• Journal of Sericultural and Entomological Science
• /
• v.3
• /
• pp.61-67
• /
• 1963

This report is prepared to find how the filament of cocoon bave size deviation relates with the raw silk made by them which are intensively cultured in this country. Three recommended hybrid varieties and two varieties under working at Suwon Sericultural Experiment Station were selected as specimens. The cocoons were reeled as an individual filament of every fifty meters long skein with a wrap reel to weigh the denier and to investigate the relationship of the above statement so that it may be used for the quality estimation before processing it into raw silk. The conclusions obtained are as follows. (1) The variation of Pk${\times}$Sn was found as best cocoon for 21 denier raw silk use, but the number of cocoon to make the denier has to be eight which might cause more labor cost. (2) Baektoo-Kumkang and Myohiang-Chongchon were found as economical varieties for 21 denier use. (3) Seulak-Soyang is a proper variety for the use of 14 or 28 denier silk use. (4) Myohiang-Chongchon did not confirm a good property from the aspect of denier deviation. (5) It was found that there was a fairly strong corelationship between the mean cocoon bave size deviation as indicated by Ono's report. (6) Three graphs were prepared to estimate the cocoon quality before processing into various sizes of raw silk using the mean cocoon bave size and the raw silk size to be prepared. (7) Mean time, the graph which is able to estimate the expectable grade of the raw silk size deviation was designed for the practical use. (8) The expectable grade of the varieties used in this report were found as following data. Notice (A......cocoon number to make raw silk (B......total cocoon bave size deviation (C......expectable silk grade (9) The result of the work concerning the expectable denier deviation on 21 denier silk was the same with the statistical actual testing result as 1.25 D while the distribution showed farther necessity of improvement in technically.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.5
• /
• pp.762-766
• /
• 2011

Cropping system is very important for environment conservation and improvement of nutrient recovery rates in agricultural land. This case study was conducted to identify the nutrient balance of major upland cropping types with different districts. Typical cropping systems at MuAn and HaeNam located in the south coast district were cultivated with soybean-chinese cabbage or garlic and garlic-soybean-chinese cabbage-hot pepper. Alpine district, PyeongChang was cultivated with double cropping of chinese cabbage and potato-radish or chinese cabbage for one year. Typical cropping type of AnDong, YeongYang where are well known for hot pepper cultivation was hot pepper's mono cropping and hot pepper-soybean or hot pepper-sesame for one year. But SeoSan and HongSeong, where are located in mid-west coast had variety cropping system compareed to other districts. Double cropping of chinese cabbage, a heavy fertilizing crop, caused higher nutrient balance in the field when it was cultivated consistently. Experiment showed that heavy fertilizing crops, such as chinese cabbage, garlic and onion, need to be rotated with soybean and sesame cultivation which need smaller fertilizer level. Alpine arable land has shown higher nutrient balance than other areas, and the introduction of rotation crops are needed to reduce nutrient balance and environmental protection.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.9 no.3
• /
• pp.261-270
• /
• 2019

With the advent of the Fourth Industrial Revolution, multi-variety production in the up-to-date manufacturing environment is proceeding more rapidly whereby production planning and management have been getting more complicated. Moreover, the need to improve production efficiency through effective operation sequencing is further heightened. Fundamentally, the effective operation sequencing can reduce the set-up of the equipment, efficiently utilize the equipment, shorten the set-up time, and ultimately contribute to productivity improvement. This study deals with the problem of efficient operation sequencing in a situation where a single machine performs multiple operations. The complexity of the problem is very high when compared to the case where only one operation is performed on one machine, which is covered in most existing studies. In this paper, we propose an integer programming model to minimize the number of setups. This study aims at minimizing the number of mold replacement times in the process of processing a given production order for the wiring harness manufacturing process, which is one of the components of automobile electric field. In addition, brief case studies are presented to verify the validity of the proposed mathematical model.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.4
• /
• pp.179-190
• /
• 2019

