• Macromolecular Research
• /
• v.17 no.11
• /
• pp.901-906
• /
• 2009

Several aromatic optically active polyamides (PA)s were synthesized from 5-(2-phthalimidiylpropanoylamino)isophthalic acid with various aromatic diamines via direct polycondensation with triphenyl phosphite and pyridine in the presence of calcium chloride and N-methyl-2-pyrrolidone under microwave irradiation and conventional heating conditions. Under the optimized conditions, the reaction mixture was irradiated for 2 min. with a 100% irradiation power (900 W). The resulting polymers were obtained in high yield and moderate inherent viscosity ranging from 0.35 to 0.60 dL/g. All synthesized polymers showed excellent solubility in amide-type solvents. Thermogravimetric analysis revealed a 10% weight loss temperature and char yield at $600^{\circ}C$ in a nitrogen atmosphere of > $350^{\circ}C$ and > 58%, respectively, which suggests that the resulting PAs have good thermal stability.

• Korean Chemical Engineering Research
• /
• v.57 no.2
• /
• pp.301-304
• /
• 2019

Microwave was designed for lipid extraction from green algae (Spirulina platensis). Microalgae-solvent (various solvents) were extracted and heated using microwave at 600 W for around 40 min. The maximum yield obtained within this period was 12.530% of lipid compared to just 1.293% for Soxhlet extraction. Lipid analysis revealed that those with higher essential fatty acid content consist of saturated fatty acid (SAFA) and polyunsaturated fatty acid (PUFA) which could be used for biodiesel production.

• Natural Product Sciences
• /
• v.25 no.2
• /
• pp.150-156
• /
• 2019

Conventional extraction of oil and azadirachtin, a botanical insecticide, from Azadirachta indica involves defatting the seeds and leaves using hexane followed by azadirachtin extraction with a polar solvent. In order to simplify the process while maintaining the yield we explored a binary extraction approach using Soxhlet extraction device and hexane and ethanol as non-polar and polar solvents at various ratios and extraction times. The highest oil and azadirachtin yields were obtained at 6 h extraction time using a 50:50 solvent mixture for both neem leaves (44.7 wt%, $720mg_{Aza}/kg_{leaves}$) and seeds (53.5 wt%, $1045mg_{Aza}/kg_{leaves}$), respectively.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.3
• /
• pp.291-295
• /
• 1998

Various enaminonitriles-terminated reactive polymer precursors containing rigid aromatic and flexible alkyl units were prepared from the corresponding diamines and 1-chloro-1-phenyl-2,2-dicyanoethene (1). All the enaminonitriles-terminated precursors were characterized by spectroscopies and elemental analysis. They were highly soluble in DMF and NMP, and partially soluble in common organic solvents such as THF and acetone. They showed a large exotherm around 350 ℃ attributable to the thermal polymerization by crosslinking of the dicyanovinyl group. Upon heating the precursors, heat-resistant and insoluble network polymers were obtained. Thermogravimetric analyses of the precursors containing rigid aromatic moiety exhibited thermal stability with a 10% weight loss around 420-480 ℃ and 75-88% residual weight at 500 ℃ under nitrogen.

• Journal of Adhesion and Interface
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2023

A conjugated polymer is the next-generation emerging semiconductor material that can be applied in various fields, from organic electronics to biomedical applications. However, its low solubility in an aqueous medium has made the use of toxic organic solvents inevitable, thereby leading to formulation of conjugated polymers in the form of waterborne nanoparticles. This review paper discusses two principles of nanoparticle formation and representative methods for synthesizing conjugated polymer nanoparticles.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.4
• /
• pp.451-456
• /
• 2024

Organic photovoltaic (OPV) devices have attracted attention due to their high efficiency and simple manufacturing process. Applying an overlayer to OPV devices is one way to improve their performance because it can improve charge extraction and suppress vertical phase separation. In addition, dichloromethane (DCM) was used as an orthogonal solvent to minimize the effect on other layers. However, an coating problems due to the use of DCM were found, which affects surface morphology as rough or peeling. Additional research efforts are needed to solve these problems, and optimal results are expected to be obtained by utilizing various buffer layers or selective organic solvents.

