• Journal of Korean Academy of Nursing
• /
• v.36 no.6
• /
• pp.950-958
• /
• 2006

Purpose: The purpose of this study was to develop a critical thinking disposition scale for nursing students. Method: The developmental process was construction of a conceptual framework, development of preliminary items, verification of content validity, development of secondary items, verification of construct validity and extraction of final items. The conceptual framework and first preliminary 60 items were obtained through a review of relevant literature and the development of critical disposition scales by 10 researchers who had been studying critical thinking for one year These items were reviewed by five specialists for content validity and finally 55 items were chosen. The data was collected from October 1 to 15, 2004 and was analyzed using factor analysis and Cronbach's $\alpha$ with the SPSS program. The subjects were composed of 560 Bachelor of Science nursing students from 8 nursing schools. Result: There were 35 final items which were sorted into 8 factors. The factors were identified as 'intellectual integrity(6 items)', 'creativity(4 items)', 'challenge(6 items)', 'open-mindedness(3 items)', 'prudence(4 items)', 'objectivity(4 items)', 'truth seeking(3 items)' and 'inquisitiveness(5 items)'. The cumulative percent of variance was 55.107%. The reliability of the scale, Cronbach's alpha was.892 and the factors' ranged from.562-.836. Conclusion: The result of this study could be used for measuring critical thinking dispositions of nursing students. However, for further validity and reliability, repeated research is necessary.

• Imaging Science in Dentistry
• /
• v.50 no.1
• /
• pp.1-7
• /
• 2020

Purpose: This study was performed to evaluate the magnitude of artifacts produced by gutta-percha and metal posts on cone-beam computed tomography (CBCT) scans obtained with different tube currents and with or without metal artifact reduction (MAR). Materials and Methods: A tooth was inserted in a dry human mandible socket, and CBCT scans were acquired after root canal instrumentation, root canal filling, and metal post placement with various tube currents with and without MAR activation. The artifact magnitude was assessed by the standard deviation (SD) of gray values and the contrast-to-noise ratio (CNR) at the various distances from the tooth. Data were compared using multi-way analysis of variance. Results: At all distances, a current of 4 mA was associated with a higher SD and a lower CNR than 8 mA or 10 mA (P<0.05). For the metal posts without MAR, the artifact magnitude as assessed by SD was greatest at 1.5 cm or less (P<0.05). When MAR was applied, SD values for distances 1.5 cm or closer to the tooth were reduced (P<0.05). MAR usage did not influence the magnitude of artifacts in the control and gutta-percha groups(P>0.05). Conclusion: Increasing the tube current from 4 mA to 8 mA may reduce the magnitude of artifacts from metal posts. The magnitude of artifacts arising from metal posts was significantly higher at distances of 1.5 cm or less than at greater distances. MAR usage improved image quality near the metal post, but had no significant influence farther than 1.5 cm from the tooth.

• Journal of Preventive Medicine and Public Health
• /
• v.27 no.4 s.48
• /
• pp.763-776
• /
• 1994

Recent studies reveal that grip forces during the hand-arm vibration are most significant for the genesis of vibration-induced white linger syndrome. Therefore, exerted grip forces and skin temperatures of fingers were regarded as dependent variables in experiments and the effects of grip temperature, noise, pushing force, vibration and the combined effect of vibration and pushing force were studied. The objectives of the present study were, first, to varify and compare the changes of grip force affected by grip temperature, noise, pushing force, vibration and the combined effect of vibration and pushing force and, second, to observe the reaction of finger skin temperature affected by above factors. Forty-six healthy male students ($25.07{\pm}2.85$) participated in five systematically permuted trials, which endured 4 minutes each other. Experiments were executed in a special chamber with an air temperature of 21C. In each experiments, the subjects were exposed to five experiment types: (1) grip force of 25N only, (2) pushing force of 50N, (3) acceleration of vibration $7.1m/sec^2(z-direction)$, (4) pink noise of 95 dB (A) and (5) combination of pushing force 50N and acceleration of vibration $7.1m/sec^2$. A repeated-measures analysis of variance (ANOVA) was performed on the grip force to test whether it was affected by noise, pushing force, vibration and pushing force. The present results show that vibration was significantly related to the increase of grip force, but the other factors, such as pushing force, noise and grip temperature had no signigicant influence on the increase of grip force, and that the reaction of finger skin temperature were significantly affected by the skin temperature at start of experiment and grip temperature, not grip force and other experimental conditions. Therefore, we suggest that the management for decreasing the grip force is meaningful to prevent the occurrence of Hand-arm vibration syndrome (HAVS).