To alleviate financing difficulties of small and medium sized enterprises (SMEs), the government and municipal governments are providing a variety of SME policy funding programs. This study introduced the policy funding program of Gangwon-do and quantitatively analyzed the financial performance of companies supported by the Gangwon-do SME policy fund in the year 2014. Specifically, we compared the financial ratios for three years, from 2013 to 2015, between funded firms and non-funded firms. In addition, we applied a regression analysis to see if the policy funding program contributed to profitability (the operating profit growth and return on equity), stability (the interest coverage ratio and debt-to-equity ratio), and growth (the asset growth and sales growth) of the funded firms. The empirical results show that the firms that received the policy funds did not show any improvement compared to non-funded firms in terms of profitability, stability, and growth. This suggests that Gangwon-do should improve the policy funding program, that currently provides only an interest amount of 2-4% of the corporate loan principal, without any strategic selection criteria for the target funded firms, and without any follow-up management system, after support.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.82-90
• /
• 2019

The purpose of this study was to examine early childhood teachers' importance and performance of technology leadership. A survey was conducted on 205 early childhood teachers. Borich's needs model was used to calculate their needs. In the area of director leadership and vision, the early childhood teachers felt the most need for opportunities to participate in conferences or training programs related to the educational utilization of technology. In the area of teaching-learning methods, they called the most for better ways to take advantage of technology considering the characteristics of the activity areas and activity types. In the area of teaching professionalism, the items they asked for the most were building confidence over the educational utilization of technology and case studies of superior teaching and learning. In the area of institutional support, they felt the most need for assistant human resources who could assist in solving possible problems using technology. In the area of evaluation, they called the most for the development of a variety of evaluation tools and methods. Finally, the item they called for the most in the area of social, ethical, and legal support from the institutions to which they belonged was the preparation of guidelines on how to be in good health in times of using technology.

• Journal of agriculture & life science
• /
• v.52 no.6
• /
• pp.27-36
• /
• 2018

Recently, the demand for new cultivar of oriental mustard(Brassica juncea) is increased as the consumption of oriental mustard has increased dramatically in the market due to Kimchi is attracting the world's attention. However, absence of seed supply system can cause many problems including inbreeding depression due to self seed production, deterioration of the seed purity and heterogeneity of commercial seed. To establish the $F_1$ variety breeding system of oriental mustard, pure line and inbred lines were screened from inbreeding genetic resources. Male-sterile line was also selected from breeding combinations for the quality improvement of mustard. The combining ability from(Indojasai ${\times}$ Goheungdamyang) combinations and isolation line of(MS910 ${\times}$ Japan red mustard 8 ${\times}$ Ganghwa mustard 9) was highest, thus these lines were selected as parental lines. PCR(Polymerase Chain Reaction) and gene sequence analysis revealed that the genes related to CMS(orf263, orf220, and orf288) were distributed in mitochondria. The isolated lines from this study also showed good performance in yield test and farmhouse prove test.

• Journal of the Korean Orthopaedic Association
• /
• v.53 no.6
• /
• pp.466-477
• /
• 2018

Orthopaedics is an area where 3-dimensional (3D) printing technology is most likely to be utilized because it has been used to treat a range of diseases of the whole body. For arthritis, spinal diseases, trauma, deformities, and tumors, 3D printing can be used in the form of anatomical models, surgical guides, metal implants, bio-ceramic body reconstruction, and orthosis. In particular, in orthopaedic oncology, patients have a wide variety of tumor locations, but limited options for the limb salvage surgery have resulted in many complications. Currently, 3D printing personalized implants can be fabricated easily in a short time, and it is anticipated that all bone tumors in various surgical sites will be reconstructed properly. An improvement of 3D printing technology in the healthcare field requires close cooperation with many professionals in the design, printing, and validation processes. The government, which has determined that it can promote the development of 3D printing-related industries in other fields by leading the use of 3D printing in the medical field, is also actively supporting with an emphasis on promotion rather than regulation. In this review, the experience of using 3D printing technology for bone tumor surgery was shared, expecting orthopaedic surgeons to lead 3D printing in the medical field.

