• Carbon letters
• /
• 제1권1호
• /
• pp.17-21
• /
• 2000

Catalytic reduction and oxidation of NO over polyacrylonitrile based activated carbon fibers (PAN-ACF) under various conditions were carried out to develop removal process of NO from the flue gas. The effect of temperature, oxygen concentration and the moisture content for the reduction of NO with ammonia as a reducing agent was investigated. The reduction of NO increased with the oxygen concentration, but decreased with the increased temperature. The moisture content in the flue gas affects the reduction of NO as the inhibition of the adsorption of the other components and the reaction on the surface of ACE For the oxidation of NO to $NO_2$ over PAN-ACF without using a reducing gas, it showed the temperature and the oxygen concentration of the flue gas are the important factors for the NO conversion in which the conversion increased with oxygen concentration and decreased with the temperature increase and might be the alternative option for the selective catalytic reduction process.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.739-740
• /
• 2010

1단용 액체로켓엔진 후류 때문에 발생하는 유도로의 열적 부하를 감소시키기 위한 방법 중 물분사 방식의 효과적인 냉각 성능을 고찰하기 위해 두 가지 방법과 다양한 물분사 조건에 대해 수치적 계산을 수행하였다. 중앙분사 방식이 측면분사 방식보다 보다 효과적으로 후류를 냉각시켜 유도로의 열적부하를 감소시킴을 알 수 있었다.

• 한국건설순환자원학회논문집
• /
• 제5권4호
• /
• pp.353-358
• /
• 2017

본 연구의 목적은 고성능 시멘트계열 재료의 점성을 감소시키는 것에 대한 기초적인 정보를 제공하는 것이다. 레올로지적 측면에서 시멘트 계열 재료의 유동성을 결정하는 것은 항복응력과 소성점도이다. 물결합재비가 낮고 분체비율이 높은 고성능 시멘트계열 재료의 경우, 고성능 감수제로는 항복응력을 줄일 수는 있으나 점성을 낮추는 것이 어렵다. 따라서 이 연구에서는 시멘트계열 재료의 소성점도를 줄이기 위한 목적으로 두가지 방법, 즉, 분말상태의 적절한 조합 및 저점도형 고성능 감수제의 사용을 제시하였다. 첫째, 다양한 산업부산물을 치환하여 석탄재 원분과 폐석회석 분말이 점성저하에 효과가 있음을 밝혔으며 저점도형 고성능 감수제가 일반형 고성능 감수제에 비해 시멘트 페이스트의 점도를 낮추는 것을 확인하였다. 따라서 본 연구의 결과를 바탕으로 다양한 방법의 시멘트계열 재료의 점도를 낮추는 기초적인 방법을 제공할 것으로 기대한다.

• 한국치위생학회지
• /
• 제20권3호
• /
• pp.281-290
• /
• 2020

Objectives: Stress is the cause of several illnesses, in older people, stress may also cause various social problems. The oral health of older adults is closely related to the quality of life, and chewing ability is particularly important for their general health. The purpose of this study was to investigate the relationship between stress, the number of teeth remaining, and the chewing ability, which reflects the oral health status among older adults. Methods: This study evaluated the stress level and chewing ability of adults older than 65 years using the 6th (2014-2015) Korea National Health and Nutrition Examination data. The total number of remaining teeth was determined based on the data of the teeth conditions. Results: There was an association between stress and chewing ability among older adults. The odds ratio of chewing function increased by 2.67 times (crude OR=2.67; 95% CI=1.88-3.79) with increased stress. After adjusting, the odds ratio increased to 2.74 times (adjusted OR=2.74; 95% CI=1.88-3.98). Conclusions: Reducing stress may facilitate effective oral health management and improve the overall quality of life in older adults. The findings of this study may help in the discovery of various approaches s to reducing stress in older adults and provide relevant information for oral health education.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.328-328
• /
• 2017

Drought is a major limiting factor that reduces rice production and occurs often especially under recent climate change. Plants have the ability to alter their developmental morphology in response to changing environment, which is known as phenotypic plasticity. In our previous studies, we found that one chromosome segment substitution line (CSSL50 derived from Nipponbare and Kasalath crosses) showed no differences in shoot and root growth as compared with the recurrent genotype, Nipponbare under non-stress condition but showed greater growth responses compared with Nipponbare under mild drought stress condition. We hypothesized that reducing root respiration as metabolic cost, which may be largely a consequence of aerenchyma formation would be one of the key mechanisms for root plasticity expression. This study aimed to evaluate the root respiration and aerenchyma formation under various soil moisture conditions among genotypes with different root plasticity. CSSL50 together with Nipponbare and Kasalath were grown under waterlogged conditions (Control) and mild drought stress conditions (20% of soil moisture content) in a plastic pot ($11cm{\times}14cm$, ${\varphi}{\times}H$) and PVC tube ($3cm{\times}30cm$, ${\varphi}{\times}H$). Root respiration rate was measured with infrared gas analyzer (IRGA, GMP343, Vaisala, Finland) with a closed static chamber system. There was no significant difference between genotypes in control for shoot and root growth as well as root respiration rate. In contrast, all the genotypes increased their root respiration rates in response to mild drought stress. However, CSSL50 showed lower root respiration rate than Nipponbare, which was associated by higher root aerenchyma formation that was estimated based on internal gas space (porosity) under mild drought stress conditions. Furthermore, there were significant negative correlations between root length and root respiration rate. These results imply that reducing the metabolic cost (= root respiration rate) is a key mechanism for root plasticity expression, which CSSL50 showed under mild drought.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2005년도 제31회 KOSCO SYMPOSIUM 논문집
• /
• pp.104-109
• /
• 2005

