• 인지과학
• /
• 제21권4호
• /
• pp.459-480
• /
• 2010

대화 시스템은 사용자의 의도를 파악하기 위해 발화 문장으로부터 다양한 형태론적 분석을 시도한다. 하지만 사용자는 발화 문장에 포함된 사전적 의미를 통해 의도를 전달할 뿐만 아니라 현재 감정 상태에 따라서 사전적 의미와는 다른 의도를 표현하거나 동일한 의미를 갖는 발화에서 다양한 의도를 표현한다. 따라서 대화에서 사용자의 감정을 파악하는 것은 사용자의 의도를 다양한 방향으로 분석할 수 있게 한다. 본 연구는 기계 학습 방법을 사용하여 사용자 발화 문장에 자동으로 감정 범주를 할당하는 방법을 제안한다. 일반적 감정 범주를 정의하기 위해 세부적인 감정 모델로 인정받고 있는 Plutchick의 감정 모델을 사용하여 9개 감정 범주를 재 정의하고 감정 분류를 위한 자질 집합을 문장 자질과 선험적 자질 그리고 문맥 자질로 구분하였다. 실험을 통하여 3가지 자질들의 최적 조합을 구성하고 감정의 자동 분류를 위해 SVM 분류기를 사용하였다. 실험 결과에서 제안 시스템은 비교 시스템에 비해 15% 높은 62.8%의 F1-평가치 성능을 나타냄으로서 제안된 방법이 감정 분류에 효과적임을 증명한다.

• 한국유체기계학회 논문집
• /
• 제13권5호
• /
• pp.43-53
• /
• 2010

This study investigates a design optimization of a rotating two-pass rectangular cooling channel with staggered arrays of pin-fins. The radial basis neural network method is used as an optimization technique with Reynolds-averaged Navier-Stokes analysis of fluid flow and heat transfer with shear stress transport turbulent model. The ratio of the diameter to height of the pin-fins and the ratio of the streamwise spacing between the pin-fins to height of the pin-fin are selected as design variables. The optimization problem has been defined as a minimization of the objective function, which is defined as a linear combination of heat transfer related term and friction loss related term with a weighting factor. Results are presented for streamlines, velocity vector fields, and contours of Nusselt numbers, friction coefficients, and turbulent kinetic energy. These results show how fluid flow in a two-pass square cooling channel evolves a converted secondary flows due to Coriolis force, staggered arrays of pin-fins, and a $180^{\circ}$ turn region. These results describe how the fluid flow affects surface heat transfer. The Coriolis force induces heat transfer discrepancy between leading and trailing surfaces, having higher Nusselt number on the leading surface in the second pass while having lower Nusselt number on the trailing surface. Dean vortices generated in $180^{\circ}$ turn region augment heat transfer in the turning region and in the upstream region of the second pass. As the result of optimization, in comparison with the reference geometry, thermal performance of the optimum geometry shows the improvement by 30.5%. Through the optimization, the diameter of pin-fin increased by 14.9% and the streamwise distance between pin-fins increased by 32.1%. And, the value of objective function decreased by 18.1%.

• 한국미생물·생명공학회지
• /
• 제43권1호
• /
• pp.22-30
• /
• 2015

CSF is a major concern for the swine industry, representing currently the most epizootically dangerous disease to the species. Numerous CSFV isolates with various degrees of virulence have already been isolated worldwide, ranging from low virulent strains that do not result in any apparent clinical signs to highly virulent strains that cause a severe per acute hemorrhagic fever with very high mortality. The molecular epidemiology of CSFVs has proven to be an essential tool for effective disease control and the development of safe and effective vaccines. Therefore, this study cloned and sequenced local CSFV isolates, and conducted a phylogenetic analysis based on the E2 glycoprotein encoding sequences.The RNA was extracted from PK15 cell culture passaged CSFV isolates, the cDNA prepared, and the complete E2 gene amplified with a product size of 1186 bp. The gelpurified PCR product was cloned into a pGEMT easy vector and the positive clone commercially sequenced. Aligning the nucleotide (1119 bp) and amino acid (373) sequences with 29 reference strains revealed nucleotide and amino acid sequence identities of 82.60-97.80% and 88.70-98.70%, respectively, indicating a higher mutation rate of the field CSFV strains. The phylogenetic analysis based on the complete E2 amino acid sequences also revealed a reliable differentiation of all the analyzed strains into specific genetic groups and subgroups, plus the local isolate (CSFV-E2) was found to cluster with the CSFV subgroup 2.2. Thus, the full-length E2 cds proved to be most suitable for a reliable and statistically significant phylogenetic analysis of CSFV isolates.

