• Bulletin of the Korean Chemical Society
• /
• v.27 no.8
• /
• pp.1171-1174
• /
• 2006

Various off-the-shelf Lewis acids in conjunction with various onium salts are screened for coupling reaction of $CO_2$ with epoxides. Among the tested ones, $VCl_3/n-Bu_4NOAc$, $VCl_3/(n-Bu_4NCl$ or PPNCl), $FeCl_3/ n-Bu_4NOAc$, and $FeCl_3/ n-Bu_4NOAc$are proved to be highly active. Propylene oxide, epichlorohydrin, styrene oxide, and cyclohexene oxide can be converted over 90% yields to the corresponding cyclic carbonates without the use of organic solvents under mild conditions by 0.1-1.0 mol% catalyst charge.

• Journal of the Korean Chemical Society
• /
• v.15 no.4
• /
• pp.211-217
• /
• 1971

The theory of solubility proposed by Jhon and Kihara has been tested and applied to various systems. In the present paper, the systems are the solubilities of gases such as $Ar,\;H_2,\;N_2,\;O_2,\;CO_2,\;CH_4,\;and\;C_2H_6$ in liquid benzene and carbon disulfide, those of solids iodine and naphthalene in the nonaqueous solvents, and those of gases $H_2,\;N_2,\;O_2,\;Ar,\;CH_4,\;and\;C_2H_4$ in the electrolyte solutions. The theoretical values of solubilities are in good agreement with the experimental data in the literature.

• KSBB Journal
• /
• v.14 no.3
• /
• pp.273-278
• /
• 1999

The molecularly imprinted polymers(MIPs) synthesized at various polymerization conditions were examined as ibuprofen receptors in terms of binding characteristics. The 4-vinylpyridine polymers had 1.2 times higher adsorption capability for (S)-(+)-ibuprofen than the methacrylic acid polymers. The methacrylic acid polymers synthesized by UV radiation had 1.9 times higher selectivity for (S)-(+)-ibuprofen compared to those by thermal initiation. Effects of various solvents for binding were also examined in this research. According to the Scatchard analysis, the (S)-(+)-ibuprofen artificial receptors had two different kinds of binding sites for (S)-(+)-ibuprofen while having only single kind of binding site for ketoprofen. The binding sites of (S)-(+)-ibuprofen, n were calculated as 4.3~4.9 $\mu$mol/g and the dissociation constants, $K_D$ were 0.68 mM for the specific binding.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.2
• /
• pp.338-343
• /
• 2001

The ethanol extract of Quercus mongolica leaf was fractionated by various organic solvents, and their antimicrobial and antioxidative activities were investigated against several microorganisms. The ethanol extract of Quercus mongolica leaf at two thousand $\mu\textrm{g}$ per disc showed 17~21mm inhibition zone against Gram postive and Gram negative bacteria. Among the various solvent fractions from ethanol extract of Quercus mongolica leaf, the hexane fraction showed the strongest antimicrobial activity. Minimal inhibitory concentration (MIC) of hexane fraction was 250$\mu\textrm{g}$/mL against Bacillus cereus, 250~500$\mu\textrm{g}$/mL against Listeria monocytogenes, 500$\mu\textrm{g}$/mL against Staphylococcus aureus, Salmonella typhimurium, Escherichia coli O157, and Pseudomonas aeruginosa. Also, the hexane and chloroform fraction had the similar antioxidative activity compared to that of butylated hydroxy toluene(BHT).

• KSBB Journal
• /
• v.6 no.4
• /
• pp.337-344
• /
• 1991

The liquid-liquid extraction of lipase A from Candide cylindracea and lipase B from porcine pancrease was carried out using reversed micellar organic solvents. Effects of various factors such as ionic strength, pH, and species and concentration of surfactant, on lipase solubilization were studied. A cationic surfactant cetyl-trimethyl ammonium bromide (CTAB) in isooctane/nhexanol(1:1) was found to be an effective solvent and its optimum concentration was 50 mM. KCl among various salts tested was the most effective and the efficiency of solubilization of lipase increased with decreasing the ionic strength of salts. The maximum activity and solubiliz ation of protein were obtained at pH 8. The stripping efficiency has a maximum value at pH 4 and increases with KCl concentration in the range of 0.2∼1.0 M. After the solubilization and stripping, the overall recovery efficiency of mass and specific activity of lipases was 62% and 66%, respectively.