• Journal of Global Scholars of Marketing Science
• /
• v.12
• /
• pp.99-119
• /
• 2003

A model is proposed for the role of emotional intensity of a web site, and the moderating influence of product involvement, in the Integrative Framework of persuasion (Meyers-Levy and Malvaiya 1999). The model also appropriately operationalizes the constructs emotional intensity of a web site and product involvement The three routes to persuasion, Central, Peripheral, and Experiential correspond to high, moderate, and low involvement (Meyers-Levy and Malaviya 1999). The involvement construct is measured from message recipients using the Personal Product Inventory (Pill, which was developed to capture the concept of product involvement (Zaichkowsky 1985). The conceptualization of the Personal Product Inventory is a contextrree measure that also has robust psychometric properties when applied to advertisements (Zaichkowsky 1994). The propositions highlight the expected importance of emotional intensity of a web site. The moderating influence of product involvement is also proposed. Specifically, what this work proposes is that the emotional intensity of a product site has a larger impact on attitude change under low product involvement, as opposed to moderate product involvement. Support for this reasoning can be found in the persuasion literature (Petty et al 1986). The Petty et al (1986) frame work is a dual process descriptive and predictive frame work in the area of altitude formation and change. Recently, Myers Levy and Malaviya (1999) have proposed a tri-process framework. This is in tum based on the dual process model of Petty et al. (1986). The study outlined in this paper aims to deepen the Meyers Levy and Malaviya (1999) and frame work. The propositions outlined in the model are empirically tested using a repeated measures experimental design. The emotional intensity is measured using a scale that is based on experts judgments. Using a paired comparison t-test two sites are determined to be of high and low emotional intensity. The model is tested using a repeated measures experimental design. The first independent variable Emotional Intensity of the site is manipulated. The Second independent variable, Personal Product Inventory is measured. While, the dependent variable, product altitude change will also be measured. Utilizing Analysis of Variance (ANOVA) the data is analyzed using SPSS. The results suggest that besides the rational content of messages their emotional content can also influence attitude change. Specifically, it is proposed that the manipulation of emotional intensity of a product Web site has a greater impact on product altitudes under high and low product involvement conditions, rather than moderate product involvement. However, the results for product involvement as a continuous variable has a p value of 0.09. Further, the results for three levels of product involvement were far from significant. For two levels of product involvement also, the results were insignificant, the p value approached 0.20. This evidence indicates that it is premature to conclude that there are three routes to persuasion. A caveat, however, must be added, in that the manipulations may not have been strong enough to test the proposed hypotheses. Further, undoubtedly, there is unequivocal evidence the emotional intensity of a product Web site, as measured here, has a direct impact on product attitudes.

• Women's Health Nursing
• /
• v.8 no.4
• /
• pp.538-549
• /
• 2002

This study was designed to test the effects of a full body massage on uterine contraction, length of labor, type of delivery, and drug intervention for primipara during labor. Data were collected using a quasi-experiment method (nonequivalent control group, pre-post test design) from November 1, 2001 to July 31, 2002. The subjects of this experiment consisted of 28 women in the experimental group and 29 in the control group, out of 57 primipara hospitalized at the U OB & GYN hospital in Inchon. The experimental group was given a 20 minute full body massage for each of the three delivery phases (latent, active, and transition). The control group was given conventional delivery care. Three (3) parameters were analyzed in this experiment. (1) The interval, duration, and strength of uterine contraction, using an electric tocodynamometer (2) The elapsed time for stage 1 and stage 2 labor. (3) The types of deliveries and drug interventions, using postpartum medical records The data collected were analyzed using the repeated measures analysis of variance (ANOVA), t-test, and $x^2$ test of the SPSS program. The results of the experiment are as follows: 1) Uterine contraction interval was significantly reduced (F=3.210, p=.050). Duration of uterine contraction showed significant increase only during the transition phase (t=-2.319, p=.023). Strength of uterine contraction showed no significant difference. 2) Total length of labor was significantly shortened (t=-5.245, p=.000). The length of 1st stage labor was significantly shortened (t=-5.164, p=.000), with latent phase showing (t=-4.709, p=.000), active phase (t=-2.973, p=.005), and transition phase (t=-2.031, p=.047). The length of 2nd stage labor showed no significant difference. 3) The number of natural deliveries were significantly increased ($x^2$=13.127, p=.004). 4) The number of drug interventions were significantly fewer ($x^2$= 4.493, p=.034). In conclusion, this study shows that a full body massage has a significantly positive effect on uterine contraction interval, length of labor, type of delivery, and drug intervention. Therefore, this study suggests that a full body massage be used clinically to help primipara during labor.

