• Analytical Science and Technology
• /
• v.25 no.3
• /
• pp.178-189
• /
• 2012

As phthalates classified as toxic to reproduction category 2 and endocrine disrupting chemicals were more strictly regulated as Substances of Very High Concern (SVHC) for authorization in under EU REACH and considered as priority substances in RoHS II, standardization of phthalate testing method is now being proposed in IEC 62321 of IEC TC 111 and the 2nd revision of KS M 1991 is also finished. In order to assist standardization activities related to phthalating testing, solvent extraction part of existing national standards were compared and verified. Recovery of DEHP (diethylhexyl phthalate) from PVC (polyvinyl chloride) by Soxhlet extraction increased in the order of methanol, toluene, dichloromethane and hexane from 46.9% to 95.3% as measured by GC-MS. Optimum extraction time was verified to be 6 hours using hexane. Recovery of DBP (dibutyl phthalate), BBP (butylbenzyl phthalate), and DEHP from different matrixes such as PVC, nitro cellulose, ABS (acrylonitrile butadiene styrene). and EPDM(ethylene propylene diene monomer) rubber were evaluated to be more than 90% up to 99%. The detection limits of phthalates in solvent extraction followed by GC-MS analysis were 0.08~0.3 ${\mu}g/mL$ in solution and 8~30 mg/Kg in polymeric samples. GC-MS analyses of phthalates were carried out using different solvent extraction based on the EN 14372, ASTM D 7083, Japanese test method (MHLW 0906-4) and KS M 1991, proving that equivalent recoveries ranging from 98%~99% were obtained. DBP and DEHP were detected in three consumer products such as a child toy, a power cable and manicure with the amount of 22~1,910 mg/kg.

• Applied Biological Chemistry
• /
• v.4
• /
• pp.23-28
• /
• 1963

Various species of the genus Capsicum contain in their fruits an intensively sharp and pungent substance, Capsaicin, which was first isolated in an almost pure state by Thresh. Containing the pungent principle, Capsicums are used extensively in food as a spice and in medicine as a rubefacient and carminative. Numerous methods have been proposed for the isolation, the chemical structure and the quantitative determination of Capsaicin. Modifying the several methods described before, the Capsaicin contents in various species of the genus Capsicum were determined as follows. (1) The isolation of pure Capsaicin was the essential first step for the determination of Capsaicin contents. Powdered cayenne pepper was extracted with acetone. By the method of ether alkali partition extraction slightly modified at this laboratory and by the recrystallization with light petroleum ether that was repeated ten times, the pure crystalline Capsaicin was obtained. Using this Capsaicin, the standard absorption curve was drawn with Beckman spectrophotometer model DU for the quantitative determination of Capsaicin. 92) The powdered sample was extracted in a Soxhlet extractor with ether-acetone solvent system(3:1) for 25 hours. Capsaicin in this ether-acetone extracts was efficiently separated in a pure state by paper partition chromatography using 58% methanol solution as developing agent. It was found that 58% methanol was one of the most valuable solvent to separate Capsaicin from impurities such as sterols, fatty acids, waxes and carotenoid pigments. (3) The colorimetric method modifying the Schulte-Kruger's method which consists of measuring the red color produced with diazobenzenesulphonic acid was used. Capsaicin in various species of the genus Capsicum was determined quantitatively with use of Beckman spectrophotometer model DU at $480\;m{\mu}$.

• KSBB Journal
• /
• v.23 no.4
• /
• pp.297-302
• /
• 2008

In this work, the amounts of Flavone C-glycosides homoorientin, orientin extracted from Black bamboo by various ultrasonic waves frequency (35, 72, 170 KHz, 300 Watt $\pm$1) time (15, 30, 60 min) and temperature ($25^{\circ}C$) were compared using 50% aqueous ethanol solution. And describesanalysis of the antioxidant potential of Black bamboo using an high-performance liquid chromatography (HPLC) on-line $ABTS^+$antioxidant screening method. In conjunction with the analysis of their 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid ($ABTS^+$) radical scavenging ability. The optimum operating conditions were experimentally determined to analyze the Flavone C-glycosides homoorientin, orientin in the pretreatment ultrasonic extracts. From the results, the effect on extraction yield of variations in frequency, solvent composition and extraction time was investigated. The highest yield of Black bamboo was obtained by ultrasonic waves with a frequency of 72 KHz and an extraction time of 60 min, The extraction frequency 35 KHz ($25^{\circ}C$), time 30 min was selected as an optimal antioxidant activity condition.

