• 자동차안전학회지
• /
• 제15권3호
• /
• pp.17-26
• /
• 2023

This paper presents extended state feedback control based on impulse response for lane change of autonomous driving vehicle. The triple characteristic root of path tracking system and longitudinal velocity determine feedback gains. We suggest a resemblance of impulse response curve of the system and lane change trajectory of the vehicle. The root affects the duration of lane change and lateral acceleration. The effect of limited lateral acceleration and saturation of steering angle will be analyzed and discussed. Finally, simulation results will show the trajectory of lane change based on impulse response under limitation of lateral acceleration.

• 한국군사과학기술학회지
• /
• 제10권2호
• /
• pp.12-20
• /
• 2007

The aiming ability is a key to improve the accuracy performance of the gun pointing system in the ground military vehicle. This paper describes the new detection method of chatter vibration using disturbance acceleration in the pointing structure. In order to analysis the vibration trends of the pointing system occurred while the vehicle driving, acceleration data obtained from vehicle was processed by using data processing algorithm with moving average and Hilbert transform. The specific mode constants of acceleration were obtained from various disturbances. Vehicle velocity, road condition and property of pointing structure were considered as factors which make the change of vibration trend in vehicle dynamics. Finally, back propagation neural networks have been applied to the pattern recognition of the classification of vibration signal in various driving conditions. Results of signal processing were compared with other condition result and analysed.

• 자동차안전학회지
• /
• 제10권1호
• /
• pp.38-44
• /
• 2018

This paper presents an analysis on driving safety in lane change situation based on road driving data. Autonomous driving is a global trend in vehicle industry. LKAS technologies are already applied in commercial vehicle and researches about lane change maneuver have been actively studied. In autonomous vehicle, not only safety control issue but also imitating human driving maneuver is important. Driving data analysis in lane change situation has been usually dealt with ego vehicle information such as longitudinal acceleration, yaw rate, and steering angle. For this reason, developing safety index according to surrounding vehicle information based on human driving data is needed. In this research, driving data is collected from perception module using LIDAR, radar and RT-GPS sensors. By analyzing human driving pattern in lane change maneuver, safety index that considers both ego vehicle and surrounding vehicle state by using relative velocity and longitudinal clearance has been designed.

• 자동차안전학회지
• /
• 제11권3호
• /
• pp.37-42
• /
• 2019

This paper presents an autonomous acceleration planning algorithm for pedestrian collision avoidance at urban. Various scenarios between pedestrians and a vehicle are designed to maneuver the planning algorithm. To simulate the scenarios, we analyze pedestrian's behavior and identify limitations of fusion sensors, lidar and vision camera. Acceleration is optimally determined by considering TTC (Time To Collision) and pedestrian's intention. Pedestrian's crossing intention is estimated for quick control decision to minimize full-braking situation, based on their velocity and position change. Feasibility of the proposed algorithm is verified by simulations using Carsim and Simulink, and comparisons with actual driving data.

• 한국ITS학회 논문지
• /
• 제17권6호
• /
• pp.54-66
• /
• 2018

본 연구에서는 고속도로 졸음쉼터의 진 출입 차량 주행속도 조사를 통해 졸음쉼터 가 감속차로 길이, 설치위치의 종단경사 및 곡선반경이 주행차량에 미치는 영향을 분석하였다. 또한, 졸음쉼터 적정 가 감속차로 길이 산정을 위해, VISSM을 활용하여 진출입부 길이 별 시나리오를 구축하고, 가 감속차로를 이용하는 차량의 개별차량 주행궤적 자료를 추출하여 차량의 감속 및 가속도의 표준 편차를 산출하였다. 주행속도 조사 결과 졸음쉼터 설치위치의 곡선반경 및 종단경사에 따른 속도차이가 있는 것으로 나타났으며 무엇보다 가 감속차로 길이에 따른 차량 간의 속도차이가 크게 나타났다. 특히 가 감속차로 길이가 짧게 설치된 졸음쉼터의 경우 차량 간의 속도차이가 큰 것으로 조사되었으며 차량이 졸음쉼터 진입 시 충분히 감속을 하지 못하고 진입하거나 졸음쉼터 이용 후 본선 진입 시 충분히 가속을 하지 못한 채로 본선에 진입하는 것으로 조사되어 위험성이 높은 것으로 분석되었다. 가 감속차로 길이에 따른 시뮬레이션 분석결과 진입부의 경우 245m 이상의 감속차로 길이 확보가 필요할 것으로 분석되었으며, 가속차로의 경우 370m 이상으로 설치하였을 때 안전한 진출이 가능한 것으로 분석되었다.

