• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.74-76
• /
• 1995

ZnO varistor with composition of ZnO(90wt%)-Bi$_2$O$_3$(3wt%)-Sb$_2$O$_3$(3.6wt%)-CO$_2$O$_3$(1.16wt%)-NiO(0.88wt%)-MnO$_2$(0.71wt%)-Cr$_2$O$_3$(0.93wt%) according to Al$_2$O$_3$addtive was fabricated by sintering methods. The effects of Al$_2$O$_3$dopant on the I-V characteristics of ZnO varistors were investigated. These changes of electric properties were found to be caused by the variation of grains and grain boundary related to Al$_2$O$_3$dopting. And the conductive mechanism of ZnO varistor in prebreakdown region were investigated with defect model.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.11
• /
• pp.946-952
• /
• 2002

The electrical and dielectric characteristics of ZPCCY-based varistor ceramics were investigated in the sintering time range of 1∼3 h. Increasing sintering time deteriorated the nonlinearity, in which nonlinear exponent is decreased from 51.2 to 23.8 and leakage current is increased from 1.3 to 5.6 $\mu$A. As sintering time increases, the donor concentration was decreased in the range of (1.25∼l.73)$\times$10$\^$18/cm$\^$-3/ and the density of interface states is (3.64∼94.19)$\times$10$\^$12/cm$\^$-2/ with increasing sintering time. The increase in sintering time caused tan $\delta$ to increase in the range of 0.043 to 0.062 and relaxation time to increase in the range of 1.55 to 2.23 ㎲.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1679-1681
• /
• 1996

ZnO varistor with composition of 89wt%-ZnO, 3.0wt%-$Bi_{2}O_{3}$, 3.6wt%-$Sb_{2}O_{3}$, 1.16wt%-CoO, 0.88wt%-NiO, 0.71wt%-$MnO_2$, 0.93wt%-$Cr_{2}O_{3}$, 0.013wt%-$Al_{2}O_{3}$ was fabricated by sintering methods. The effects of annealing on the J-E characteristics of ZnO varistors were investigated. These changes of electric properties were found to be caused by the variation of grains and grain boundary related to annealing. And the conductive mechanism and micostructure of ZnO varistor were researched using I-V meter, SEM and XRD.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.117-120
• /
• 1999

The relationship between the DC degradation characteristics of the ZnO varistor and the ambient sintering-process is investigated in this study. ZnO varistors made of Matsuoka's composition were fabricated by standard ceramic techniques. The ambient sintering-process is performed at the extraordinary electrical-furnace which is equipped with the vacuum system. The Gas of sintering process was oxygen, nitrogen, argon, air respectively. The microstructure of ZnO varistors be made use of SEM equipment. The condition of DC degradation tests were conducted at $115\pm2^{\circ}C$ for periods up to 13 h. Current-voltage analysis is used to determine nonlinear coefficients($\alpha$). Resistance-frequency and capacitance-frequency analysis are accomplished to the understanding of electrical properties as DC degradation test. From above analysis, it is found that the ZnO varistor sintered in oxygen atmosphere showed superior properties at the DC degradation test.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.275-279
• /
• 2005

This paper presents leakage current characteristics as a function of injected number and magnitude of impulse current, when$8/20{\mu}s$ lightning impulse current is injected to ZnO varistor. The life of ZnO varistor against $8/20{\mu}s$ lightning impulse current was evaluated. The injected number of the test current to breakdown was inversely proportional to the amplitude of impulse current.

• Proceedings of the KIEE Conference
• /
• 1987.07a
• /
• pp.556-560
• /
• 1987

To enhance the breakdown properties of low voltage-oriented ZnO varistor, the samples were fabricated with the amounts of si-oxides and the sintering conditions. And then, to lower the breakdown voltage the $TiO_2$-added samples were fabricated. We investigated the nonlinear exponent, the nonlinear resistance and the V-I characteristics of samples. And we discussed with microstructures by use of SEM and the position of Si by EDS. Si-oxides, especially, largely enhanced the nonlinear exponent. In this case optimum sintering condition was $1200-1250^{\circ}C$-1hr and $TiO_2$ addition lowered the breakdown voltage.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.279-281
• /
• 1996

This paper deals with the two stage surge protection device by using varistor and LC low pass filter. Recently varistor alone has been used with overvoltage protection devices for the AC power mains and has same problems associated with high remnant voltage and noise. In this work, in order to improve the cutoff performance of surge protection device, the lightning surge protection device having two stage hybrid circuit for an AC single phase mains was designed and fabricated. Operation characteristics and surge clamping performance of the surge protection device in an $8/20{\mu}s$ surge current are investigated. As a consequence, it is found that the proposed two stage surge protective device for AC power mains has a variety of advantages such as a smaller clamping voltage, high frequency noise reduction and large clamping capacity.

• The Korean Journal of Ceramics
• /
• v.5 no.4
• /
• pp.357-362
• /
• 1999

ZnO varistors containing cobalt, praseodymium and calcium oxides were prepared. The current-voltage charcteristics and microstructures of the specimens were investigated with respect to calcium addition and sintering temperature. The potential barrier heights and the carrier densities were estimated from C-V relations. The compatibility of Ag-Pd as an internal electrode for multilayer chip varistor was also examined.

• The Korean Journal of Ceramics
• /
• v.3 no.4
• /
• pp.239-244
• /
• 1997

The Voronoi network can be used to effectively simulate the microstructure of ZnO varistors. The nonuniformity in microstructure of simulated ZnO varistor can be changed by setting different disorder degree of Voronoi network. In the region of disorder degree larger than 3 where the simulated microstructures are similar to those the actual ones of ZnO varistors, a chaotic phenomenon exists in the microstructure characteristics. This chaotic property can simulate the original behavior of nonuniformity of electrical characteristics caused by microstructures of ZnO varistors.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1158-1161
• /
• 2004

This paper presents structural characteristics of station class lightning arresters and electrical characteristics of manufactured ZnO varistor blocks which are usable in those arresters. Three types of station class lightning arresters were investigated and those are a ceramic arrester, a FRP tube type polymer arrester, and a FRP rod type polymer arrester. Each arrester has merits and demerits with structural characteristics. In general, polymer arresters were made of silicon rubber for housing materials, FRP tube or rod for mechanical strength, ZnO blocks for electrical characteristics, and metal parts for electrical contact and the silicon rubber, the housing materials, was directly injected to the arrester module which was assembly composed of electrodes, ZnO blocks and FRP tube or rod, and to prevent the nonlinear electric fields distribution on upper parts of arresters, the grade ring was adopted to the upper electrodes. The reference voltage, nonlinear coefficient, residual voltage, and voltage ratio of manufactured ZnO varistors are 4.90kV, 50, 9.54kV, 1.94, respectively. Compared to designed electrical characteristics, the reference voltage was low for 600v and the voltage ratio was slightly high. However, the characteristics of discharge withstand was so excellent that the mechanical destruction does not occur at the impulse current of $8/20{\mu}s$ 10kA for 100 times.