• Archives of Pharmacal Research
• /
• v.17 no.3
• /
• pp.175-181
• /
• 1994

The solid-phase extraction (SPF) with subsequent tert-butyldimethylsilyl (TBDMS) derivatization was investigated for the rapid profiling and screening of various carboxylated non-steroidal antiinflammatory drugs (NSAIDs) simultaneously in biological fluid samples. Compared to the conventional SPF in adsorption mode using Chromosorb 102, Chromosorb 107, Carbopak B and Thermosorb, the SPF in partition mode using Chromosorb P as the adsorbent, and ethyl acetate/methylene chloride as the eluting solvents provided hightest overall recovenies of the NSAIDs from aqueous solutions with good precision. The solid-phase extracted NASIDs were silylated with N-methyl-N-(tert-butyldimethylsily)trifuoroacetamide to TBDMS derivatives and directly analyzed by capillary gas chromatography and gs chromatography-mass spectrometry. The usefulness of the present method was examined for the profilling and screening of saliva, serum and urine samples for various NSAIDs simultaneously.

• Journal of Environmental Health Sciences
• /
• v.23 no.4
• /
• pp.50-56
• /
• 1997

Applied for Drug Delivery System, polymer drug was prepared with chitosan and phthalylsulfathiazole. In spite of various application of chitin derivatives, commercial use of chitin has been limited due to highly resistance to chemicals and the absense of proper solvents. In this study, Chitosan were prepared from chitin which were deacetylated under various condition. The synthetic procedures of polymer drug were performed by acid chloride methods. The antibiotic activities of polymer drug exhibited growth-inhibitory activity against Staphylococcus aureus, Staphylococcus epidermidis, E. coli, Salmonella typhimurium, Klebsiella pneumoniae at the concentration of 471-514 $\mu$g/ml in general. Comparatively, Polymer drug exhibited broad antibacterial activity on MICs 897-1280 $\mu$g/ml against Gram-positive and Gram-negative bacteria including Staphylococcus aureus, Staphylococcus epidermidis and E. coli.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.1
• /
• pp.35-45
• /
• 1998

Chitin/chitosan be known as biodegradable natural polymer. However, commercial use of chitin has been limited due to highly resistance to chemicals and the absense of proper solvents. Therefore, we was studied that chitin was prepared by the application of Hackman's method from Protunus trituberculatus shells. And another viscosity chitosan were prepared from chitin which were deacetylated under various concentration of alkali, reaction time and temperature by the application of Mima's method. And crosslinked chitin/chitosan was preparaed from chitin/chitosan with crosslink agent followed by crosslinkage. The major parameters for chitosan manufacturing methods were found to be concentration of alkali solution, reaction time and temperature etc. The effects of these parameters on chitin, another viscosity(molecular weight) chitosan and crosslinked chitin/chitosan were investigated by various analysis apparatus.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.6
• /
• pp.708-712
• /
• 1993

The Polymerization of p-chlorophenyl propargyl ether (CPE) was carried out using various transition metal catalysts. The catalytic activity of $MoCl_{5}$-based catalysts was greater than that of $WCl_6$-based catalysts. $MoCl_5$ alone and $MoCl_{5}$-cocatalyst systems polymerized CPE very effectively to give a high yield of poly(CPE). In most cases, the polymer yield was quantitative and the average molecular weight $({\bar{M}}n)$ was in the range of 9,000 and 17,000. The NMR, IR, UV-visible spectra indicated that the present poly(CPE) has a linear conjugated polyene structure having p-chlorophenyl oxymethylene substituent. The poly(CPE) was mostly dark-brown colored powder and was completely soluble in various organic solvents such as chloroform, methylene chloride, THF, chlorobenzene, etc. The X-ray diffraction analysis indicated that the present poly(CPE) is amorphous.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.6
• /
• pp.557-561
• /
• 2000

Various enaryloxynitriles-terminated reactive polymer precursors containing rigid aromatic units were prepared from various diamines and 1-(p-formylphenyl)-1-phenyl-2,2-dicyanoethene (1). Arylate end-capped model compounds linked with azomethine bond were also prepared by reacting p-formylphenyl benzoate with diamines to compare the curing ability. The oligomers were highly soluble in polar aprotic solvents such as N,N-dimethylformamide, dimethylsulfoxide and N-methyl-2 -pyrrolidinone. They generally showed an exothermic curing process between $280-350^{\circ}C$, attributable to the thermal crosslinking of the dicyanovinyl group in DSC analysis, and no weight loss at curing temperature. Upon heating the polymer precursors, heat-resistant and insoluble network polymers were obtained. Thermogravimetric analyses of the precursors containing rigid aromatic units showed thermal stability with a 77-92% residual weight at $500^{\circ}C$ under nitrogen.