• Clean Technology
• /
• v.17 no.3
• /
• pp.225-230
• /
• 2011

Characteristics of hydrocarbon selective catalytic reduction of NOx using various noble metal catalysts were investigated. The best active metal is Pt, supports are $CeO_2$ and $TiO_2$ by strong interactions between active metals, and 55% of conversion rate of NOx is shown. Pd, Rh and Ag catalysts presented a conversion of less than 20% as active metals, and supports also showed the poor activity compared to $SiO_2$ and $ZrO_2$. Experiments were performed with different types of reducing agents, amount, concentration of oxygen and space velocity in order to investigate the performance of catalysts according to operating conditions. The results confirm that the methane is better than propane as a reducing agent, and as the ratio of methane/nitrogen oxide increases, the catalytic activity increased, as the concentration of oxygen increases and space velocity decreases, the performance of catalysts increased.

• Journal of Korean Society on Water Environment
• /
• v.39 no.4
• /
• pp.343-355
• /
• 2023

After the implementation of the total pollution load control system, the effect of improving river water quality by expanding investments in basic environmental facilities, inducing operational efficiency, and reducing the load of various pollutants was clear. However, since the implementation of the system, the management of non-point pollutants has been neglected; management focused on specific substances (biochemical oxygen demand (BOD) and total phosphorus (T-P)) and lacked specific cause analysis and action plans, failed to establish a relationship between water quality and pollution load, failed to reflect stakeholder demands for river water quality management, and failed to apply technical conditions. Therefore, to overcome the limitations raised and achieve a practical and efficient advanced total pollution system, the current system was partially improved and will continue to be improved. This study analyzed the performance and limitations of the total pollution system and introduced recent improvements and the contents that are being improved. The main contents included reducing emissions and reduction monitoring, using water quality tele-monitoring system (TMS) data and self-measurement data, adding population-inducing facilities, and adjusting regional development projects from 20 to 30 multi-family housing units, currentizing each pollutant source according to the roadmap. If the system is improved in a developmental direction and responds to various changes, it will be a more practical and effective policy.

• International Journal of Highway Engineering
• /
• v.18 no.6
• /
• pp.87-96
• /
• 2016

OBJECTIVES : A fog generated field test was conducted to analyze the relationship between different sizes of variable speed limit signs and the legibility distance under various fog density conditions. By using this study, appropriate sizes of signs can be selected depending on the density of fog. METHODS : An actual tunnel was selected as the area for this test, as other places cannot maintain the fog condition because of rapid air current. A total 121 subjects were recruited for this test, which took place over the course of four days. The test on the first day was conducted under normal weather conditions for comparison. Visibility-distance detecting sensor was used to measure the visibility distance due to the fog density time, simultaneously with the evaluation of legibility distance by subjects. RESULTS : The test results show the relationship between the different sizes of signs and the legibility distance corresponding to the visibility distance due to both non-fog and fog generated conditions. According to the technical test results, appreciable amount of reduction in legibility distance due to fog was resulted in all sizes of signs. Moreover, the legibility distance is reduced proportionately with the decrease in the visibility distance due to fog. CONCLUSIONS : The results of this study can be used to select appropriate sizes of valuable speed signs under fog conditions. Hence, drivers can expect to have more room to respond to adverse weather conditions, thereby reducing the risk of accidents.

• Journal of the Korea Institute of Building Construction
• /
• v.8 no.6
• /
• pp.131-137
• /
• 2008

In recent years, the light-weight aggregate has widely been used to reduce the weight of construction structures, and to achieve the thermal insulation of building structures. The purpose of this study is to evaluate the heat resistance of polymer concrete composites with light-weight aggregate made by binders as resin and cement with polymer dispersion. The light-weight polymer concrete composites are prepared with various conditions such as binder content, filler content, void-filling ratio, light-weight aggregate content and polymer-cement ratio, and tested for heat resistant test, and measured the weight reducing ratio, strengths and exhaustion content of gas such as CO, NO and $SO_2$. From the test results, the weight reducing ratio of light weight polymer concrete using UP binder after heat resistance test increase with an increase in the UP content irrespective of the filler content. The weight reducing ratio of polymer cement concrete is considerably smaller than that of UP concrete. In general, the strengths after heat resistance of polymer concrete composites are reduced about 40 to 65% compared with those before test. The exhausted quantity of CO, NO and $SO_2$ gases in polymer concrete composites is less than EPS(Expanded poly styrene). From the this study, it is confirmed that the many types gases discharge according to binder type of polymer concrete composites, its amount is controlled by selection of the binder type and mix proportions.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.9
• /
• pp.273-302
• /
• 1998

INTERNATIONAL MONITORY FUNDS wave swept the Economic structural insolvency lies one upon another with low growth, low trust, low prices, low interest and low employment as[2 down 3 up] phenomenons have been distinguished and low enterprise a control of structures due to forecasting 200 million unemployment, including 600 million unemployed the head of a family population have a difficulty in their life. Only way to give them hope is through the commencement of an enterprises to have 2nd career development. But end of 1995, 467,00 dining out companies have been established and recently business are in depression. There are many business conditions of change of business or reduce operations, if unemployment populations of 5%, 100,000 peoples doing the commencement of an enterprises, enormous number of dining out companies will be increased and the competition will be fierce, especially those who have short knowledge and experience doing the commencement of an enterprises have high failure than success which will give a problems to society. Our study is to make the commencement of an enterprise to reducing the faiure and to be successful for main point to successful commencement of an enterprise, the established can self capability and mental condition, the main important factor is types of industry selection, successful and those established who takes this conditions will very carefully inspect various matters by scientifically and rationally mind industrys propulsion graphs and open official fixture graphs will framing detail factors. One by inspect the reduction of failure, and successful commencement of an enterproses mind industry have been studied.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.4
• /
• pp.680-683
• /
• 2002

