• 천문학회보
• /
• 제4권
• /
• pp.26.2-26.2
• /
• 1979

• Anatomy and Cell Biology
• /
• 제55권4호
• /
• pp.433-440
• /
• 2022

This study aimed to investigate the general mandibular symphysis (MS) shape variation among Class III skeletal base, using geometric morphometric analysis. Pre-treatment lateral cephalometric radiographs of 254 patients aged 11-40 years old, with Class III skeletal base (ANB <1°) and lower incisor angle (<99°) were included. Nine-landmarks with x and y coordinates were identified on MS using TPSDig2 software, then exported into Morpho J for shape and statistical analysis. Principal component analysis showed that three main shape dimensions with a total variance of 74.6% represented the majority variation of samples. Procrustes Anova showed the shape of MS in Class III skeletal base to be mainly influenced by gonial angle, incisor inclination and sex (P<0.0001). Canonical variate analysis showed that high gonial angle groups had significantly narrower and elongated MS whereas low gonial angle groups had wider, bulbous and rounded MS (P<0.0001). The ratio of alveolar part to basal part was 1:5 in low gonial angle and 2:3 in high gonial angle. Males had significantly taller MS with narrower B point area compared to females (P<0.0001). Retroclined incisors exhibited taller and retroclined alveolar parts (P<0.0001). The shape of MS in Class III skeletal base varied at the alveolar part, basal part or both and it is influenced by gonial angle, incisor inclination and sex. Hence, understanding the shape variation of MS is important to aid orthodontic treatment planning.

• 패션비즈니스
• /
• 제12권3호
• /
• pp.99-115
• /
• 2008

International exchange gets active in nations with the increase of Internet use and heading toward digital age. Thus the communication conveying image of nations effectively plays an important role in an international society. Sports events are regarded as important international exchange events and good opportunities for public relations of one's own country and taken as tools of planting good images in other nations. This study surveyed the concept and history of uniform through the documents and previous studies in order to find the aesthetic characteristics of sportswear uniform applying the image of national ensign and investigates the origin and start time in Korea of selected 6 sports items. As a result of finding the expression way of ensign image and drawing the aesthetic characteristics by analyzing the use and variation of ensign colors, the use of colors other than ensign and reflection of ensign form in collected 60 sports uniforms, this study could draw the symbolical beauty, beauty of variation and beauty of brevity. First, symbolical beauty is the aesthetic characteristics expressing uniforms by using the pattern ensign symbolizes and ensign colors themselves or enlarging a part of ensign. Second, beauty of variation is the aesthetic characteristics creating geometrical new patterns in uniform through the distortion and exaggeration of ensign shape, or transforming the colors themselves of ensign. Third, beauty of brevity is the aesthetic characteristics using other colors only as decorative factor while applying the main colors of ensign to the most part of uniform, or unifying the uniforms with only one color of ensign. As a result of survey, the proportion of the symbolical beauty was highest in summer season and beauty of brevity and beauty of variation followed and the proportion of beauty of variation was highest and the symbolical beauty and beauty of brevity followed after that in winter season. This study found the way of expressing image of one's own country in sports uniform through this article, expecting the exact recognition on sports uniform and the diversity of sports uniform design in which the images of the nation are expressed more variously.

• 한국생산제조학회지
• /
• 제20권1호
• /
• pp.23-27
• /
• 2011

This study analyzes about the variation of pressure and stream velocity according to the movement of tail wing. The pressure at the front part of airplane becomes lower than at the rear part and the stream velocity has decreased by being bumped against the wing of airplane. The pressure at the front part of rudder becomes higher than at its rear part according to the movement of rudder among the tail wings of airplane. The more stream velocity becomes decreased, the more rudder spreads out. As the tail wing of airplane folds, the pressure at its front part becomes higher. And the pressure at its rear part becomes lower than at its front part. The more tail wing of airplane folds, the more stream velocity becomes decreased.

• 한국정밀공학회지
• /
• 제13권6호
• /
• pp.78-89
• /
• 1996

Every mechanical component is fabricated with the variations in its size and shape, and the allowable range of the variation is specified by the tolerance in the design stage. Geometric tolerances specify the size or the thickness of each shape entity itself or its relative position and orientation with respect to datums. Since the range of shape variation can be represented by the variation of the coordinate system attached to the shape, the transformation matrix of the coordinate system would mathematically express the range of shape variation if the interval numbers are inserted for the elements of the transformation matrix. For the shape entity specified by the geometric tolerance with reference to datums, its range of variation can be also derived by propagating the transformation matrices composed of interval numbers. The propagation depends upon the order of precedence of datums.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2006년도 하계학술대회
• /
• pp.105-110
• /
• 2006

The most sensitive part of the installed optical cable is the optical loss variation of the splicing point according to the environmental changes. This paper presents the details of the experimental results of the external environmental changes on optical loss, such as bending, temperature variation, temperature variation after water osmosis and variation. Through the bending test of optical fiber, rapid increase of optical loss was measured within the diameter of 30mm. The result of optical loss variation within the temperature range of $-30^{\circ}C{\sim}60^{\circ}C$ is less than 0.02dB. It was confirmed that the maximum optical loss increased up to 0.2dB in case of water osmosis within the temperature range of $-40^{\circ}C{\sim}80^{\circ}C$. There is small optical loss variation of 0.01dB under the 1mm vibration test. The experimental results of this paper can be used as the reference data for the design of the optical fiber cable splicing enclosure to protect the optical loss variation due to environmental changes.

