• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.30-35
• /
• 2010

The railway vehicle is a multi-body system running on the track which consists of carbody, bogie and wheelset, each of components is connected with rigid mass, spring and damper. each of components has translation motions of longitudinal (X axis), lateral(Y axis) and vertical(Z axis) direction, and rotation motions of X, Y, Z axis which are named Rolling, Pitching and Yawing. The vibration mode of railway vehicle is difficult to find the characteristics of motion during the operation on the track because these happen to independence or duplication motion caused by vehicle, wheel/rail and track irregularity etc. This paper presents the result of ramp test to show the bounce, roll, pitch and yaw mode frequency of the railway vehicle.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.6
• /
• pp.178-188
• /
• 2003

A study on the dynamic analysis of a tracked vehicle for mining on deep-sea bed with very soft soil is presented. An equation for the interaction between track and soft soil is employed to develop a track/soil interaction module called TVAS. The vehicle is modeled as a multi-body dynamic system using a multi-body dynamic analysis program. The developed module is incorporated into the multi-body dynamic analysis program with a user subroutine. The dynamic behavior and design of the mining vehicle on deep-sea bed is investigated.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.6
• /
• pp.65-75
• /
• 2001

Modern vehicles require a high degree of refinement including good driveability. Vehicle driveability, which becomes a key decisive factor f3r marketability, is affected by many parameters such as engine control and the dynamic characteristics in drive lines. Therefore engine and drive train characteristics should be considered to achieve a well balanced vehicle response simultaneously. This paper describes experimental procedures which have been developed to measure engine torque and investigate shuffle characteristics. To analyze the vehicle dynamic behavior, fractional torques and inertia mass moment of engine, and drive train were measured. Shuffle characteristics during tip-in condition were investigated in an experimental vehicle at 2nd and 3rd gear stages. It was found that the shuffle characteristics were caused by sudden changes of engine torque and have a different vibration frequency with gear stage variation. Inertia mass moment of engine including flywheel rotation showed a key factor for the shuffle characteristics.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.3
• /
• pp.16-22
• /
• 2011

This paper presents the potential of in-vehicle data recorder system for monitoring aggressive driving patterns and providing feedback to drivers on their on road behaviour. This system can detect 10 risky types of drivers' driving patterns such as aggressive lane change, sudden brakes and turns with acceleration etc. Vehicle dynamics simulation and vehicle road test have been performed in order to develop driving pattern recognition algorithms. Recorder systems are installed to 50 buses in a single company. Drivers' driving behaviour are monitored for 1 month. The drivers' risky driving data collected by the system are analyzed. Aggressive lane change in 50km/h below is a cause in overwhelming majority of risky driving pattern.

• International Journal of Automotive Technology
• /
• v.7 no.6
• /
• pp.703-714
• /
• 2006

The growing concern surrounding rollover incidences and consequences of Sports Utility Vehicles(SUV) have prompted to investigate the sensitivity of critical vehicle parameters on rollover. In this paper, dynamic rollover simulation of Sports Utility Vehicles is carried out using a validated nonlinear vehicle model in Matlab/Simulink. A standard model is considered and critical vehicle parameters like CG height, track width and wheel base are varied within chosen specified limits to study its influence on roll behavior during a Fishhook steering maneuver. A roll stability criterion based on Two Wheel Lift Off(TWLO) phenomenon is adopted for rollover propensity prediction. Further dynamic rollover characteristics of the vehicle are correlated with Static Stability Factor(SSF), Roll Stability Factor(RSF) and Two Wheel Lift Off Velocity(TWLV). These findings will be of immense help to SUV chassis designers to determine safety limits of critical vehicle parameters and minimize rollover incidences.

• International Journal of Railway
• /
• v.4 no.1
• /
• pp.5-11
• /
• 2011

The purpose of the present study is to develop conceptual design of a railway vehicle simulator based on a scaled model. Although the scaled simulator is limited in its ability to manipulate the full dynamics of a full-size railway vehicle, it has been known to have an advantage in that it could provide means of testing the fundamental dynamic behavior within a limited laboratory space and at low operation cost. The present study proposes a design strategy for a simulator so that a small scaled roller rig could be fabricated and operated in laboratory setting based on the design philosophy. The data obtained from experimental testing using a scale model can be used to verify and interpret the dynamic performance of full-scale railway vehicle by applying appropriate non-dimensional analysis.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.362-369
• /
• 2005

In this paper, a research for the knowledge based configuration design software development of a train vehicle has been presented. Parametric design and knowledge based design concepts have been introduced for rapid design changes and analyses using a commercial CAD software, $CATIA^{/circledR}$ Knowledgeware module. Positions and dimensions of door, small window, large window, and number of seats were used as design parameters. It is crucial for train vehicle design because it enables rapid conceptual design by instant configuration changes. The results of this research can be used as one sub module of the multidisciplinary train vehicle design software and provide a basic data for rolling stock behavior and driver cab ergonomics of a train vehicle.

• Transactions of the Society of Information Storage Systems
• /
• v.11 no.2
• /
• pp.26-30
• /
• 2015

Recently, military vehicles are driven with a lot of electronic devices such as radar, antenna, and information storage devices. However, the military vehicles can be exposed to impact easily. Therefore, they have to be designed robustly in order to ensure the stability of the vehicle and the electronic devices. To achieve that, the dynamic behaviors of the military vehicle should be exactly identified. Therefore, in this research, dynamic behaviors of the vehicles were identified by carrying out road tests and we constructed finite element model to analyze the dynamic characteristics of the vehicle.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.1 s.232
• /
• pp.139-144
• /
• 2005

A vehicle cruise control algorithm using an Interacting Multiple Model (IMM)-based Multi-Target Tracking (MTT) method has been presented in this paper. The vehicle cruise control algorithm consists of three parts; track estimator using IMM-Probabilistic Data Association Filter (PDAF), a primary target vehicle determination algorithm and a single-target adaptive cruise control algorithm. Three motion models; uniform motion, lane-change motion and acceleration motion. have been adopted to distinguish large lateral motions from longitudinal motions. The models have been validated using simulated and experimental data. The improvement in the state estimation performance when using three models is verified in target tracking simulations. The performance and safety benefits of a multi-model-based MTT-ACC system is investigated via simulations using real driving radar sensor data. These simulations show system response that is more realistic and reflective of actual human driving behavior.

• Journal of the Korean Society of Industry Convergence
• /
• v.13 no.2
• /
• pp.85-92
• /
• 2010

This study shows the path generation algorithm for an UGV (Unmanned Ground Vehicle). The developed UGV frame which has a 4-wheel driven mechanism and diesel source is applied. Proposed vehicle system in this research is aimed to military purpose. To achieve the unmanned autonomous driving, following two main issues are considered. First, behavior module for positioning and posture of vehicle system and second, cognition module to receive the information from environment are proposed and verified. To do this, rover which can acquire the positioning information from earth coordinate and IMU (Inertial Measurement Unit) which can measure the posture are combined to design the path planning algorithm.