• Journal of Astronomy and Space Sciences
• /
• 제17권2호
• /
• pp.317-328
• /
• 2000

The solar wind contributes to the formation of unique space environment called the Earth's magnetosphere by various interactions with the Earth's magnetic field. Thus the solar-terrestrial environment affects the Earth's magnetic field, which can be observed with an instrument for the magnetic field measurement, the magnetometer usually mounted on the rocket and the satellite and based on the ground observatory. The magnetometer is a useful instrument for the spacecraft attitude control as well as the Earth's magnetic field measurements for the spacecraft purpose. In this paper, we present the preliminary design and test results of the two onboard magnetometers of KARI's (Korea Aerospace Research Institute) sounding rocket, KSR-3, which will be launched four times during the period of 2001-02. The KSR-3 magnetometers consist of the fluxgate magnetometer, MAG/AIM (Attitude Information Magnetometer) for acquiring the rocket flight attitude information, and of the search-coil magnetometer, MAG/SIM (Scientific Investigation Magnetometer) for the observation of the Earth's magnetic field fluctuations. With the MAG/AIM, the 3-axis attitude information can be acquired by the comparison of the resulting dc magnetic vector field with the IGRF (International Geomagnetic Reference Field). The Earth's magnetic field fluctuations ranging from 10 to 1,000 Hz can also be observed with the MAG/SIM measurement.

• 한국측량학회지
• /
• 제25권6_1호
• /
• pp.507-516
• /
• 2007

Segmentation and organization of the LiDAR (Light Detection and Ranging) data of the Earth's surface are difficult tasks because the captured LiDAR data are composed of irregularly distributed point clouds with lack of semantic information. The reason for this difficulty in processing LiDAR data is that the data provide huge amount of the spatial coordinates without topological and/or relational information among the points. This study introduces LiDAR data segmentation technique by utilizing histograms of the LiDAR height image data and analyzing roof shape for 3D reconstruction and visualization of the buildings. One of the advantages in utilizing LiDAR height image data is no registration required because the LiDAR data are geo-referenced and ortho-projected data. In consequence, measurements on the image provide absolute reference coordinates. The LiDAR image allows measurement of the initial building boundaries to estimate locations of the side walls and to form the planar surfaces which represent approximate building footprints. LiDAR points close to each side wall were grouped together then the least-square planar surface fitting with the segmented point clouds was performed to determine precise location of each wall of an building. Finally, roof shape analysis was performed by accumulated slopes along the profiles of the roof top. However, simulated LiDAR data were used for analyzing roof shape because buildings with various shapes of the roof do not exist in the test area. The proposed approach has been tested on the heavily built-up urban residential area. 3D digital vector map produced by digitizing complied aerial photographs was used to evaluate accuracy of the results. Experimental results show efficiency of the proposed methodology for 3D building reconstruction and large scale digital mapping especially for the urban area.

• 한국측량학회지
• /
• 제30권6_1호
• /
• pp.575-581
• /
• 2012

일반적으로 VRS 데이터 생성 등을 위해 GPS 상시관측망으로부터 대류지연 및 전리층 지연량을 계산하여야 하며 이를 위해 다양한 모델링 기법과 추정 이론을 적용하게 된다. 본 연구에서는 대류 및 전리층 지연량의 계산을 위해 칼만필터를 기반으로 모델링을 수행하였으며 상태벡터의 특성을 고려하여 상태전이행렬 및 분산-공분산 값을 결정하였다. 수신기의 좌표 및 천정방향의 대류지연량과 이중차분전리층 지연량은 각각 random walk 및 first-order Gauss-Markov 프로세스로 모델링을 하였다. 모델링한 필터의 검증을 위해 구현된 칼만필터를 이용하여 상시관측소 데이터를 처리하였으며 그 결과 수신기의 좌표뿐만 아니라 천정방향의 대류지연량 및 이중차분전리층 지연량을 성공적으로 추출할 수 있었다. 따라서 향후 알고리즘을 통해 추출된 대기효과에 VRS 데이터 등의 생성에 유용하게 사용될 수 있을 것이다.