• 패션비즈니스
• /
• 제11권4호
• /
• pp.82-91
• /
• 2007

The purpose of this study is to evaluate the differences of visual effects by variations in the shoulder length and puff volume of the puff sleeve blouse. The stimuli are 21 samples: 3 variations of the shoulder length and 7 variations of the puff volume. The data has been obtained from 40 fashion design majors. The data has analyzed by Frequency, Factor Analysis, ANOVA, Scheffe's test and MCA method. The result of the study are as follows. The visual effects by the shoulder length and puff volume are composed of 4 factors : the width of the upper body, the shape of the breast part, the shape of the neck part and the shape of the upper arm. In these factors, the width of the upper body is estimated by most important factor. In view of the visual effects by variation of the shoulder length, the shorter shoulder length goes, the more positive visual image comes in the shape of the breast part. In comparison of the differences of visual effects by the 7 variations of puff volume, the arm looks thin and long when the puff volume goes enough and the breast part has a better visual assesment in case the puff volume goes poor. In the interaction effects between the shoulder length and puff volume, the shoulder length have significant differences in the shape of the breast part, the shape of the neck part and the shape of the upper arm and puff volume has significant difference in the width of the upper body.

• Journal of Magnetics
• /
• 제21권3호
• /
• pp.425-430
• /
• 2016

The aim of this study was to measure the setup variation for X (lateral), Y (longitude), and Z (vertical) by taking magnetic megavoltage computed tomography (MVCT) before treating the brain, oropharynx, lung, and prostate patients on helical tomotherapy. In this study, 30 patients were chosen for each of the treatment areas, and their skin was labeled with a mark on a treatment planning reference point when taking CT. We preceded MVCT prior to tomotherapy and then conducted an auto registration based on the bony landmarks; image registration was used for automatically matching the patient's setup. Lastly, we confirmed and evaluated the translation coordinates of the images for 30 patients. The following shows the comparison result of the setup errors of each part: X (lateral) showed the highest setup errors with $3.44{\pm}2.05$ from Lung; Y (longitude) showed the highest setup errors showing $3.40{\pm}2.87mm$ from Prostate; and Z (vertical) showed the highest setup errors showing $6.62{\pm}4.38mm$ from Lung. This result verifies that the setup error can be prevented by taking MVCT before the treatment, and Planning Target Volume (PTV) margins can be reduced by referring to the resulting value of each treatment part. Ultimately, the dosage of the normal organs can be decreased as well as any side effects.

• 한국정밀공학회지
• /
• 제21권8호
• /
• pp.188-195
• /
• 2004

In this paper we analyzed the mechanical behavior with respect to the thickness variation of elastic foundation(fatty tissue) in end-to-end anastomosis. This study considered the preliminary deformed shape induced by suturing in the anastomosis of coronary artery and PTFE with different diameters using simplified suturing model and the fatty tissue surrounding heart and coronary artery for more accurate result using finite element method. Area compliance(CA) was used to analyze the final deformed shape of the anastomotic part with respect to the thickness variation of fatty tissue under mean blood pressure, 100mmHg(13.3㎪). And Equivalent and circumferential stresses in the anastomosis were also analyzed with respect to the change of initial diameter ratio( $R_1$) and fatty tissue thickness( $T_{F}$). The results obtained were as follows : 1 When the elastic foundation, assumed to be incompressive material, surrounded the grafts in anastomosis, the compliance mismatch of artery and PTFE was reduced by 47 -72%. 2. As the initial diameter ratio( $R_1$) became larger, the higher difference of compliance was induced in spite of elastic foundation surrounding grafts. 3. The maximum nondimensional circumferential stress is twice or three times as high as the maximum nondimensional equivalent stress in the anastomotic part.t.

• 한국태양에너지학회 논문집
• /
• 제32권5호
• /
• pp.11-17
• /
• 2012

In this study, a simulation program was developed with heat transfer model in the thermal storage tank for a solar collector and burner combined heating and hot water supply system. Analysis was conducted with variation of operating condition and schedule to analyze performance of a hot water supply and panel heating system with a solar collector and burner combined thermal storage tank. The simulation program is divided two sections. One part is calculation of temperature variation of water which flows through the panel in the floor for heating of the residential house during 24 hours, and the other part is heat transfer calculation for the reaction time to get desired water temperature in the thermal storage tank. As results, light oil consumption and system performance during operation period were analyzed with variation of climate condition and with or without solar collector. Most of the case, oil could be saved about from 24 to 41% with installing the solar collector. The performance of the system is more dependent on radiation time of the solar collector rather than the intensity of the solar radiation which was adopted for the climate analysis.