• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 춘계학술대회 논문집
• /
• pp.71-73
• /
• 1994

In this paper we have investigated discharge conditions(parameters of this experiment) in facing targets sputtering system and fabricated $Al_{N}$ thin films. The parameters of this study are diameter of wing(d) and distance(L) between two facing targets. Varing discharge conditions, the discharge characteristics are wide different. The optimal conditions in this experiments are d = 6.5 [cm], L = 6.5[cm]

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1999년도 특별강연 및 추계학술발표대회 개요집
• /
• pp.181-184
• /
• 1999

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 B
• /
• pp.431-433
• /
• 1997

In this paper, we consider the robust pole assignment inside the circular region for linear systems with time-varing uncertainty. The considered uncertainties are the norm bounded uncertainty and the matrix polytopes type uncertainty. Since the considered uncertainties are time-varying, it should remind that the closed loop system be time-varing system. Therefore, we should consider not only the pole assignment but also the stability. We present new conditions that guarantee the robust pole assignment and the robust stability. Finally, we show the usefulness of our results by an example.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.761-762
• /
• 1988

This paper is to investigate dielectric properties, dielectric breakdown strength, varing of interior organization and gelling point temperature as parameter of post-cure conditions of thermo-setting epoxy resin.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.14-18
• /
• 1996

From the experimental study of Wire-Cut EDM of die-material(SKD-11), machining characteristics such as machining rate, surface roughness and hardness have been observed and evaluated under the conditions varing pulse on time, pulse off time, peak voltage after fixing other conditions. It was found that various operating conditions have significant influences on machining rate, surface roughness. Hardness of workpiece was unaffected by operating conditions.

• Journal of Ginseng Research
• /
• 제3권1호
• /
• pp.40-53
• /
• 1979

In order to investigate the optimal conditions which affects to extraction of ginseng extract and saponin in ginseng extract, experiment was carried out varing with ethanol percentage, extraction time, temperature, sol$.$vent and Plant Parts. The results art as follows: 1. The amounts of ginseng saponin was increased according to increanation of ethanol Percentage while the amounts of ginseng extract was decreased. 2. The amounts of ginseng extract was increased as the prolongation of extraction time, on the ether hand, ginseng saponin contents increased lentil 40hr. and decreased after that. 3. By the raise of extract temperature, both of the amounts of ginseng saponin and ginseng extract was increased two times and four times. respectively. 4. The total amounts ginseng extract was obtained 22.86u when the water used as the extraction solvent, 11.28% on ethanol and 11.04U on methanol, in the order. and the saponin contents gained when the extraction solvents of water, methanol and ethanol 7.47%, 12.36% and 12.77%, respectively. 5. It showed 9.23% of ginseng extract in epidermis and 8.4% of ginseng saponin in tail Part of raw ginseng and in the case of dried ginseng, ginseng extract and saponin showed the most amounts in epidermis of 18.28% and 19.35%, respectively. 6. The ratio of panaxadiol and panaxatriol contents of ginseng saponin was almost same when it was extracted varing with ethanol percentage and extraction time (duration), and the more alcohol percentage and the longer extraction time increased, the more fractional content of ginseng saponin was extracted.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1994년도 제6회 학술발표회 논문개요집
• /
• pp.98-101
• /
• 1994

white diamond thin film, which should be compposed of almost ppure diamond, could be successfully obtained under high ppressure conditions(above 150 Torr) by means of MppECVD(microwave pplasma enhanced chemical vappor depposition, ASTeX 1.5 kW). Characteristics of the films with varing expperimental pparameters have been examined. From the expperimental results, we will discuss the surface morpphology and the growth mechanism of the films.

• 한국응용과학기술학회지
• /
• 제14권1호
• /
• pp.89-93
• /
• 1997

In this research, ultra-thin films of organic charge transfer complex were deposited on to ordinary microscope slide-glass subtrates with a Langmuir-Blodgett technique. ${\pi}$-A isotherm characteristics of these complex were studied in order to find optimum conditions of deposition by varying temperature of subphase, compression speed, and spreading amount. Transfer ratio of these films were studied during the process of deposition. The UV-visible absorbance spectra of LB films were measured to find state of deposition by varing layer number. The observed optimum conditions of surface, pressure, spreading amount, and dipping speed for depositing LB films(Y-type) were 38m/Nm, $150{\mu}l$ and 5mm/min, respectively. Since the tansfer ratio is close to 100%, the monolayer on the subphase seems to be well transferred to the solid substrate. The thickness of the film was well-controlled as the UV-vis absorbance of films were changed linear according to the number of layers.

• Archives of Plastic Surgery
• /
• 제33권4호
• /
• pp.503-505
• /
• 2006

Purpose: Cutis verticis gyrata(CVG) is a morphologic syndrome, typically occurring on the scalp, characterized by varing development of permanent folds and furrows conferring a corrugated or convoluted appearance which resembles the outer surface of the cerebrum. Cutis verticis gyrata can be categorized into primary and secondary types according to various etiologic factors and associated conditions which cause disease process. Methods: We report a case of essential primary cutis verticis gyrata in a 24-year-old male who did not have any other underlying or associated conditions. Results: After we made an incision to the galea aponeurotica of patient's scalp four times under local anesthesia, we dissected along the subapponeurotic layer and adjusted the flaps each other, and then sutured the flap. Conclusion: After the operation, the clear margin disappeared and it did not recur.

• 한국세라믹학회지
• /
• 제28권1호
• /
• pp.37-45
• /
• 1991

The critical current density, electrical conductivity, critical magnetic field, Meissner effect, apparent density, and microstructure of YBa2Cu3O7-x ceramic superconductor prepared by polymeric precursor, while varing calcining and sintering conditions, were investigated. The best superconducting properties could be obtained from the body sintered at 93$0^{\circ}C$ for 10h after calcining at 90$0^{\circ}C$ for 10h, which gave 383A/$\textrm{cm}^2$ of critical current density(Jc), 96K of onset temperature(Tonset), 94. 8K of zero temperature (Tzero) 225 Oe of critical magnetic field (Hc1), 72.8% of superconducting volume fraction measured by Meissner effect and 6.28g/㎤ of apparent density.