• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.19.2-19.2
• /
• 2010

Printed electronics using printing process has broadened in all respects such as electrics (lighting, batteries, solar cells etc) as well as electronics (OLED, LCD, E-paper, transistor etc). Copper is considered to be a promising alternative to silver for printed electronics, due to very high conductivity at a low price. However, Copper is easily oxidized, and its oxide is non-conductive. This is the highest hurdle for making copper inks, since the heat and humidity that occurs during ink making and printing simply accelerates the oxidation process. A variety of chemical treatments including organic capping agents and metallic coating have been used to slow this oxidation. We have established synthetic conditions of copper nanoparticles (CuNPs) which are resistant to oxidation and average diameter of 20 to 50nm. Specific resistivity should be less than $4\;{\mu}{\Omega}{\cdot}cm$ when sintered at lower temperature than $250^{\circ}C$ to be able to apply to conductive patterns of FPCBs using ink-jet printing. Through this study, the parameters to control average diameter of CuNPs were found to be the introduction of additive agent, the feeding rate of reducing agent, and reaction temperature. The CuNPs with various average diameters (58, 40, 26, 20nm) could be synthesized by controlling these parameters. The dispersed solution of CuNPs with an average size of 20 nm was made with nonpolar solvent containing 3 wt% of binder, and then coated onto glass substrate. After sintering the coated substrates at $250^{\circ}C$ for 30 minutes in nitrogen atmosphere, metallic copper film resulted in a specific resistivity of $4.2\;{\mu}{\Omega}{\cdot}cm$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.453-458
• /
• 2016

One of the most common applications of machine vision is quality inspections in automated production. In this study, a welding inspection system that is controlled by a PC and a PLC equipped with a multi-camera setup was developed. The system was designed to measure the primary dimensions, such as the length and width of the welding areas. The TCP/IP protocols and multi-threading techniques were used for parallel control of the optical components and physical distribution. A coaxial light was used to maintain uniform lighting conditions and enhance the image quality of the weld areas. The core image processing system was established through a combination of various algorithms from the OpenCV library. The proposed vision inspection system was fully validated for an actual weld production line and was shown to satisfy the functional and performance requirements.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.2
• /
• pp.318-328
• /
• 2014

In this paper, as a way of performance improvement of business card recognition in the mobile environment, we suggested a hybrid OCR agent which combines data using a parallel processing sequence between various algorithms and different kinds of business card recognition engines which have learning data. We also suggested an Image Processing Method on mobile cameras which adapts to the changes of the lighting, exposing axis and the backgrounds of the cards which occur depending on the photographic conditions. In case a hybrid OCR agent is composed by the method suggested above, the average recognition rate of Korean business cards has improved from 90.69% to 95.5% compared to the cases where a single engine is used. By using the Image Processing Method, the image capacity has decreased to the average of 50%, and the recognition has improved from 83% to 92.48% showing 9.4% improvement.

• Human Ecology Research
• /
• v.59 no.1
• /
• pp.83-97
• /
• 2021

This study developed safety clothing that is essential for adolescent to protect their bodies from accidents, pursue activities and individuality. Therefore, the developed safety clothing was first based on international standards, while changing design to emphasize creativity, activity, and functionality. Two suits of boy's clothes and a girl's suit were developed as safety clothing for sportswear, along with two pairs of girl's clothes and a pair of boy's clothes for entertainment. It was confirmed that the difference in visibility was revealed by testing under different lighting conditions. Second, the survey on adolescents indicated no significant gender difference in sportswear. Round shirt+shorts for both boys and girls were the most preferred for ball game sportswear. However, there was a significant difference by gender in the design of safety clothing for entertainment. Male students preferred jump suit=cape+pants the most, and female students preferred jump suit>cape+pants in the order (p<0.05). In the safety clothes with the highest preference for entertainment, there was no gender difference. All students preferred the jump suit at the most. Checking at each school level, it was found that both middle and high school students preferred jump suit designs, and in safety clothing, middle school students preferred high-neck shirt blouse+tight skirt, and high school students preferred jump suits. Third, 35.5% responded that they would wear it more if current safety clothing is improved. This indicated the necessity of developing various safety clothing for adolescence.