• Mass Spectrometry Letters
• /
• v.15 no.1
• /
• pp.62-68
• /
• 2024

The Suspension Trapping (S-Trap) method has been a prominent sample preparation technique since its introduction in 2014. Its capacity to induce protein aggregation using organic solvents has significantly improved protein purification and facilitated peptide identification. However, its full potential for automation has been limited by the lack of a suitable liquid handling system until recently. In this study, we aimed to enhance the automation of S-Trap sample preparation by optimizing the S-Trap digestion process, incorporating triethylammonium bicarbonate (TEAB) and CaCl₂. The utilization of TEAB buffer conditions in this innovative process led to a noteworthy 12% improvement in protein identification. Additionally, through careful observation of various incubation conditions, we streamlined the entire sample preparation workflow into a concise 4 hours timeline, covering reduction, alkylation, and trypsin incubation stages. This refined and expedited automated S-Trap digestion process not only showcased exceptional time efficiency but also improved trypsin digestion, resulting in increased protein identification.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.129.2-129.2
• /
• 2010

AEM which were used for solid alkaline fuel cell(SAFC) were prepared by photo polymerization in method pore-filling with various quaternary ammonium cationic monomers and crosslinkers without an amination process. Their specific thermal and chemical properties were characterized through various analyses and the physico-chemical properties of the prepared electrolyte membranes such as swelling behavior, ion exchange capacity and ionic conductivity were also investigated in correlation with the electrolyte composition. The polymer electrolyte membranes prepared in this study have a very wide hydroxyl ion conductivity range of 0.01 - 0.45S/cm depending on the composition ratio of the electrolyte monomer and crosslinking agent used for polymerization. However, the hydroxyl ion conductivity of the membranes was relatively higher at the whole cases than those of commercial products such as A201 membrane of Tokuyama. These pore-filling membranes have also excellent properties such as smaller dimensional affects when swollen in solvents, higher mechanical strength, lowest electrolyte crossover through the membranes, and easier preparation process compared of traditional cast membranes. The prepared membranes were then applied to solid alkaline fuel cell and it was found comparable fuel cell performance to A201 membrane of Tokuyama.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.1440-1448
• /
• 2014

Co(II)-tetrasulfonated phthalocyanine (CoTSP) is known to be aggregated to dimer at high concentration levels in water. A study on the aggregation of CoTSP using multivariate curve resolution analysis of the visible absorbance spectra over a concentration range of 30, 40 and 50 ${\mu}M$ in the presence of dimethyl sulfoxide (DMSO), dimethyl formamide (DMF), acetonitrile (AN) and ethanol (EtOH) in the concentration range of 0 to 3.57 M is conducted. A hard modeling-based multivariate curve resolution method was applied to determine the dissociation constants of the CoTSP aggregates at various temperatures ranging from 25, 45 and $65^{\circ}C$ and in the presence of various co-solvents. Dissociation constant for aggregation was increased and then decrease by temperature and concentration of phthalocyanine, respectively. Utilizing the vant Hoff relation, the enthalpy and entropy of the dissociation equilibriums were calculated. For the dissociation of both aggregates, the enthalpy and entropy changes were positive and negative, respectively. Molecular dynamics simulation of cosolvent effect on CoTSP aggregation was done to confirm spectroscopy results. Results of radial distribution function (RDF), root mean square deviation (RMSD) and distance curves confirmed more effect of polar solvent to decrease monomer formation.

• Biomedical Science Letters
• /
• v.10 no.3
• /
• pp.293-298
• /
• 2004

This study was performed to compare the growth rates, cellular fatty acid compositions and morphology by using electron microscope of Escherichia coli (E. coli) grown in various conditions including different concentrations of phenol, CdCl₂ and HgCl₂. Ninety eight E. coli strains were isolated from Naktong river and human feces. The content of unsaturated fatty acids, especially 16:1ω7c and 18:1ωc increased as the concentration of phenol and CdCl₂ increased. The content of unsaturated fatty acid increased up to 50 ppb of HgCl₂, but decreased at 75 ppb of HgCl₂. There were more unsaturated fatty acids than saturated fatty acid in the presence of toxic substances. However, the ration was reversed when the affected E. coli was transferred to toxic substance free fresh trypticase soy broth medium. Also, by using transmission electron microscope these cells were observed to various morphological deformation by heavy metals and their deposition on the surface. From these results, we suggested that the changes of major fatty acids composition and morphology of E. coli may be considered to indicate contaminated levels of heavy metals or organic solvents. The information presented here may be useful in predicting effects of heavy-metal and organic solvent contamination in streams and provides a basis for further studies of metal or organic solvent effects on microbial communities.