• Restorative Dentistry and Endodontics
• /
• v.42 no.3
• /
• pp.206-215
• /
• 2017

Objectives: To determine the combined effect of fatigue cyclic loading and thermocycling (CLTC) on the shear bond strength (SBS) of a resin cement to zirconia surfaces that were previously air-abraded with aluminum oxide ($Al_2O_3$) particles at different pressures. Materials and Methods: Seventy-two cuboid zirconia specimens were prepared and randomly assigned to 3 groups according to the air-abrasion pressures (1, 2, and 2.8 bar), and each group was further divided into 2 groups depending on aging parameters (n = 12). Panavia F 2.0 was placed on pre-conditioned zirconia surfaces, and SBS testing was performed either after 24 hours or 10,000 fatigue cycles (cyclic loading) and 5,000 thermocycles. Non-contact profilometry was used to measure surface roughness. Failure modes were evaluated under optical and scanning electron microscopy. The data were analyzed using 2-way analysis of variance and ${\chi}^2$ tests (${\alpha}=0.05$). Results: The 2.8 bar group showed significantly higher surface roughness compared to the 1 bar group (p < 0.05). The interaction between pressure and time/cycling was not significant on SBS, and pressure did not have a significant effect either. SBS was significantly higher (p = 0.006) for 24 hours storage compared to CLTC. The 2 bar-CLTC group presented significantly higher percentage of pre-test failure during fatigue compared to the other groups. Mixed-failure mode was more frequent than adhesive failure. Conclusions: CLTC significantly decreased the SBS values regardless of the air-abrasion pressure used.

• Journal of Animal Science and Technology
• /
• v.61 no.2
• /
• pp.69-76
• /
• 2019

Maize which has very high omega-6 fatty acid content has been used as a main feed grain for Hanwoo beef production to increase marbling, and thus omega-6 to omega-3 fatty acids ratio in Hanwoo beef is expected to be biased. To elucidate the current status of omega fatty acids ratio in Hanwoo beef, fatty acid profiles of neutral lipid and phospholipid fraction were analyzed separately using 55 Hanwoo steers' longissimus dorsi muscle slaughtered at Pyeongchang, Korea from Oct. to Nov. 2015. In addition, an association study was conducted to evaluate associations between single nucleotide polymorphism (SNP) markers from references and omega fatty acid profiles in phospholipid of Hanwoo beef samples using analysis of variance (ANOVA). In neutral lipid fraction, composition of saturated and monounsaturated fatty acids was higher and polyunsaturated fatty acids was lower compared to those in phospholipid fraction. The mean n-6/n-3 ratios of Hanwoo were $56.059{\pm}16.180$ and $26.811{\pm}6.668$ in phospholipid and neutral lipid, respectively. There were three SNPs showing statistically significant associations with omega fatty acid content. GA type of rs41919985 in fatty acid synthase (FASN) was significantly associated with the highest amount of C20:5 n-3 (p = 0.031). CC type of rs41729173 in fatty acid-binding protein 4 (FABP4) was significantly associated with the lowest amount of C22:2n-6 (p = 0.047). AG type of rs42187261 in FADS1 was significantly linked to the lowest concentration of C20:4 n-6 (p = 0.044). The total n-6/n-3 ratio of the steer which has all four SNP types in above loci (27.905) was much lower than the mean value of the total n-6/n-3 ratio in phospholipid of the 55 Hanwoo steers ($56.059{\pm}16.180$). It was found that phospholipid and neutral lipid of Hanwoo have very high n-6/n-3 ratios compared to the reported data from different cow breeds. Four SNPs in genes related with fatty acid metabolism showed significant associations with the fatty acid profile of phospholipid and may have potential as SNP markers to select Hanwoo steers in terms of n-6/n-3 balance in the future.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.4
• /
• pp.315-322
• /
• 2013

