• Journal of the Korean Society of Radiology
• /
• v.13 no.2
• /
• pp.153-158
• /
• 2019

The purpose of this study is to compare and analyse the differences between a customized small finger made by 3D printing technology, a real small finger, and the other made from plaster of an orthotic company. The areas and the volumes of each cross-section were measured by Computer tomography(CT) and a 3D scanner and analysis of variance was performed to find out the differences of each shape. The areas of the point of 15.69mm, Distal Interphalangel Joints, were measured 30 times respectively using the caliper toll function of Picture Archiving Communication System(PASC) program. The volumes were measured by Configure Units of Meshmixer Program. There was no significant difference in the areas between three of them and there was 0.2 mm gap in the volume, which was more than the significance probability. Therefore, the result of this study shows the availability of finger orthoses made by 3D printing technology in the medical field.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.2
• /
• pp.102-108
• /
• 2019

Pericarp thickness of vegetable corns such as sweet and waxy corn is one of the crucial traits, contributing to their edible quality. This study was carried out to compare the pericarp thickness of super sweet and waxy corn hybrids measured with kernel samples prepared using different methods at different grain filling periods. The samples comprised excised pericarp from dried, frozen (at $-4^{\circ}C$), and fresh kernels. Analysis of variance performed separately on super sweet and waxy corn hybrids indicated a significant three-way interaction among cultivars, kernel sample preparation methods, and days after pollination (DAP). Dried samples of super sweet corn hybrids presented reasonably stable pericarp thickness measurements during grain filling, while all the sample preparation methods fluctuated less as grains of waxy corn hybrids matured. Waxy corn is best consumed at around 24 days after pollination. Pericarp thickness of waxy kernel samples regardless of preparation methods investigated was the same at 24 DAP with a few exceptions. Overall, the common method of drying kernel samples before pericarp excision can provide reliable data for estimating the tenderness of vegetable corn hybrids.

• Ecology and Resilient Infrastructure
• /
• v.9 no.2
• /
• pp.100-106
• /
• 2022

The relationships between river length and weir density versus fish species observed were analyzed for 210 local rivers in the Seomjin River system (SJR). A nonlinear exponential relationship between river length and number of fish species were observed. Model coefficient was 0.03 and coefficient of determinant (R²) was 0.59, meaning that about 59.0% of total variance was explained by river length variable. Predicted value by model and observed number of species showed a difference. About 110 local rivers (about 52.4%) showed lower value than predictive value. The average index of weir's density (IWD) in the SJR was about 2.7/km, which was significantly higher than that of other river basins. As a result of nonparametric 2-Kimensional Kolmogorov-Smirnov (2-DKS) analysis based on the IWD, the threshold value affecting fish diversity was about 2.5/km (D_max=0.048, p<0.05). Above the threshold value, it means that the number of fish species would be decreased. In fact, the ratio of the expected species to the observed species was lowered to less than 70%, when the IWD is higher than the threshold value. To maintain aquatic ecological connectivity in future, it is necessary to manage IWD below the threshold value.

• Korean Journal of Radiology
• /
• v.22 no.10
• /
• pp.1619-1627
• /
• 2021

Objective: This study used cardiac magnetic resonance imaging (MRI) to compare the characteristics of left ventricular remodeling in patients with primary aldosteronism (PA) with those of patients with essential hypertension (EH) and healthy controls (HCs). Materials and Methods: This prospective study enrolled 35 patients with PA, in addition to 35 age- and sex-matched patients with EH, and 35 age- and sex-matched HCs, all of whom underwent comprehensive clinical and cardiac MRI examinations. The analysis of variance was used to detect the differences in the characteristics of left ventricular remodeling among the three groups. Univariable and multivariable linear regression analyses were used to determine the relationships between left ventricular remodeling and the physiological variables. Results: The left ventricular end-diastolic volume index (EDVi) (mean ± standard deviation [SD]: 85.1 ± 13.0 mL/m² for PA, 75.9 ± 14.3 mL/m² for EH, and 77.3 ± 12.8 mL/m² for HC; p = 0.010), left ventricular end-systolic volume index (ESVi) (mean ± SD: 35.2 ± 9.8 mL/m² for PA, 30.7 ± 8.1 mL/m² for EH, and 29.5 ± 7.0 mL/m² for HC; p = 0.013), left ventricular mass index (mean ± SD: 65.8 ± 16.5 g/m² for PA, 56.9 ± 12.1 g/m² for EH, and 44.1 ± 8.9 g/m² for HC; p < 0.001), and native T1 (mean ± SD: 1224 ± 39 ms for PA, 1201 ± 47 ms for EH, and 1200 ± 44 ms for HC; p = 0.041) values were higher in the PA group compared to the EH and HC groups. Multivariable linear regression demonstrated that log (plasma aldosterone-to-renin ratio) was independently correlated with EDVi and ESVi. Plasma aldosterone was independently correlated with native T1. Conclusion: Patients with PA showed a greater degree of ventricular hypertrophy and enlargement, as well as myocardial fibrosis, compared to those with EH. Cardiac MRI T1 mapping can detect left ventricular myocardial fibrosis in patients with PA.

