• Textile Coloration and Finishing
• /
• v.22 no.1
• /
• pp.61-70
• /
• 2010

This effects of drawing conditions on the physical properties of the drawn worsted yarns were investigated. The drawn worsted yarns were made on the yarn drawing system with various drawing conditions such as concentration of reducing agent, draw ratio, setting time of drawn yarn and concentration of oxidizing agent. The dry and wet shrinkage, irregularity(CV%), thin and thick part, hairiness and abrasion resistance of these various specimens were measured and discussed in terms of various drawing conditions.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.4
• /
• pp.1-6
• /
• 2016

In this article, the recent developments in electroless plating of copper, electroless bath formulation and effect of plating parameters have been reviewed. Cyanide free electroless baths are now being developed and studied due to the various environmental concerns. Various organic chemicals such as complexing agents, reducing agents, and additives such as poly-alcohols and aromatic ring compounds have been added to copper plating baths for promising results. The effects of various reducing and complexing agents, bath conditions like additives, bath pH, and composition have been summarized. Finally the applications of the electroless plating of copper and latest developments have been overviewed for further guidance in this field.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.3
• /
• pp.41-52
• /
• 2020

This paper investigates the stress-reducing preventive maintenance model through numerical experiments. The preventive maintenance model is used to analyze the relationship between related conditions and variables to gain insight into the efficient operation of the system when performing preventive maintenance in real-world situations. Various preventive maintenance models have been developed over the past decades and their complexity has increased in recent years. Increasing complexity is essential to reflect reality, but recent models can only be interpreted through numerical experiments. The stress-reducing preventive maintenance is a newly introduced preventive maintenance concept and can only be interpreted numerically due to its complexity, and has received little attention because the concept is unfamiliar. Therefore, for information purposes, this paper investigates the characteristics of the stress-reducing preventive maintenance and the relationship between parameters and variables through numerical experiments. In particular, this paper is focusing on the economic feasibility of stress-reducing preventive maintenance by observing changes in the optimal preventive maintenance period in response to changes in environmental stress and the improvement factor. As a result, when either the environmental stress or the improve effect of stress-reducing preventive maintenance is low, it is not necessary to carry out the stress-reducing preventive maintenance at excessive cost. In addition, it was found that the age reduction model is more economical than the failure rate reduction model.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.1
• /
• pp.52-59
• /
• 2005

The study was targeted to saccharify foodwastes with the cellulolytic and amylolytic enzymes obtained from culture supernatant of Trichoderma harzianum FJ1 and analyze the kinetics of the saccharification in order to enlarge the utilization in industrial application. T. harzianum FJ1 highly produced various cellulolytic (filter paperase 0.9, carboxymethyl cellulase 22.0, ${\beta}$-glucosidase 1.2, Avicelase 0.4, xylanase 30.8, as U/mL-supernatant) and amylolytic (${alpha}$-amylase 5.6, ${\beta}$-amylase 3.1, glucoamylase 2.6, as U/mL-supernatant) enzymes. The $23{\sim}98\;g/L$ of reducing sugars were obtained under various experimental conditions by changing FPase to between $0.2{\sim}0.6\;U/mL$ and foodwastes between $5{\sim}20\%$ (w/v), with fixed conditions at $50^{\circ}C$, pH 5.0, and 100 rpm for 24 h. As the enzymatic hydrolysis of foodwastes were performed in a heterogeneous solid-liquid reaction system, it was significantly influenced by enzyme and substrate concentrations used, where the pH and temperature were fixed at their experimental optima of 5.0 and $50^{\circ}C$, respectively. An empirical model was employed to simplify the kinetics of the saccharification reaction. The reducing sugars concentration (X, g/L) in the saccharification reaction was expressed by a power curve ($X=K{\cdot}t^n$) for the reaction time (t), where the coefficient, K and n. were related to functions of the enzymes concentrations (E) and foodwastes concentrations (S), as follow: $K=10.894{\cdot}Ln(E{\cdot}S^2)-56.768,\;n=0.0608{\cdot}(E/S)^{-0.2130}$. The kinetic developed to analyze the effective saccharification of foodwastes composed of complex organic compounds could adequately explain the cases under various saccharification conditions. The kinetics results would be available for reducing sugars production processes, with the reducing sugars obtained at a lower cost can be used as carbon and energy sources in various fermentation industries.

• Applied Chemistry for Engineering
• /
• v.29 no.1
• /
• pp.77-80
• /
• 2018

Silver nanoparticles with various sizes were synthesized using ionic liquids. In order to conduct more efficient research, experimental methods and results were analyzed statistically. First, effects of five different parameters including the reaction time, temperature, NaOH concentration, reducing agent and ionic liquid amount on the size of silver particles were investigated. As a result, the effects of time and temperature were negligible. The experimental conditions for the other three factors were then statistically constructed. From XRD analyses, the particles synthesized under all conditions had a pure silver crystal structure. Sizes of the synthesized silver particles were also analyzed by HR-SEM. In the three synthetic conditions, NaOH concentration had the greatest influence on determining the size of silver particles and the reducing agent concentration was relatively minute. Synthesis conditions of silver particles with various sizes were presented by using statistical methods with respect to NaOH and ionic liquids. In addition, the sizes of silver particles according to three experimental conditions were derived by the mixture method.