Purpose: To evaluate the axial displacement of implant-abutment assembly after cyclic loading in internal tapered connection system. Materials and methods: External butt-joint connection implant and internal tapered connection implant were connected with three types of abutment for cement-retained prostheses, i.e. external type abutment (Ext group), internal tapered 1-piece abutment (Int-1 group), and internal tapered 2-piece abutment (Int-2 group). For each group, 7 implants and abutments were used. The implantabutments assemblies were clamped into the implant holder for vertical loads. A dynamic cyclic loading was applied for $150{\pm}10N$ at a frequency of 4 Hz. The amount of axial displacement of the abutment into the implant was calculated at each cycle of 0, 5, 10, 50, 100, 1,000, 5,000, and 10,000. A repeated measures analysis of variance (ANOVA) for the overall effect of cyclic loading and the pattern analysis by linear mixed model were used for statistical analysis. Differences at P<.05 were considered statistically significant. Results: The mean axial displacement after 10,000 cycles were $0.714{\pm}0.488{\mu}m$ in Ext group, $5.286{\pm}1.604{\mu}m$ in Int-1 group, and $11.429{\pm}1.902{\mu}m$ in Int-2 group. In the pattern analysis, Int-1 and Int-2 group showed continuous axial displacement at 10,000 cycles. There was no declining pattern of axial displacement in the Ext group. Conclusion: The pattern of linear mixed model in Ext group showed no axial displacement. There were continuous axial displacements in abutment-implant assemblies in the Int-1 and Int-2 group at 10,000 cycles. More axial displacement was found in Int-2 group than in Int-1 group.

• Korean Journal of Plant Resources
• /
• v.19 no.2
• /
• pp.300-307
• /
• 2006

To clarify the morphological and geographical differentiation among the polyploid complexes of L. lancifolium collections in Korea, the mo게hological variation of 173 accessions were analyzed by ANOVA (one-way analysis of variance) and PCA (principal component analysis) on the basis of 38 morphological characters. 173m accessions were grouped into 78 diploids and 95 triploids by ploid levels and the triploids separated into 75 inland triploids (all around the Korea) and 20 island triploids (Backryung-do and Sochung-do, westemmost and northernmost islands of Korea) by geographic distribution and morphology. Island triploids showed significant morphological differences with inland triploids in ANOVA by many floral and leaf characters. In PCAs, diploids were separated from inland triploids by having longer plant height, smaller flower characters, higher pollen fertility and more stomata. The first four principal components accounted for 44.1% of the total variation. Plots of the island and inland groups for the first and second principal components separated each other with slight overlapping. Although the ploid forms are different between diploid and island triploid, island triploids were more closely overlapped with diploids by principal component 1 and 2 than inland triploids. This reflects that the whole external morphology of island triploids are similar to that of diploids. This, the phenotypic differentiation between inland and island triploids seems to be partly related to their geographical origins.

• Economic and Environmental Geology
• /
• v.38 no.4 s.173
• /
• pp.435-450
• /
• 2005

The purpose of the study is to analyze the hydrogeochemical characteristics by multivariate statistical method, to interpret the hydrogeochemical processes for the new variables calculated from principal components analysis (PCA), and to infer the groundwater flow and circulation mechanism by applying the geostatistical methods for each element and principal component. Chloride and nitrate are the most influencing components for groundwater quality, and the contents of $NO_3$ increased by the input of agricultural activities show the largest variation. The results of PCA, a multivariate statistical method, show that the first three principal components explain $73.9\%$ of the total variance. PC1 indicates the increase of dissolved ions, PC2 is related with the dissolution of carbonate minerals and nitrate contamination, and PC3 shows the effect of cation exchange process and silicate mineral dissolution. From the results of experimental semivariogram, the components of groundwater are divided into two groups: one group includes electrical conductivity (EC), Cl, Na, and $NO_3$, and the other includes $HCO_3,\;SiO_2,$ Ca, and Sr. The results for spatial distribution of groundwater components showed that EC, Cl, and Na increased with approaching the coastal line and nitrate has close relationship with the presence of agricultural land. These components are also correlated with the topographic features reflecting the groundwater recharge effect. The kriging analysis by using principal components shows that PC 1 has the different spatial distribution of Cl, Na, and EC, possibly due to the influence of pH, Ca, Sr, and $HCO_3$ for PC1. It was considered that the linear anomaly zone of PC2 in western area was caused by the dissolution of carbonate mineral. Consequently, the application of multivariate and geostatistical methods for groundwater in the study area is very useful for determining the quantitative analysis of water quality data and the characteristics of spatial distribution.