• Korean Journal of Plant Taxonomy
• /
• v.42 no.3
• /
• pp.215-221
• /
• 2012

Five Korean Calanthe species, C. discolor, C. bicolor, C. sieboldii, C. reflexa, and C. aristulifera, were studied using amplified fragment length polymorphism (AFLP) to assess their taxonomic and genetic relationships. Sixteen accessions belonging to five native Calanthe spp. and mutants with yellow tepal and white lip (YW mutants) were studied. We identified 50 putative markers using AFLP analysis. The results of AMOVA showed that genetic variance was higher between species than within species. Genetic dissimilarity when compared with the rest of the species was the lowest for individuals of the YW mutants and the highest for individuals of C. reflexa. The mutants clustered outside the major group. Calanthe bicolor clustered with C. discolor, suggesting that its genetic composition is closer to that of C. discolor. Though it is suggested to have originated as a result of natural hybridization between C. sieboldii and C. discolor, introgression is likely to have occurred in the direction of C. discolor based on the data of molecular marker, clustering and genetic dissimilarity. Calanthe reflexa and C. aristulifera were genetically the most diverse of the species studied. In conclusion, the results showed that there is genetic diversity in Korean Calanthe species, that C. bicolor introgressed in the direction of C. discolor and that the YW mutants are genetically closer to C. sieboldii.

• Physical Therapy Korea
• /
• v.21 no.1
• /
• pp.37-46
• /
• 2014

Asymmetric sitting posture may cause asymmetric buttock pressure and unilateral low back pain (LBP). The purpose of this study was to compare the differences of buttock pressure between both sides, and pelvic angle (sagittal and coronal planes) during typing in a sitting position on a pressure mat (Baltube) in individuals with and without unilateral LBP. Ten subjects with unilateral LBP and ten subjects without unilateral LBP were recruited for this study. Buttock pressure was measured using a pressure mat and pelvic angles were measured using a palpation meter. The subjects performed typing in a sitting posture for 30 minutes. Pressure data were collected and averaged at initial term (from start to first minutes) and final term (last minutes of 30 minutes). Angles of pelvic tilting were measured after 30 minutes typing. Pressure asymmetry values (difference in pressure between both sides) were calculated at the initial and final terms. A two-way analysis of variance was used to compare the differences between the initial and final pressure asymmetry values in subjects with and without unilateral LBP. An independent t-test was applied to compare the pelvic tilt angles between the two groups. To compare the change of pressure from the initial term to the final term between the symptomatic and asymptomatic sides in the unilateral LBP group, a paired t-test was applied. In the unilateral LBP group, the pressure asymmetric value at the final term was significantly greater than that of the initial term (p<.05). The angle of pelvic tilting in coronal plane was significantly greater in the unilateral back pain group compared to the without unilateral LBP group (p<.05), however, there was no significant difference in the angle of pelvic tilting in the sagittal plane between the two groups (p>.05). In the unilateral LBP group, the change of pressure from the initial term to the final term was significantly less in the symptomatic side (-6.90 mmHg) than the asymptomatic side (5.10 mmHg). This asymmetric sitting posture may contribute to unilateral LBP in the sitting position. Further studies are needed to determine if asymmetric weight bearing in sitting causes unilateral LBP or if unilateral back pain causes asymmetric weight bearing, and if the correction of asymmetric weight bearing in sitting can reduce unilateral LBP.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.4
• /
• pp.301-309
• /
• 2015

Purpose: When the edentulous area is restored by implant prostheses, the opposing hypofunctioned teeth will receive physiologic mechanical stimuli. This study evaluated the bone changes around the maxillary teeth opposing an implant restoration installed in the mandibular posterior area. Materials and Methods: Radiographs of the opposing teeth were taken at prostheses delivery (baseline), 3 and 6 months later. A customized film holding device was fabricated to standardize the projection geometry for the serial radiographs of the opposing teeth. The gray values of the region of interest of each digital image were compared according to time. Repeated measured analysis of variance was performed at the 95% significance level. Results: The gray values of the alveolar bone around the antagonist teeth of implants increased with time. The changes in gray values of the middle area were greater than those of the crestal area. However, the gray values of the mesial and distal areas were not different. The changes in gray values were different according to the unloaded time. Conclusion: A change in bone tissue will occur if a proper physiologic load is again applied to the bone tissues around a hypofunctioned tooth.

