• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.5
• /
• pp.27-36
• /
• 2001

This paper proposes new design algorithms based on stochastic relaxation (SR) for an on-line vector quantizer (VQ) design. These proposed SR methods solve the local entrapment problems of the conventional Kohonen learning algorithm (KLA). These SR methods cover two different types depending upon the use of simulated annealing (SA) : the one that uses SA is called the OLVQ SA and the other the OLVQ SR. These methods arc combined with the KLA and therefore preserve the its convergence properties. Experimental results for Gauss Markov sources, real speech and image demonstrate that the proposed algorithms can consistently provide better codebooks than the KLA.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.507-510
• /
• 2002

An algorithm of 3-D particle image velocimetry(3D-PIV) was developed for the measurement of 3-D velocity Held of complex flows. The measurement system consists of two or three CCD camera and one RGB image grabber. Flows size is $1500{\times}100{\times}180(mm)$, particle is Nylon12(1mm) and illuminator is Hollogen type lamp(100w). The stereo photogrammetry is adopted for the three dimensional geometrical mesurement of tracer particle. For the stereo-pair matching, the camera parameters should be decide in advance by a camera calibration. Camera parameter calculation equation is collinearity equation. In order to calculate the particle 3-D position based on the stereo photograrnrnetry, the eleven parameters of each camera should be obtained by the calibration of the camera. Epipolar line is used for stereo pair matching. The 3-D position of particle is calculated from the three camera parameters, centers of projection of the three cameras, and photographic coordinates of a particle, which is based on the collinear condition. To find velocity vector used 3-D position data of the first frame and the second frame. To extract error vector applied continuity equation. This study developed of various 3D-PIV animation technique.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.6
• /
• pp.726-735
• /
• 2003

A Process of 3-D Particle image velocimetry, called here, as '3-D volume PIV' was developed for the full-field measurement of 3-D complex flows. The present method includes the coordinate transformation from image to camera, calibration of camera by a calibrator based on the collinear equation, stereo matching of particles by the approximation of the epipolar lines, accurate calculation of 3-D particle positions, identification of velocity vectors by 3-D cross-correlation equation, removal of error vectors by a statistical method followed by a continuity equation criterior, and finally 3-D animation as the post processing. In principle, as two frame images only are necessary for the single instantaneous analysis 3-D flow field, more effective vectors are obtainable contrary to the previous multi-frame vector algorithm. An Experimental system was also used for the application of the proposed method. Three analog CCD camera and a Halogen lamp illumination were adopted to capture the wake flow behind a bluff obstacle. Among 200 effective particle s in two consecutive frames, 170 vectors were obtained averagely in the present study.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.2
• /
• pp.202-207
• /
• 2010

In this paper, we present an automatic sentiment classification method for on-line movie reviews that do not contain explicit sentiment rating scores. For the sentiment polarity classification, positive or negative, we use a Support Vector Machine classifier based on syllable kernel that is an extended model of string kernel. We give some experimental results which show that proposed syllable kernel model can be effectively used in sentiment classification tasks for on-line movie reviews that usually contain a lot of grammatical errors such as spacing or spelling errors.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.234-237
• /
• 2007

Road networks are important geospatial databases for various GIS (Geographic Information System) applications. Road digital maps may contain geometric spatial errors due to human and scanning errors, but manually updating roads information is time consuming. In this paper, we developed a new road features updating methodology using from multispectral high-resolution satellite image and pre-existing vector map. The approach is based on initial seed point generation using line segment matching and a modified double snake algorithm. Firstly, we conducted line segment matching between the road vector data and the edges of image obtained by Canny operator. Then, the translated road data was used to initialize the seed points of the double snake model in order to refine the updating of road features. The double snake algorithm is composed of two open snake models which are evolving jointly to keep a parallel between them. In the proposed algorithm, a new energy term was added which behaved as a constraint. It forced the snake nodes not to be out of potential road pixels in multispectral image. The experiment was accomplished using a QuickBird pan-sharpened multispectral image and 1:5,000 digital road maps of Daejeon. We showed the feasibility of the approach by presenting results in this urban area.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1A
• /
• pp.115-124
• /
• 2007

In this paper, the I/Q mismatch problem between the transmission line and antenna switch is solved by a new CPW matching circuit for a VoWLAN terminal with 54 Mbps communication speed through the IEEE 802.11 b/g CCK/OFDM. I/Q performances with the new matching circuit are analyzed and improved by the output spectrum mask, the characteristics of the EVM(Error Vector Magnitude) due to the nonlinear CCK/OFDM demodulation data, and receiver's sensitivity.

