• Physical Therapy Korea
• /
• v.11 no.3
• /
• pp.11-18
• /
• 2004

This study is aimed at investigating the influence of different quantitative knowledge of results on the measurement error during lumbar proprioceptive sensation training. Twenty-eight healthy adult men participated and subjects were randomly assigned into four different feedback groups(100% relative frequency with an angle feedback, 50% relative frequency with an angle feedback, 100% relative frequency with a length feedback, 50% relative frequency with a length feedback). An electrogoniometer was used to determine performance error in an angle, and the Schober test with measurement tape was used to determine performance error in a length. Each subject was asked to maintain an upright position with both eyes closed and both upper limbs stabilized on their pelvis. Lumbar vertebrae flexion was maintained at $30^{\circ}$ for three seconds. Different verbal knowledge of results was provided in four groups. After lumbar flexion was performed, knowledge of results was offered immediately. The resting period between the sessions per block was five seconds. Training consisted of 6 blocks, 10 sessions per one block, with a resting period of one minute. A resting period of five minutes was provided between 3 blocks and 4 blocks. A retention test was performed between 10 minutes and 24 hours later following the training block without providing knowledge of results. To determine the training effects, a two-way analysis of variance and a one-way analysis of variance were used with SPSS Ver. 10.0. A level of significance was set at .05. A significant block effect was shown for the acquisition phase (p<.05), and a significant feedback effect was shown in the immediate retention phase (p>.05). There was a significant feedback effect in the delayed retention phase (p<.05), and a significant block effect in the first acquisition phase and the last retention phase (p<.05). In conclusion, it is determined that a 50% relative frequency with a length feedback is the most efficient feedback among different feedback types.

• Journal of Animal Science and Technology
• /
• v.48 no.6
• /
• pp.759-766
• /
• 2006

This study was conducted to investigate the genetic correlations among the traits used to select young bulls and proven bulls in Hanwoo Performance and Progeny Test Program in Korea. For the estimation of heritabilities and correlations among the growth traits of bulls and carcass traits of progeny steers, 2,532 records of performance tested bull calves and 1,819 records of progeny tested steers were collected from Livestock Improvement Main Center (LIMC), National Agricultural Cooperative Federation (NACF). Fixed effects of mixed model for each traits were selected by using stepwise regression analysis and prior values of variance components were estimated by MTDFREML. The prior values of variance components were estimated with pairwise 2 traits model followed by single trait analysis. The estimated heritability of backfat thickness(BF), dressing percentage(DP), loin-eye muscle area(LMA), marbling score(MS) and weight at 12 months(WT12) was 0.51, 0.32, 0.27, 0.33, 0.50 and 0.26, respectively. Genetic correlation of WT12 of bull calves with backfat thickness, carcass weight and loin-eye muscle area of steers was positive correlation as 0.05, 0.35 and 0.21, respectively. However genetic correlation of WT12 with DP and MS showed negative correlation as 󰠏0.09 and 󰠏0.27, respectively and these negative genetic correlations implies that bulls that may be superior in carcass traits can be lost at the first step of selection and current selection method should be modified to solve this problem.

• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.183-191
• /
• 2008

This study evaluated influence of the loading head dimension on characteristics of deformation strength ($S_D$) of asphalt mixtures. Kim test and Wheel tracking (WT) test were conducted to evaluate $S_D$ characteristics with relation to WT results for various mixtures. The $S_D$ values and coefficient of variation of $S_D$ values of r=10mm were smaller than those of r=10.5mm. It was also found that $S_D$ values obtained using r=10mm loading head showed high correlations with rut parameters of WT test. It was indicated that the aggregate size and radius (r) of round cut were statistically significant variables on $S_D$ at = 0.05 level in the analysis of variance. However, in interaction of r and aggregate size showed no significance within $10{\sim}19mm$ aggregate size at the same level. Therefore, it was concluded that the diameter (D) of 40mm and the bottom edge radius (r) of 10mm was suitable dimension of loading head for deformation strength test.