• Journal of Advanced Information Technology and Convergence
• /
• v.10 no.1
• /
• pp.71-83
• /
• 2020

In this paper, we propose a system that can detect the shape of a hand at high speed using an FPGA. The hand-shape detection system is designed using Verilog HDL, a hardware language that can process in parallel instead of sequentially running C++ because real-time processing is important. There are several methods for hand gesture recognition, but the image processing method is used. Since the human eye is sensitive to brightness, the YCbCr color model was selected among various color expression methods to obtain a result that is less affected by lighting. For the CbCr elements, only the components corresponding to the skin color are filtered out from the input image by utilizing the restriction conditions. In order to increase the speed of object recognition, a median filter that removes noise present in the input image is used, and this filter is designed to allow comparison of values and extraction of intermediate values at the same time to reduce the amount of computation. For parallel processing, it is designed to locate the centerline of the hand during scanning and sorting the stored data. The line with the highest count is selected as the center line of the hand, and the size of the hand is determined based on the count, and the hand and arm parts are separated. The designed hardware circuit satisfied the target operating frequency and the number of gates.

• Journal of Environmental Science International
• /
• v.33 no.8
• /
• pp.575-581
• /
• 2024

Insect pests are a significant threat to stored crops and can lead to considerable economic losses and reduced crop quality. Traditional pest control methods often involve chemical treatments, which have adverse environmental and health effects. This study evaluated the effectiveness of controlling the environment using LED lighting and plant-derived odor barriers as a dual strategy for insect pest control. The storage environment was altered using LED lights that emitted specific wavelengths (580-585 nm) and by reducing other wavelengths (300-500 nm). This light environment was combined with an insect odor barrier derived from Cinnamomum verum, Illicium verum, and Artemisia annua, and their duel impact on the behavior and frequency of insect pests under real storage conditions was determined. The findings revealed significant changes in the frequencies of various insect orders, indicating differential responses to light wavelengths and odor barriers. Notably, the introduction of an anti-insect light and odor barrier environment reduced Diptera and Hemiptera frequencies, which could potentially reduce pest intrusion. The results underscore the potential use of integrated light and odor barriers as a noninvasive and environmentally friendly approach to pest management. This study identifies the specific wavelengths and odor combinations that effectively deter insect pests and contribute to the development of more efficient and sustainable pest control methods. It also highlights the importance of understanding insect behavior and frequency changes in response to novel deterrent strategies.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.3
• /
• pp.99-108
• /
• 2021

There are unrestricted conditions on the driver's face inside the vehicle, such as changes in lighting, partial occlusion and various changes in the driver's condition. In this paper, we propose a face identification system in an unrestricted vehicle environment. The proposed method uses a near-infrared (NIR) camera to minimize the changes in facial images that occur according to the illumination changes inside and outside the vehicle. In order to process a face exposed to extreme light, the normal face image is changed to a simulated overexposed image using mean and variance for training. Thus, facial classifiers are simultaneously generated under both normal and extreme illumination conditions. Our method identifies a face by detecting facial landmarks and aggregating the confidence score of each landmark for the final decision. In particular, the performance improvement is the highest in the class where the driver wears glasses or sunglasses, owing to the robustness to partial occlusions by recognizing each landmark. We can recognize the driver by using the scores of remaining visible landmarks. We also propose a novel robust rejection and a new evaluation method, which considers the relations between registered and unregistered drivers. The experimental results on our dataset, PolyU and ORL datasets demonstrate the effectiveness of the proposed method.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.8
• /
• pp.65-75
• /
• 2013