This paper describes the effect of the split injection on combustion and emission characteristics in a common rail diesel engine at various operating conditions. The combustion pressures and exhaust emissions such as $NO_x$ and soot were measured at various split injection timings. The experimental apparatus of this study is composed of 4 cylinder engine installed with piezoelectric pressure sensor, EC dynamometer, and exhaust gas analyzer for the measurement of $NO_x$, CO, HC and soot emissions. Results show that the split injection has a great effect on reducing the rapid premixed combustion and $NO_x$ emissions.

• Bulletin of the Korean Chemical Society
• /
• 제34권6호
• /
• pp.1741-1744
• /
• 2013

A new polymeric catalyst was prepared by supporting $GaCl_3$ on cross-linked polyvinylpyrrolidone ($GaCl_3$/PVP). This catalyst was employed for efficient and regioselective ring-opening reaction of epoxides by various alcohols under solvent-free conditions at room temperature. In our procedure, this heterogeneous catalyst was used at neutral and mild reaction conditions to afford high yields of ${\beta}$-alkoxy alcohols. Also, regioselective conversion of epoxides to ${\beta}$-azidohydrines was accomplished by sodium azide in MeOH in the presence of $GaCl_3$/PVP at room temperature. $GaCl_3$/PVP is a non-hygroscopic and recoverable catalyst and is easily separated from reaction mixture by a simple filtration and re-used repeatedly. Also, this catalyst has good handling and can be stored for long time without any reducing of its reactivity.

• 산업경영시스템학회지
• /
• 제35권2호
• /
• pp.196-203
• /
• 2012

When manufacturing die casting mold, generally, the casting layout design should be considered based on the relation between injection system, casting condition, gate system, and cooling system. Also, the extent or the location of product defects were differentiated according to the various relations of the above conditions. High-qualified products can be manufactured as those defects are controled by the proper modifications or the changes of die casting mold with the conditions. In this research, the proper manufacturing method was derived intensively for reducing the defect of the internal porosity of steering wheel housing which is very complicated to achieve a good mold design. The method was also derived for minimizing and for guaranteeing the product quality through the analysis of the casting problem and the deduction of alternative plans.

• 대한전기학회논문지
• /
• 제45권1호
• /
• pp.54-59
• /
• 1996

As the current shape of SRM is of pulse type and changed by the motor parameters and drive conditions, the influences on the drive efficiency by control method are more than other types of motors. In this paper, a proper excitation condition to drive a SRM with high efficiency is proposed and tested. It is derived from the conditions that the phase current of a SRM is to be flat-topped at various drive. The saturation effect of magnetic circuit is accounted for more accurate analysis. Experimental tests are executed to verify the proposed excitation method. This drive system is easy to commutate and also advantageous in reducing torque ripple. (author). 6 refs., 10 figs., 1 tab.

• Journal of Welding and Joining
• /
• 제27권5호
• /
• pp.55-61
• /
• 2009

Pure titanium and its alloys have good formability, excellent corrosion resistance and high strength to weight ratios. Therefore, it has been using to heat exchangers, offshore plants, sports equipments, and etc. As broad as its application fields, it also increases welding locations. Conventional GTAW and GMAW are very popular welding methods of titanium, but it has a high heat input and wide HAZ. It has a possibility of inducing Stress Corrosion Cracking. So, laser welding method has been using to get reliable welds by reducing heat input. Weld beads change its color to silver, gold, brown, blue, and gray by shied conditions. And the closer to gray, the more oxidize, nitride and embrittlement. The most effective atom to embrittlement was nitrogen. And shield gas flow was not so effective over the constant flow rates. In this study, weld properties of the pure titanium were investigated by pulsed & CW Nd:YAG lasers and evaluated by various shield conditions. And It is observed that nitrogen is more effective to oxidation and embrittlement of titanium compared with oxygen by oxygen and nitrogen quantitative analysis.