• Journal of Korean Academy of Nursing
• /
• v.26 no.1
• /
• pp.94-106
• /
• 1996

Nursing literature suggests that the self-concept of nurses gives an important implications to educators and administrators as well as clinicians for their professional development. With a view to exploring how nurses view themselves, the Professional Self-Concept of Nurses Instrument (PSCNI) using 27 Likert items was developed by Arthur in Australia in 1990. This study is an extension of the PSCNI using Korean samples with some modifications. A convenience sample was drawn from 800 nurses working in three university hospitals in Seoul ; three university hospitals in Kyonggi-do and a university hospital and a psychiatric hospital in Kangwon-do. Seven hundred questionnaires were analyzed using the statistical analysis system(SAS). The reliability of the scale was tested by test-retest and Cronbach's alpha. Differences in the PSCNI, which are closely related to demographic variables, were examined by t-test, ANOVA and the Duncan's multiple range test. Factor analysis was employed so as to examine component factors. The results are summarized as follows : 1. The test-retest reliability of the PSCNI was .79 and Cronbach's alpha was .85. Item correlations with total revealed consistent correlations and subscale reliability varied from .49 to .85. 2. The average score of PSCNI was 75.21 and average item score was 2.79. 3. Twenty four items were derived from the PSCNI 27 items and these items clustered in three component factors. The cumulative percent of variance was 38.12％ and for factor 1 was 22.81％, for factor 2, 9.79％ and for factor 3, 5.51％ respectively 4. A comparison of the scores for the dimensions of the PSCNI shows a relative difference in terms of mean item scores and in descending order, professional practice（m=2.83）, communication （m=2.82） and satisfaction（m=2.70）. 5. Professional self-concept of nurses was found to vary significantly according to age（P=.0001）, religion（P=.0001）, academic background（P= .0109）, marital status（P=.0001）, career（P= .0001） and position（P=.0001）. In conclusion, there was a correlation between professional self-concept of nurses, and life and work variables. This study provides an important message for administrators and nurse educators by highlighting factors which can be addressed by education programs, staff development and appraisal. While the test results largely confirm the Australian and Canadian tests, further research is necessary to improve the cumulative percent of variance instead of applying Arthur's PSCNI directly to Korean nurses.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1D
• /
• pp.141-148
• /
• 2011

City of Incheon opened rapid transit(urban railroad line 1) in 1999 in order to relieve traffic congestion on major arterials. This research analyzed urban space changes of each station influenced area by examining the changes of residents, industrial employees, and floor area ratios before and after the open of Incheon urban railroad line 1. Analysis of variance was applied to change of station influence area. This research found out that the types of central business and agricultural station influence area had been changed significantly after the open of urban railroad. However, the residential, semi-residential, and suburban type of station influence area had not been changed after the open of urban railroad. Thus, it is necessary to provide diverse facilities for inducing residents and employees to the station influence area of residential and semi-residential. Furthermore, the suburban type of station influence area which is difficult to develop naturally by the law of Green Belt is needed to develop station influence area simultaneously with the construction of a station building.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7820-7830
• /
• 2015

Korean households' demand for food consumed away from home is on the steady increase. The ratio of eating-out expenditure of the household income, however, tends to decrease recently irrespective of income groups. This paper, therefore, aims to analyse the food-away-from-home expenditures of salary and wage earners' households by income decile group. The eating-out expenditure is modelled as a function of household income and then estimated using econometric methods such as regression, rolling regression, impulse response, and variance decomposition of forecast error. The regression results indicate that the higher the income decile group is, the lower the income elasticity of eating-out expenditure is, and the high income groups enjoy seasonal eating-out, the low groups do not. The coefficients of dynamic rolling regression are much smaller than those of static one, meaning that households tend to decrease the eating-out expenditure of their income. The impulse response analysis suggests that the eating-out expenditure increase of higher income groups lasts long relative to that of lower income groups. The variance decomposition, also, shows that household income plays much more important role in determining eating-out expenditure at the higher income groups than at the lower income groups.

• Economic and Environmental Geology
• /
• v.29 no.6
• /
• pp.713-724
• /
• 1996

The time-series resident solute concentrations, monitored at two field plots using the automated 144-channel TDR system by Kim (this issue), are used to investigate the dominant transport mechanism at field scale. Two models, based on contradictory assumptions for describing the solute transport in the vadose zone, are fitted to the measured mean breakthrough curves (BTCs): the deterministic one-dimensional convection-dispersion model (CDE) and the stochastic-convective lognormal transfer function model (CLT). In addition, moment analysis has been performed using the probability density functions (pdfs) of the travel time of resident concentration. Results of moment analysis have shown that the first and second time moments of resident pdf are larger than those of flux pdf. Based on the time moments, expressed in function of model parameters, variance and dispersion of resident solute travel times are derived. The relationship between variance or dispersion of solute travel time and depth has been found to be identical for both the time-series flux and resident concentrations. Based on these relationships, the two models have been tested. However, due to the significant variations of transport properties across depth, the test has led to unreliable results. Consequently, the model performance has been evaluated based on predictability of the time-series resident BTCs at other depths after calibration at the first depth. The evaluation of model predictability has resulted in a clear conclusion that for both experimental sites the CLT model gives more accurate prediction than the CDE model. This suggests that solute transport at natural field soils is more likely governed by a stream tube model concept with correlated flow than a complete mixing model. Poor prediction of CDE model is attributed to the underestimation of solute spreading and thus resulting in an overprediction of peak concentration.