• 대한기계학회논문집A
• /
• 제24권4호
• /
• pp.926-936
• /
• 2000

Actual and strict definition of the shift quality for the powertrain system equipped an automatic transmission must be understood through the acceleration change of the vehicle body, which the driver directly feels as a shift shock. For this reason, it is necessary to concurrently analyze the characteristics of the powertrain system and the vehicle body. This paper presents the mathematical model of the vehicle body, which is based on the equivalent lumped system, to append to the developed model of the powertrain system. The concept of tire slip is also introduced for the experimental relationship between tire/road and driving force. Using the developed dynamic simulation programs, shift transients characteristics are analyzed. Theoretical results are compared with experimental ones from real car tests in equal conditions in order to prove the validity of presented model. In these tests, the system to measure the vehicle acceleration is used with various speeds and engine throttle sensors. It is expected that the presented modeling techniques can provide good predictions of the vehicle driving comfortability.

• 한국추진공학회지
• /
• 제11권2호
• /
• pp.62-70
• /
• 2007

지향성능은 발사차량의 정확성에 있어서 중요한 요소이다. 본 연구는 외란 가속도를 이용하여 지향구조물의 진동을 감지하는 방안과 실험 결과에 대하여 기술하였다. 주행 중 발생하는 진동 경향을 분석하기 위하여 가속도 자료를 이동평균과 힐버트 변환을 이용하여 신호 처리하였다. 다양한 외란에 대하여 가속도의 모드 계수를 얻었으며, 차량속도, 노면조건, 지향구조물의 특성을 차량 동특성의 진동을 변화시키는 요소로 간주하였다. 마지막으로 다양한 주행 조건의 진동 신호를 분류하기 위한 패턴인식에 역전파 신경망 이론을 이용하였다. 각 조건에 대하여 실험 결과를 비교 분석하였다.

• 한국자동차공학회논문집
• /
• 제7권5호
• /
• pp.213-220
• /
• 1999

The life data analysis of the system and component are useful to describe the result of reliability test in product life to satisfy customer's growing need and to change test specifications or design criteria by life data analysis. And vehicle durability tesr occurred market environment. In this study, a statistical analysis for the wear life of brake pad linings helped perform correlation procedure between vehicle durability test and market. B-life values of the brake pad wear life data from both vehicle durability test and marker usage were compared to determine acceleration of the test by the Weibull, normal and log-normal distribution. The acceleration coefficient of the vehicle durability test can access to evaluate design criteria of product and test specification.

• 한국자동차공학회논문집
• /
• 제19권3호
• /
• pp.16-22
• /
• 2011

This paper presents the potential of in-vehicle data recorder system for monitoring aggressive driving patterns and providing feedback to drivers on their on road behaviour. This system can detect 10 risky types of drivers' driving patterns such as aggressive lane change, sudden brakes and turns with acceleration etc. Vehicle dynamics simulation and vehicle road test have been performed in order to develop driving pattern recognition algorithms. Recorder systems are installed to 50 buses in a single company. Drivers' driving behaviour are monitored for 1 month. The drivers' risky driving data collected by the system are analyzed. Aggressive lane change in 50km/h below is a cause in overwhelming majority of risky driving pattern.

• 한국자동차공학회논문집
• /
• 제21권2호
• /
• pp.81-86
• /
• 2013

This paper presents the lane change system for collision avoidance. The proposed algorithm for the collision avoidance consists of path generation and path following. Using a calculated TTC (Time to Collision), partial braking is operated and collision avoidance path is generated considering relative distance, velocity and acceleration. Based on the collision avoidance path, desired yaw angle and yaw rate are calculated for the automated path following. The lateral controller is designed by a Lyapunov function approach using 3 D.O.F vehicle model and vehicle parameters. The required steering angle is determined from wheel velocity, longitudinal and lateral velocity in order to follow the desired yaw angle and yaw rate. This system is developed MATLAB/Simulink and its performance is evaluated using the commercial software CarSim.