Bovine aortic endothelial cells(BAEC) produce two variant forms of laminin with a subunit composition of AB1B2 and A'B1B2. Analyses of the intracellular assembly of these subunits revealed that the B1B2 dimer formed first, and that A or A' joined to form the AB1B2 or A'B1B2 trimer. Angiostatic steroids shifted the relative size of the A and A' monomer pool in BAEC, and competition between the A and A' subunits in joining the B1B2 dimer produced AB1B2 and A'B1B2 in different ratios. This result suggests that subunit replacement is the general mechanism for producing laminin variants by various cells for tissue morphogenesis. When laminin subunits in BAEC were cross-linked with dithio-bis-succinimidylpropionate(DSP) and immunoprecipitated with anti-Iaminin antiserum, monomeric A,A',B1 and B2 monomers and the B1B2 dimer migrated as extremely large molecules in sodium dodecyl sulfate gel electrophoresis under nonreducing conditions. When the crosslinking disulfide bonds were cleaved under reducing conditions, they migrated as the usual subunits. This result suggests that molecular chaperones were involved in the process of the assembly and replacement of laminin subunits.

• Safety and Health at Work
• /
• v.7 no.3
• /
• pp.175-184
• /
• 2016

Stress at work and in the family is a very common issue in our society that generates many health-related problems. During recent years, numerous studies have sought to define the term stress, raising many contradictions that various authors have studied. Other authors have attempted to establish some criteria, in subjective and not very quantitative ways, in an attempt to reduce and even to eliminate stressors and their effects at work and in the family context. The purpose of this study was to quantify so-called cushioning variables, such as control, social support, home/work life conciliation, and even sports and leisure activities, with the purpose of, as much as possible, reducing the negative effects of stress, which seriously affects the health of workers. The study employs data from the Fifth European Working Conditions Survey, in which nearly 44,000 interviewees from 34 countries in the European Union participated. We constructed a probabilistic model based on a Bayesian network, using variables from both the workplace and the family, the aforementioned cushioning variables, as well as the variable stress. If action is taken on the above variables, then the probabilities of suffering high levels of stress may be reduced. Such action may improve the quality of life of people at work and in the family.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.1 no.1
• /
• pp.56-61
• /
• 2001

Activated sludge processes are broadly used in the biological wastewater treatment processes. The activated sludge processes are complex systems because of the many factors such as the variation of influent flowrate and ingredients, the complexity of biological reactions, and the various operation conditions. The main motivation o this research is to develop an intelligent control strategy for activated sludge process (ASP). ASP is a complex and nonlinear dynamic system owing to the characteristic of wastewater, the change in influent flowrate, weather conditions, and so on. The mathematical model of ASP also includes the uncertainty which is a ignored or unconsidered factor from process designers. The ASP model based on Matlabⓡ/Simulinkⓡ is developed in this paper. And the model performance is examined by IWA (International Water Association) and COST (European Cooperation in the filed of Scientific and Technical Research) data. The model tests derive steady-state results of 14 days. In this paper, fuzzy logic control approach is applied to handle DO concentrations. The fuzzy logic controller includes two inputs and one output to adjust air flowrate. The objective function for the optimization, in the implemented evolutionary strategy, is formed with focusing on improving the effluent quality and reducing the operating cost.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.8
• /
• pp.50-55
• /
• 2020

This study investigates the injection molding of a plastic rack gear and focuses on deflections in the part. The causes of deflections were found and resolved through a trade-off study by injection molding analysis. Based on a warpage analysis, the fiber orientation was found to be a dominant factor in the occurrence of deflections. Changes in the part design and various injection conditions were analyzed for their effects in reducing deflections. Based on the trade-off study, a new part bottom design, injection time, and melt temperature were recommended. A trial injection was done for the new plastic rack gear, and measurements showed that its flatness surpassed that of the original part and met the specified requirement. The short injection time, low melt temperature, and symmetric similar configuration of the part contributed to the reduction in deflections. Therefore, optimized gate design and injection conditions as well as a new part design were validated through injection molding analysis in this study.

• Plant Journal
• /
• v.7 no.2
• /
• pp.44-51
• /
• 2011

Given the fact that the entire bituminous coal used for a boiler is imported, the supply of coal is often affected by the rise of international coal price. Moreover, coal suppliers have been diversified due to the competition among power generation companies for reducing costs and inexpensive sub-bituminous coal is used. As a result, boilers combustion conditions have been deviated from the initial boiler design. This requires the selection of adequate excessive air ratio for different combustion conditions to enhance the efficiency of boiler operation. The boiler efficiency has been identified through an examination on the change of excessive air ratio by mixed fuel in unit 8 of Dangjin power plant complex. In addition, an excessive air ratio was calculated based on the examination result. According to the study result, the adequate excessive air ratio was 13% when Macquarie and Powder river were mixed at a ratio of 5:5 and when Sonoma and Megaprima persada were mixed at a ratio of 5:5. When BHP Billiton and Powder river were mixed at a ratio of 4:6 and Centennial and Batubara were mixed at a ratio of 3:7, the adequate excessive air ratio was 11%.