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.1
• /
• pp.45-63
• /
• 2019

Until recently, most people have invested in a traditional portfolio consisting of stocks, bonds and real estates based on the three-division method of properties in Korea. However, this study analyzed the impact of the composition of a portfolio combining representative real estate indirect investment products such as Reits and real estate funds on the investment performance. For this purpose, the empirical analysis using the mean variance model, which is the most appropriate method for the portfolio composition, was used. For variables used in this study, mixed asset portfolios were classified into Portfolio A through Portfolio G depending on the composition of assets, and the price indices selected as Kospi, Krx bond, Reits Trus Y7, Hanwha-Lasal fund, and Office (Seoul). The results are as follows; first Portfolio D, which combined bonds, stocks, Reits and Real Estate funds, and Portfolio G, which added the office, the actual real estate, were shown to have the lowest risk. second, Portfolio B composed of bonds, stocks and Reits and Portfolio D with added real estate funds had the lowest risk while Portfolio F composed of bonds, stocks, offices and real estate funds, and Portfolio G with added Reits were the most profitable. As a result, it has been analyzed that it was more effective to compose a portfolio including Reits and real estate funds, which were real estate indirect investment products that eliminated the illiquidity limitation of real estates than real estates, the traditional three-division method of properties. Therefore, it is possible to minimize the risk of investors and reduce the cost of ownership of the real estate by solving the illiquidity problem that is the biggest disadvantage of the direct investment, In addition, it is considered that it is more necessary to reinvigorate the real estate indirect investment market where small amounts can be invested.

• Journal of Navigation and Port Research
• /
• v.43 no.1
• /
• pp.1-8
• /
• 2019

Identifying behavioral errors of seafarers that have led to marine accidents is a basis for research into prevention or mitigation of marine accidents. The purpose of this study is to estimate the optimal probability distribution function needed to model behavioral errors of crew members into three behaviors (i.e., Skill-, Rule-, Knowledge-based). Through use of behavioral data obtained from previous accidents, we estimated the optimal probability distribution function for the three behavioral errors and verified the significance between the probability values derived from the probability distribution function. Maximum Likelihood Estimation (MLE) was applied to the probability distribution function estimation and variance analysis (ANOVA) used for the significance test. The obtained experimental results show that the probability distribution function with the smallest error can be estimated for each of the three behavioral errors for eight types of marine accidents. The statistical significance of the three behavioral errors for eight types of marine accidents calculated using the probability distribution function was observed. In addition, behavioral errors were also found to significantly affect marine accidents. The results of this study can be applied to predicting marine accidents caused by behavioral errors.

• Journal of Life Science
• /
• v.33 no.3
• /
• pp.268-276
• /
• 2023

This study was conducted to optimize the formulation conditions of the immediate-release layer of carvedilol in the development of a two-layer tablet formulation for carvedilol and ivabradine. Using a 2⁴+3 full-factorial design of experiments, excipients (microcrystalline cellulose, citric acid, and crospovidone) of the carvedilol immediate-release layer (wet granulation part) and process parameters for the tablet compression process (main compression) were optimized, and seven types of each dependent variable (assay, content uniformity, hardness, friability, disintegration, and dissolution [pH 1.2 and 6.8]) were evaluated using design expert software. The analysis of variance results confirmed that the main compression has a significant effect on hardness, friability, and disintegration time and that microcrystalline cellulose has a major effect on friability and dissolution. In addition, it was confirmed that citric acid has a significant effect on friability. Crospovidone affects friability and dissolution. According to the design space from the design of the experiment results, the optimized range is microcrystalline cellulose (~18.0-32.0 mg), citric acid (~0.5-12 mg), and main compression (~615-837 kgf). Consequently, this study confirmed the availability of manufacturing the carvedilol immediate-release layer in which all risk factors evaluated in the initial risk assessment are removed.