• Journal of Power Electronics
• /
• v.17 no.3
• /
• pp.641-652
• /
• 2017

This paper proposes a cost-effective topology to drive a three-phase open-end load based on a five-leg indirect matrix converter (IMC) and a space vector modulation (SVM) method. By sharing an inverter leg with two load terminals, the proposed topology can reduce the number of power switches when compared to topologies based on a direct matrix converter or a six-leg IMC. The new SVM method uses only the active vectors that do not produce common-mode voltage (CMV), which results in zero CMV across the load phase and significantly reduces the peak value of the CMV at the load terminal. Furthermore, the proposed drive system can increase the voltage transfer ratio up to 1.5 and provide a superior performance in terms of an output line-to-line voltage with a three-level pulse-width modulation waveform. Simulation and experimental results are given to verify the effectiveness of the proposed topology and the new SVM method.

• Korean Journal of Animal Reproduction
• /
• v.27 no.1
• /
• pp.15-23
• /
• 2003

Lactadherin (formerly known as BA46), a major glycoprotein of the human milk fat globule membrane, is abundant in human breast milk and breast carcinomas and may prevent symptomatic rotavirus infections. In this study, under the control of tissue specific and hormonal inducible mouse whey acidic protein (WAP) promote., the expression pattern of lactadherin (Ltd) in lactogenic hormone-dependent mouse mammary epithelial cell line HC11 were tested. pLNWLtd construct containing 2.4 kilobases of the WAP promoter and 1.5 kilobases of human lactadherin gene was stably transfered into HC11 cells using retroviral vector system. Integration and expression level of the transgene was estimated using PCR and RT-PCR, respectively. Prominent induction of Ltd gene under the WAP promoter was accomplished in the presence of insulin, hydrocortisone and prolactin. Compared to the control (cells cultured with insulin alone), however we observed that the WAP promoter was leaky. These data indicate that luther studies are needed in finding an appropriate promoter other than WAP promoter because of its leakiness.

• The KIPS Transactions:PartD
• /
• v.14D no.7
• /
• pp.801-808
• /
• 2007

Video coding standards such as MPEG-2, MPEG-4, H.263, and H.264 transmit a compressed video data using wired/wireless communication line with limited bandwidth. Because highly compressed bit-streams is likely to fragile to error from channel noise, video is damaged by error. There have been many research works on error concealment techniques, which recover transmission errors at decoder side [1, 2]. We designed an error concealment technique for lost motion vectors of H.264 video coding. In this paper, we propose a Kalman filter based motion vector recovery scheme, and experimented with standard video sequences. The experimental results show that our scheme restores original motion vector with more precision of 0.91 - 1.12 on average over conventional H.264 decoding with no error recovery.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.146-151
• /
• 2009

A reward of the work which used physical computing in fields artistic modern installation is becoming large. But the example that used a robot cannot try to easily look it up on a tool of the drawing which isn't robot use for interaction. I will mention it about a user and a drawing system design and the developmental process which I can communicate with at these papers. I used a Mindstorm NXT system to have been said in Lego companies in the robot which composed working environment, and I classified it to virtual environments that I forecasted environmental actual drawing this, and I did simulate. I used an Icommand library to control a NXT system, and drawing used a processing library in actual environments for the purpose of in order to to express to virtual environment. I got image information, and I expressed to a vector method SVG file to bases for line drawing. This system can have already made it according to demand of a user as real-time communication is possible by bluetooth working together. These figures can work to one performance not being stopping to the results of already in processes doing drawing.