• Analytical Science and Technology
• /
• v.31 no.6
• /
• pp.219-224
• /
• 2018

The fruit and stem of Opuntia ficus-indica var. aboten (OFS), a native plant of Jeju Island, are considered a safe food source. Moreover, stem extracts have been previously reported to possess a variety of biological effects (e.g. anti-inflammatory and anti-oxidant, including the ability to partially ameliorate cognitive impairment), suggesting that this plant may have utility as a functional food. The present study investigated whether fermentation by lactic acid bacteria enhances the biological effects of OFS extracts. The acetylcholinesterase (AChE) inhibitory activity of fermented or non-fermented OFS extracts was evaluated, and the content of marker components dihydrokaempferol (DHK) and quercetin-3-methyl ether (3-MeQ) was analyzed using high-performance liquid chromatography. Fermented (relative to non-fermented) OFS extracts exhibited improved AChE inhibitory activity ($IC_{50}=28.35 mg/mL$), with AChE inhibitory activity resulting from fermentation by L. plantarum ($IC_{50}=12.56mg/mL$) exceeding that resulting from fermentation by L. fermentum ($IC_{50}=17.71mg/mL$). Furthermore, fermented (relative to non-fermented) OFS extracts exhibited a 16.7 % increase in DHK content, and 3-MeQ content of OFS extracts fermented by L. plantarum and L. fermentum increased by 28.6 % and 21.4 %, respectively. Therefore, OFS stem extract AChE inhibitory activity, as well as DHK and 3-MeQ content, was enhanced by fermentation with Lactobacillus spp. This suggests that fermented OFS extracts may contribute to prevention or improvement of cognitive impairment. These data are anticipated to be useful in the development of enhanced-efficacy OFS products.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.4
• /
• pp.213-218
• /
• 2018

Recent Korean policies have been suggested as globalization, openness and expansion of the working world through k-move. In an era of communication, interest and expectations for overseas employment and advancement into the country are increasing as a way to solve the global trend of employment abroad. Until recently, overseas employment support systems and policies have been implemented in a variety of ways through collaboration with universities and government agencies, so this paper will study Australia's national support and vocational education systems, for example, and Australia's foreign employment conditions and the overall system. This will help overseas employers and policy makers understand the status quo and will be meaningful as additional data needed by Korean universities and policy agencies. On the basis of these data, it was proposed as a conclusion on how to supplement the policy. Through the text, we aim to help establish practical goals and solutions that will help job applicants from overseas Australia, government and university policy systems. Accordingly, the main body presented the policies and assessment methods of the Australian vocational system, the overseas job support system, the corresponding service support system, and the overseas conditions and information on the program, and, in conclusion, the implications of policy supplementation.

• Journal of the Korean Institute of Gas
• /
• v.23 no.2
• /
• pp.1-8
• /
• 2019

Because of environmental pollution problem, interests in hydrogen energy has been concentrating sharply. Especially in Korea, the market related with fuel cell vehicles and hydrogen refueling stations is increasing actively under the government-led. However, the actual contributions to environmental improvement effect of hydrogen energy is required to be evaluated with representing reality. In this sense, lots of conventional analyzing tools have some limitations to adapt in Korea's situation directly. It is caused by the differences of raw energy market between the US and Korea. That is, most of analytic tools are developed by representing energy market of the US, where can produce variety of raw feed energy sources. Therefore, in this paper, we propose mass balance based numerical analyzing method, which is suitable for the actual hydrogen production process in Korea for exact evaluation of $CO_2$ emission amount in this country. Using proposed method, we has demonstrated reformed hydrogen from natural gas, LPG and naphtha, electrolysis-based hydrogen, and COG-based hydrogen. Furthermore, with the comparison of GREET program analysis results, robustness of numerical analysis method is demonstrated.