• Environmental Engineering Research
• /
• v.14 no.4
• /
• pp.250-254
• /
• 2009

Contamination of microcystins, a family of heptapeptide hepatotoxins, in eutrophic water bodies is a worldwide problem. Due to their poisoning effects on animals and humans, there is a requirement to characterize and quantify all microcystins present in a sample. As microcystins are, for most part, intracellular toxins produced by some genera of cyanobacteria, lysing cyanobacterial cells to release all microcystins is considered an important step. To date, although many cell lysis methods have been used, little work has been conducted comparing the results of those different methods. In this study, various methods for cell lysis and toxin extraction from the cell lysates were investigated, including sonication, bead beating, freeze/thaw, lyophilization and lysing with TritonX-100 surfactant. It was found that lyophilization, followed by extraction with 75% methanol, was the most effective for extracting toxins from Microcystis aeruginosa cells. Another important step prior to the analysis is removing impurities and concentrating the target analyte. For these purposes, a C18 Sep-Pak solid phase extraction cartridge was used, with the percentage of the eluent methanol also evaluated. As a result, methanol percentages higher than 75% appeared to be the best eluting solvent in terms of microcystin-leucine-arginine (MC-LR) recovery efficiency for the further chromatographic and mass spectrometric analyses.

• The Korean Journal of Food And Nutrition
• /
• v.26 no.4
• /
• pp.706-712
• /
• 2013

This is the basic study on the extraction characteristics of Omija (Schizandra chinensis) for juices of Korean traditional foods. Extraction is being performed as 25 times of the solvent ratio at room temperature and at $65^{\circ}C$ with deionized water, tap water and Cheong-song mineral water which have high contents of Ca and Mg. The overall good results of the extraction conditions are calculated from the values of L (Lightness), redness (a), yellowness (b), soluble solids content, acidity, pH levels and the DPPH radical scavenging activity by using the electron donating ability (EDA). The results are as follows: 12 hours of room temperature and 6 hours at $65^{\circ}C$ were good extraction times. The Cheong-song mineral water at $65^{\circ}C$ is available for rapid extractions when compared to deionized water and tap water. A longer extraction time shows lower values of acidity but increasing values of soluble solids content and DPPH radical scavenging activity when using the electron donating ability. The best sequences for the extractions are Cheong-song mineral water followed by tap water and distilled water after overall consideration.

• The Korean Journal of Food And Nutrition
• /
• v.10 no.1
• /
• pp.31-36
• /
• 1997

This study was conducted to investigate the physiological functionality of the hot water, 70% acetone and 70% methanol extracts from the pumpkin. Extraction yield and pH of each solvent extract from various parts of pumpkin were investigated. Extraction yield from flesh were from 63.7% for 70% acetone to 68.2% for hot water. pH of 70% acetone extracts and hot water extracts were 5.01∼5.45 and 5.78∼6.22, respectively, and pH of the flesh part was the highest. The content of soluble solid was the highest in methanol extracts. Flesh part contained the highest concentration of soluble solid. Color of the extracts from fiber was higher than that of other parts. The content of the total sugar was in the decreasing order of flesh, fiber and peel. The content of total polyphenol and flavonoid from each solvent extract of peel was higher than that of other parts. Some differences were observed in physiological functionality of each solvent extracts from various parts of pumpkin. The nitrite scavenging ability of hot water extract from flesh, acetone and methanol extract from fiber and edible portion was higher than other parts. The electron donating ability was the highest in acetone and methanol extracts of peel, methanol extracts of flesh and edible portion, and acetone extracts of fiber.