This paper proposes a method of tracking the hand region and detecting the fingertip using only depth images. In order to eliminate the influence of lighting conditions and obtain information quickly and stably, this paper proposes a tracking method that relies only on depth information, as well as a method of using region growing to identify errors that can occur during the tracking process and a method of detecting the fingertip that can be applied for the recognition of various gestures. First, the closest point of approach is identified through the process of transferring the center point in order to locate the tracking point, and the region is grown from that point to detect the hand region and boundary line. Next, the ratio of the invalid boundary, obtained by means of region growing, is used to calculate the validity of the tracking region and thereby judge whether the tracking is normal. If tracking is normal, the contour line is extracted from the detected hand region and the curvature and RANSAC and Convex-Hull are used to detect the fingertip. Lastly, quantitative and qualitative analyses are performed to verify the performance in various situations and prove the efficiency of the proposed algorithm for tracking and detecting the fingertip.

• Journal of the Korean Chemical Society
• /
• v.48 no.4
• /
• pp.371-378
• /
• 2004

The $SrGa_2S_4:Eu^{2+}$ green emitting phosphor has been studied as a luminous device for CRT (Cathode Ray Tube) or FED (Field Emission Display) and EL (Electroluminescence). This phosphor, also, is under noticed for LED (Lighting Emitting Diode) phosphor, which makes use of excitation characteristics of long wavelength region. The $SrGa_2S_4:Eu^{2+}$ phosphor was prepared generally conventional synthesis method using flux. However, this method needs high heat-treated temperature, long reaction time, complex process and harmful $H_2S$or $CS_2$ gas. In this works, therefore, we have synthesized $SrGa_2S_4:Eu^{2+}$ using SrS, $Ga_2S_3$, and EuS as starting materials, and the mixture gas of 5% H2/95% N2 was used to avoid the $H_2S$or $CS_2$. We investigated the luminescence characteristic of $SrGa_2S_4:Eu^{2+}$ phosphor prepared in various synthesis conditions, performed post-treatment and sieving process for application to LED.

• Journal of the Korean Society of School Health
• /
• v.6 no.2
• /
• pp.24-55
• /
• 1993

School health aims to guide and manage growing students from elementary schools to high schools in order to grow healthily through the formation of healthy life habits, the self-control health management guide and the making of pleasant school health environments. Even though this school health plays an important role in guiding the students who are in the period of growing to have a perfect personality as a democratic people of our country in the school education, there are many lacks, such as they still don't know the word itself, "school health" or recognize its importance. Also it's a real condition to practice items concerned with the health under the condition of unestablished structure. 1. The results of analyzing school health real conditions. Based on treatises concerned with school health and various statistical materials which are announced by concerned people. We divided and analyzed school health into the items concerned with health education, the items with health management, and the items with school health environments, and investigated the level of the present school health and its necessity. As the items concerned with health education, we investigated the necessary range of school health education, the effect of health education on children's daily life, family's health and the interesting contents of school health. And as the items with health management, I investigated children's obesity, dental caries, eyesight, clinics, a health examination, drug abuse, spirit health, providing meals for school children, and school health manpower. And as the items conerned with school health environments, we investigated the recognition of the problem of natural environments, the management of purification district around the school, the problem of environments within the school and classroom lighting. As the results of analyzing these, I realized that the present level of school health is still in unsatisfactory situation and school health is needed necessary. 2. The establishment of school health. In order to set the school health, above all, the management system of School health should be set. I classified and systemized the contents of each item which had been promoted till now according to the function. They are classified as followings Based on classifying school health into (1) health education, (2) health management and (3) health environments, I divided school health education into the health education of health subjects, the health education of concerned subjects and the education of health life. And I divided health management into the health managements for a prevention and a cure. And I divided health environments into the environment around the school and within the school. Each system set like these is not fixed invariably and I should keep the relationship of mutual supplement between health education and health management, between health management and health environments, and between health environments management and health education. When we run these systemetic school health, students' health could be maintained and improved to more proper directions.