• Journal of the Korean Ceramic Society
• /
• v.33 no.7
• /
• pp.755-760
• /
• 1996

Sol-gel processing was used to prepare PZT fibers. Titanium isopropoxide Zirconium n-butoxide and lead acetate trihydrate were used as starting materials and TEA(triethanolamine) was added to form stabilized Pb-Ti-Zr complex alkoxide, Effects of catalysts and various solvents on the state of precursor sol gelation reaction fiber spinnability pyrolysis and crystallization were also investiated.

• Proceedings of the Korea Environmental Mutagen Society Conference
• /
• 2004.05a
• /
• pp.110-111
• /
• 2004

• Bulletin of the Korean Chemical Society
• /
• v.17 no.8
• /
• pp.682-685
• /
• 1996

Photothermal properties depend on the characteristics of energy transfer processes in solution. In this study, a time-resolved single beam thermal lens experiment in various solvents is employed to investigate the energy coupling effects which govern the energy transfer processes. Interestingly, it is observed that the behaviour of the photothermal propagation in solution depends on the property of solution and the concentration of solute in a single beam thermal lens configuration. These characteristics lead us to consider the solute-solvent coupling effects as well as the solvent-solvent interactions.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.4
• /
• pp.326-331
• /
• 1995

Poly(enaryloxynitriles) containing Schiff bases were prepared from p-bis(1-chloro-2,2-dicyanovinyl)benzene (2) and various aromatic diols having Schiff base moiety by interfacial polymerization. The chemical structure of the polymers was confirmed through synthesis of their corresponding model compounds. All the polymers were soluble in polar aprotic solvents and their brittle films were cast from DMF solution. They showed a large exotherm around 340 ℃ attributable to the chemical change of dicyanovinyl group. Especially, curing of azomethine group was observed to occur at 390 ℃ by differential scanning calorimetry. According to the thermogravimetric analyses, they exhibited excellent thermal stability with 60-90% residual weight at 500 ℃ in nitrogen.

• Bulletin of the Korean Chemical Society
• /
• v.6 no.3
• /
• pp.162-164
• /
• 1985

Nucleophilic substitution reaction of dansyl chloride with anilines in various solvents have been investigated. The Bronsted ${\beta}$ and Hammett ${\rho}_N$ values indicated that the bond formation is advanced more than the bond breaking at the transition state. Solvatochromic correlations also predicted the importance of bond formation at the TS, showing a greater contribution of polarity (${\pi}^{\ast}$) compared to hydrogen bond donor acidity (${\alpha}$). The effect of solvent on rate was found to violate the reactivity-selectivity principle.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.5 s.142
• /
• pp.617-625
• /
• 2005

The purpose of this study was to develop functional and environment-friendly polyester fabric by irradiating Ultra-Violet, which was produced by the low-pressure mercury lamp. UV irradiation was conducted with various treatment times and distances. Also, pretreatments of solvents and photoinitiator were used to improve the surface modification effects. The effects of UV irradiation on the moisture regain were found to increase gradually with increase of UV treatment time and decrease of treatment distance. Compared the effects of UVC and UVA, UVC was more effective than UVA. Moisture regain and wicking of PET was increased after UV treatment in our experimental condition. And owing to increasing of moisture regain, static charge was decreased. Pretreatment of solvents such as methanol, ethyl ether and addition of photoinitiator such as Benzophenone accelerated surface modification. The moisture regain was increased but wicking was decreased with pretreatment and addition of photoinitiatior. Therefore it is considered as inappropriate f3r clothing because of wicking effects. Yellowness, tensile strength and elasticity slightly decreased after UV irradiation.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.5
• /
• pp.1209-1214
• /
• 2010

Reactions of 2-methyl-2-chloroadamantane (1) in a variety of pure and binary solvents have been studied at various temperatures and pressures up to 80 MPa. The sensitivity (m) to changes in solvent ionizing power of the Grunwald-Winstein equation, and the activation volume (${\Delta}V^{\ddag}$) are calculated from the specific rates. An excellent linear relationship (R = 0.997) for 1, log (k/$k_0$) = $0.80Y_{Cl}$ + 0.11, and the activation volume, ${\Delta}V^{\ddag}$ = -15.2 ~ -10.2 $mL{\cdot}mol^{-1}$ were observed. These values are similar to those for solvolyses of 1-adamantyl halides over the full range of solvents, suggesting that the unimolecular mechanism involving ion pairs is rate-determining. These observations are also compared with those previously reported for the corresponding 1-adamantyl derivatives and chloroformate esters.

• Journal of the Korean Ceramic Society
• /
• v.49 no.5
• /
• pp.417-422
• /
• 2012

Copper nano particles have been considered as the materials for conductive ink due to its good thermal, electrical conductivity and low cost. However, copper nanoparticles oxidize easily, decreasing dispersion stability and electrical conductivity. Therefore, it is important to develop a method to minimize oxidation of copper nano particles to improve its dispersion stability property in copper nano ink. In this study, copper nano particles were coated with 1-Octanethiol VSAM(Vaporized Self Assembled Multilayers) to prevent oxidation and coated copper powders were dispersed in conductive ink successfully by studying its relationship of different chain length of solvents to 1-Octanethiol coating layer to fabricate nano ink. Various alcohol solvents, such as 1-Hexanol, 1-Octanol, and 1-Decanol were used. The coating layer was observed using FESEM and TEM. Furthermore, dispersion of copper nano particles in nano inks, was characterized using Turbiscan analyzer, viscometer, and contact angle measurement tool.

• Journal of the Korean Chemical Society
• /
• v.39 no.8
• /
• pp.589-597
• /
• 1995

In water-ethanol systems, the limiting equivalent conductances of electrolytes were obtained using conductometric method. Using TATB method, the limiting equivalent ionic conductances of Li+, Na+, K+, Cl-, and Br- ions were also obtained. The effective radii of corresponding ions were determined using Nightingale method. From the volume of the solvation shell, the four solvation numbers were suggested. The reasonable solvation numbers (hH2O+hO) were estimated by comparing the values obtained by from the various suggested methods. The isosolvation point of ion in water-ethanol estimated was found to be larger than that of in water-methanol. This result agree with ET (solvent polarity) values of solvents. From the reasonable solvation numbers of ions in water-ethanol, the selective solvents of corresponding ions in water-ethanol were obtained.

• Biomaterials and Biomechanics in Bioengineering
• /
• v.1 no.1
• /
• pp.13-25
• /
• 2014

In the current study, a drug-eluting stent coated with biodegradable polymers and sirolimus was developed by using an ultrasonic nanocoater and characterized in aspects of surface smoothness and coating thickness. In addition, in vitro release profiles of sirolimus by changing top coating layer with different biodegradable polymers were investigated. Smooth surfaces with variable thickness could be fabricated by optimizing polymer concentration, flow rate, nozzle-tip distance, gas pressure, various solvents and ultrasonic power. Smooth surface could be generated by using volatile solvents (acetone, chloroform, and methylene chloride) or post-treating with solvent vapor. Coating thickness could be controlled by varying injection volume or polymer concentration, and higher concentration could reduce the coating time while obtaining the same thickness. The thickness measurement was the most effectively performed by a conventional cutting method among three different methods that were investigated in this study. Release profiles of sirolimus were effectively controlled by changing polymers for top layer. PLGA made the release rate 3 times faster than PDLLA and PLLA and all top layers prevented burst release at the initial phase of profiles. Our results will provide useful and informative knowledge for developing drug-eluting stents, especially coated with biodegradable polymers.