• Corrosion Science and Technology
• /
• v.17 no.4
• /
• pp.147-153
• /
• 2018

Copper is used in various applications in environments favoring and enabling formation of biofilms by naturally occurring microbes. Copper is also the chosen corrosion barrier for nuclear waste in Finland. The copper canisters should have lifetimes of 100,000 years. Copper is commonly considered to be resistant to corrosion in oxygen-free water. This is an important argument for using copper as a corrosion protection in the planned canisters for spent nuclear-fuel encapsulation. However, microbial biofilm formation on metal surfaces can increase corrosion in various conditions and provide conditions where corrosion would not otherwise occur. Microbes can alter pH and redox potential, excrete corrosion-inducing metabolites, directly or indirectly reduce or oxidize the corrosion products, and form biofilms that create corrosive microenvironments. Microbial metabolites are known to initiate, facilitate, or accelerate general or localized corrosion, galvanic corrosion, and intergranular corrosion, as well as enable stress-corrosion cracking. Sulfate-reducing bacteria (SRB) are present in the repository environment. Sulfide is known to be a corrosive agent for copper. Here we show results from corrosion of copper in anoxic simulated ground water in the presence of SRB enriched from the planned disposal site.

• Journal of the Korean Data and Information Science Society
• /
• v.22 no.1
• /
• pp.125-136
• /
• 2011

Ground-level ozone, an air pollutant that is monitored by the Environmental Protection Agency (EPA), damages human health by irritating the respiratory system, reducing lung function, damaging lung cells, and aggravating asthma and other chronic conditions. In March 2008, the EPA strengthened ozone standards by lowering acceptable limits from 84 parts per billion to 75 parts per billion. Here epidemiologic data is used to study the effects of ozone regulation on human health and assessed how various regulatory standards for ozone may affect nonaccidental mortality, including respiratory-related deaths during ozone season. The assessment uses statistical methods based on hierarchical Bayesian models to predict the potential effects of the different regulatory standards. It also analyzes the variability of the results and ho they are impacted by different modeling assumptions. We focused on the technical an statistical approach to assessing relationship between new ozone regulations and mortality while other researches have detailed the relationship between ozone and human mortality. We shows a statistical correlation between ozone regulations and mortality, with lower limits of acceptable ozone linked to a decrease in deaths, and projects that mortality is expected to decrease by reducing ozone regulatory standards.

• Advances in concrete construction
• /
• v.14 no.2
• /
• pp.139-151
• /
• 2022

Filling materials poured into precast member joint are subjected to restraint stress by the precast member and joint reinforcement. The induced stress will likely cause cracks at early ages and performance degradation of the entire structure. To prevent these issues and design reasonable joints, it is very important to analyze and evaluate the restrained shrinkage cracks of filling materials at various restraint conditions. In this study, a new time zero-that defines the shrinkage development time of a filling material-is proposed to calculate the accurate amount of shrinkage. The tensile stresses and strengths at different ages were compared through the ring test (AASHTO PP34) to evaluate the crack potential of the restrained filling materials at various restraint conditions. The mixture which contained an expansive additive and a shrinkage reducing agent exhibited high resistance to shrinkage cracking owing to the high-drying shrinkage compensation effect. The high-performance, fiber-reinforced cement composite, and ultra-high-performance, fiber-reinforced cement composite yielded very high resistance to shrinkage and cracking owing to the pull-out property of steel fibers. To this end, multiple nonlinear regression analyses were conducted based on the test results. Accordingly, a modified tensile stress equation that considered both the geometric shape of the specimen and the intrinsic properties of the material is proposed.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.429-435
• /
• 2015

This study proposes a re-adhesion algorithm that has stable traction effort for rolling stock slip/slide minimization when deliverable traction decreases by slip. The proposed scheme estimates appropriate reference speed using two encoders for reducing slip and controls traction effort stably and has stable control characteristics for disturbance. The algorithm which uses the maximum adhesive effort by instantaneous estimation of adhesion force stably controls traction effort and gives rolling stock excellent acceleration and deceleration characteristics. And a slip sensing element that can quickly detect slip is used. Load motor and inverter were checked in various slip conditions for creating various line conditions.

• Journal of the Korean Society of Industry Convergence
• /
• v.17 no.3
• /
• pp.184-193
• /
• 2014

Machine vision systems is applied for various industries such as optimize your spending, automate your production and maximize your efficiency. This research is effective for most optimal light condition of machine vision that technology was applied bald outside human visual acuity. Image processing converts a target image captured by a CCD camera into a digital signal and then performs various arithmetic operations on the signal to extract the characteristics of the target, such as points, lines, circles, area and length. The mathematical concepts of convolution and the kernel matrix are used to apply filters to signals, to perform functions such as extracting edges and reducing unwanted noise. This research analyze and compares matching ratio with reference image and search for optimal lighting condition in accuracy that user wants coming input image according to brightness change of lighting.