system. In this paper, we introduce a wireless power transfer mechanism to maximize the electrical performance of the power transfer system. Power transfer capacity, power transfer efficiency, and magnitude of leakage in the electromagnetic field (EMF) are analyzed, and the optimization methodology of the design parameters is discussed.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.28 no.1
• /
• pp.55-63
• /
• 2005

This paper is to analyze the travel distance and the transport size of the vehicle when the AGV carries multiple-load in the tandem automated guided vehicle systems. The size of multiple-load represents the number of load that the AGV can carry simultaneously. The AGV can carry simultaneously multiple-load that load types are different. The transport system of the manufacturing system is a tandem configuration automated guided vehicle system, which is based on the partitioning of all the stations into several non-overlapping single closed loops. Each loop divided has only one vehicle traveling unidirectionally around it. The AGV of each loop has to have sufficient transport capacity that can carry all loads for given unit time. In this paper, the average loaded travel distance and the size of feasible multiple-load of the vehicle are analyzed. A numerical example is shown.

• Journal of Hydrogen and New Energy
• /
• v.31 no.6
• /
• pp.499-508
• /
• 2020

Whilst vehicle-to-every (V2X) is still at a research and development phase, we are nearing the point when this technology could begin to enter in commercial mass markets. However, this transition is unlikely to happen until a number of issues have been resolved which currently hinder the developing of V2X technology and its capacity to provide value to end-users and other actors. This roadmap has set out plan for how these issues may be overcome, based on eight key goals that the automotive industry, network operators and policy makers should aim to achieve. Suggestions for near-term activities that may be carried out towards meeting these goals have also been identified.