• The korean journal of orthodontics
• /
• v.40 no.4
• /
• pp.267-275
• /
• 2010

Objective: The aim of this study was to evaluate and compare the shear bond strength (SBS) and failure-mode of orthodontic buttons bonded to erupted and unerupted teeth with conventional and self-etching adhesive systems. Methods: Eighty-four erupted and 84 unerupted, human third-molar teeth were used. For both groups, the buccal surfaces of each tooth were assigned one of the following type of adhesive systems (n = 12). A, Conventional systems: 1, Transbond XT (3M Unitek, Monrovia, CA, USA); 2, Prime & Bond NT (Dentsply/Caulk, Milford, USA); 3, Single Bond (3M ESPE, Minnesota, USA); and B, Self-etching adhesives; 4, Clearfil SE Bond (Kuraray, Okayama, Japan); 5, Transbond Plus (3M Unitek, Monrovia, CA, USA); 6, Clearfil S3 (Kuraray, Tokyo, Japan); 7, G Bond (GC, Tokyo, Japan). The SBSs of the attachments and the adhesive remnant index (ARI) scores were recorded. Data were analyzed with analysis of variance (ANOVA), independent-sample t-test and chi-square tests. Results: When the SBSs of erupted and unerupted teeth were compared, only the Clearfil-SE Bond and G-Bond were significantly different. Bond strengths of all adhesive systems were higher in unerupted teeth than erupted teeth, except the Single-Bond system. Conclusions: When using conventional adhesives, bonding to erupted and unerupted teeth may not be significantly different. However, clinicians need to take into consideration the types of self-etching systems before usage.

• Journal of Global Scholars of Marketing Science
• /
• v.17 no.1
• /
• pp.23-49
• /
• 2007

The purpose of this study is to investigate the relationships among customer satisfaction, trust, and loyalty and examine the differences and similarities between specialized and general merchandise internet shopping malls concerning the relationships of these key success factors. The structural model is tested with each of the sub-samples(i.e., specialized and general merchandise shopping customers taken separately) and the data from entire data samples(i.e., specialized and general merchandise shopping customers pooled together). The same research model was used in analysing general merchandise, specialized, and integrated internet shopping mall to reveal and compare the casual path constructs. In the analysis of path coefficients composed of separated taken sample, all research hypothesis is accepted and the model's goodness of fit also shows all high. In the basis of the previous empirical test, multiple sample method was used. Properties of the causal paths, including standardized path coefficients, the significance of difference, latent correlations and variance explained for satisfaction, trust and loyalty in the hypothesized model, have similarities in general. This means that the proper structural management concerned with customer satisfaction, trust and loyalty is very crucial for the success of all kinds of internet shopping malls. Following the model test, I conduct a test of integrated model's path coefficients. Statistical results show that all the hypothesis concerned with internet shopping malls were accepted like the separated sample test. Click and mortar companies should clearly understand and articulate the key requirements of shopping mall satisfaction, trust and loyalty and encourage to establish linkage and interactive relationship among the research variables. In addition, internet marketers are required to customize the interaction considering and adapting the patterns of internet shopping malls. Other interesting results concerning the strategies in internet shopping malls strategy are also presented.

• Korean Journal of Agricultural Science
• /
• v.40 no.4
• /
• pp.339-345
• /
• 2013

The objective of this study was to establish genetic evaluation systems with carcass data collected by 68 individual farms from 2007 to 2011 in Pyeongchang area of Kangwon province. All the possible of environment effects were corrected by analysis of variance (ANOVA) to estimate more accurate genetic parameters. Heritabilities and genetic correlations were estimated from carcass data collected from Hanwoo steers(n=10,441) born in Pyeongchang region from 2005 to 2008. Traits evaluated included carcass weight (CWT), eye muscle area (EMA), back fat thickness (BF) and marbling score (MS). As for the mean value and standard deviation for carcass traits, CWT, EMA, BF and MS were 424.5, 92, 13.7 and 5.7. Parameters were estimated using a multiple trait animal model and derivative-free restricted maximum likelihood procedures. Estimated heritabilities for CWT, EMA, BF and MS were 0.30, 0.21, 0.42 and 0.42, respectively. Genetic correlation of CWT with EMA, BF and MS were estimated to 0.24, 0.36 and 0.07, respectively. Genetic correlation of EMA with BF and MS was -0.27 and 0.61, respectively.