• 한국음향학회지
• /
• 제21권5호
• /
• pp.478-484
• /
• 2002

표적 탐지를 위한 선형 견인 어레이는 해수의 움직임이나 견인선의 기동 방향 등에 의해 그 형상이 비선형화 된다. 이러한 비선형성의 존재는 입사신호의 파라미터 추정 오차를 유발하므로 본 논문에서는 비선형 형상의 견인 어레이를 위한 빔형성 기법을 제안한다. 제안된 기법은 두 개의 보조센서를 사용하여 수동 견인 어레이의 첫 번째 하이드로폰과 마지막 하이드로폰의 위치를 파악한 후, 두 하이드로폰 사이의 비선형 형상조향 벡터를 선형화 (Linearization)한다. 실제 수중환경에서의 컴퓨터 모의 실험을 통하여 성능 분석을 행한 결과, 비선형 견인 어레이의 형상에 관계없이 빔패턴은 이상적인 형태를 지님을 확인하였다. 그리고 다양한 입사신호의 신호 대 잡음비 환경 하에서 위상 성분 추정의 한계를 보임으로써 제안된 기법의 입사각 추정 성능을 평가하였으며, 이와 더불어 선형 형상을 가정한 바틀렛 빔형성 기법과의 비교 분석 결과, 현격한 성능 차이를 보였음을 확인하였다.

• 한국지능시스템학회논문지
• /
• 제27권2호
• /
• pp.106-112
• /
• 2017

본 논문에서는 자기부상 물류이송시스템의 부상 및 추진제어기 설계 방법을 제안하였다. 부상제어기는 롤과 피치 움직임을 최소화시키기 위해 전자석간의 상호영향을 고려하여 설계하였다. 자기부상이송시스템의 구조적인 단점을 해결하기 위하여 기준입력단에 지수형 필터를 적용하여 기존 제어기의 문제점을 개선하였다. DSP기반의 제어하드웨어를 개발하고, 정격 공극 부상 실험을 통해 부상제어기법이 설계 목표를 만족함을 검증하였다. 추진제어기는 공간벡터 전압변조기법을 사용하고, 레일의 전 구간에 부착된 바코드 정보로부터 절대위치를 감지하여 위치 및 속도 프로파일을 추종하도록 설계하였다. 추진제어 왕복 이동 실험을 통해 위치 제어 결과가 만족할만한 성능임을 확인하였다.

• 전기학회논문지P
• /
• 제59권3호
• /
• pp.279-287
• /
• 2010

Interior permanent magnet synchronous motor(IPMSM) adjustable speed drives offer significant advantages over induction motor drives in a wide variety of industrial applications such as high power density, high efficiency, improved dynamic performance and reliability. This paper proposes efficiency optimization control of IPMSM drive using adaptive fuzzy learning controller(AFLC). In order to optimize the efficiency the loss minimization algorithm is developed based on motor model and operating condition. The d-axis armature current is utilized to minimize the losses of the IPMSM in a closed loop vector control environment. The design of the current based on adaptive fuzzy control using model reference and the estimation of the speed based on neural network using ANN controller. The controllable electrical loss which consists of the copper loss and the iron loss can be minimized by the optimal control of the armature current. The minimization of loss is possible to realize efficiency optimization control for the proposed IPMSM. The optimal current can be decided according to the operating speed and the load conditions. This paper considers the design and implementation of novel technique of high performance speed control for IPMSM using AFLC. Also, this paper proposes speed control of IPMSM using AFLC1, current control of AFLC2 and AFLC3, and estimation of speed using ANN controller. The proposed control algorithm is applied to IPMSM drive system controlled AFLC, the operating characteristics controlled by efficiency optimization control are examined in detail.

• 전기학회논문지
• /
• 제62권3호
• /
• pp.355-364
• /
• 2013

Respect to the input AC voltage and output DC voltage, conventional three-phase PWM rectifier is classified as the voltage type rectifier with boost capability and the current type rectifier voltage with buck capability. Conventional PWM rectifier can not at the same time the boost and buck capability and its bridge is weak in the shoot- through state. These problems can be solved by Z-source PWM rectifier which has all characteristic of voltage and current type PWM rectifier. By shoot-through duty ratio control, the Z-source PWM rectifier can buck and boost at the same time, also, there is no need to consider the dead time. This paper proposes the input AC voltage sensorless control method of a three-phase Z-source PWM rectifier in order to accomplish the unity input power factor and output DC voltage control. The proposed method is estimated the input AC voltage by using input AC current and output DC voltage, hence, the sensor for the input AC voltage detection is no needed. comparison of the estimated and detected input AC voltage, estimated phase angle of the input voltage, the output DC voltage response for reference value, unity power factor, FFT(Fast Fourier Transform) of the estimated voltage and efficiency are verified by PSIM simulation.