• Resources Recycling
• /
• v.22 no.3
• /
• pp.91-99
• /
• 2013

Steel industry which has been accomplishes the base of our country economy, automobile and electronic industry are taking charge of the role, whose electroplating is important. Large amount of wastewater and various metal salts, including hazardous materials was generated from the electroplating pre-treatment, plating, washing and post-plating. Currently, the general wastewater follows in the environmental law and neutralization after controlling, sludge where the various metal is mixed reclaims below multiple regulative and trust it is controlling. The sludge which includes the gas price metal reclaims in the field and trust it controls. a reclamation price of land it is insufficient but and the control expense holds plentifully and it loses the gas price metal which is valuable. Consequently, The research regarding to recover a gas price metal actively from this waste water, it is advanced. A new method to recover valuable metals from electroplating wastewater synthesis of metal sulfides using topical methods utilizing iron oxidizing bacteria, reagent of sulfides and solvent extraction using an organic solvent, such as the development of the law to recover these metals and metal sulfides of wastewater using selective recovery have been studied. By using these wastewater treatment method under frequency above 95%, it has been obtained the valuable metal from the wastewater, where the metal ion of Fe, Cu, Zn and Ni complexes was mixed. As we discuss the wastewater, which has been discharged from electroplating process, it is important and will be applied to the resources of metal in the urban mine.

• Applied Biological Chemistry
• /
• v.47 no.1
• /
• pp.49-54
• /
• 2004

Biotransformation process using microorganisms was examined to improve the bioconversion rate for the production of sotolon from the raw material. First, the extraction condition was optimized with regard to solvent type and pretreatment conditions. Dichloromethane was selected as a suitable solvent for the extraction of sotolon and sotolon-related compounds. Second, various microorganisms such as lactic acid-producing bacteria, yeast and fungi were tested for the biotransformation. Among the tested microbes, Agaricus blazei showed the highest conversion rate. Additives including amino acids, salts, and organic acids were investigated to test their effects on bioconversion. When the solution was added by isoleucine, ${\alpha}-ketoglutaric\;acid$, ascorbate, and $FeSO_4$ and later incubated by culture broth containing the mycelium of Agaricus blazei, the sotolon content increased up to about 77 times as compared to that of the raw material.

• Korean Journal of Food Science and Technology
• /
• v.14 no.2
• /
• pp.174-178
• /
• 1982

Various separation methods such as solvent extraction, chemical treatment and molecular distillation were tested for the separation of tocopherols and sterols from soy oil scum. The end products of these methods were tocopherol concentrates and sterol crystals. In the solvent extraction, purity and yield of tocopherols were 21.2% and 28.3%, and those of sterols were 69.2% and 2.6%. In the chemical treatment, purity and yield of tocopherols were 11.8% and 76.4% and those of sterols were 85.1% and 34.3% respectively. In the molecular distillation, purity and yield of tocopherols were 45.0% and 68.0%, and those of sterols were 49.3% and 57.0% respectively. The end products from the methods were characterized by HPLC. Based on the results of this study, the molecular distillation method was found to be more efficient than any other method tested.

• Fisheries and Aquatic Sciences
• /
• v.18 no.2
• /
• pp.123-130
• /
• 2015

Seaweed Sargassum horneri extracts were obtained using supercritical carbon dioxide ($SC-CO_2$) and different solvents. $SC-CO_2$ was kept at a temperature of $45^{\circ}C$ and pressure of 250 bar. The flow rate of $CO_2$ (27 g/min) was constant during the entire 2-h extraction period, and ethanol was used as a cosolvent. Six different solvents [acetone, hexane, methanol, ethanol, acetone mix methanol (7:3), and hexane mix ethanol (9:1)] were used for extraction and agitated by magnetic stirring (250 rpm) in the dark at $25^{\circ}C$ for 20 h; the ratio of material to solvent was 1:10 (w/v). Antioxidant properties of S. horneri extracted using $SC-CO_2$ with ethanol and different solvents have shown good activity. The highest activity belongs to $SC-CO_2$ with ethanol extracted oil, showing DPPH, ABTS, total phenolic content, and total flavonoid levels of $68.38{\pm}1.21%$, $83.51{\pm}1.25%$, $0.64{\pm}0.02mg/g$, and $5.57{\pm}0.05mg/g$, respectively. The S. horneri extracts showed a significant correlation between the antioxidant activity and phenolic content. Based on these results, the $SC-CO_2$ extract (ethanol) of the seaweed extract from brown seaweed may be a valuable antioxidant source.