• Journal of Home Health Care Nursing
• /
• v.23 no.2
• /
• pp.129-138
• /
• 2016

Purpose: The purpose of this study was to examine the relationships between resilience, family support, and hopelessness, as well as to identify the effects of resilience and family support on the hopelessness of elderly inpatients in general hospitals. Methods: A total of 177 elderly persons were recruited from three general hospitals. Data were analyzed using descriptive statistics, t-tests, ANOVA, Pearson;s correlation coefficient, and multiple regression analysis. Results: The score on the hopelessness of hospitalized elderly persons was $2.88{\pm}0.88$ (range: 1-5). Multiple regression analysis results showed that participants; hopelessness was significantly influenced by resilience and family support, explaining 35.4% of the total variance. Conclusion: Based on the findings of this study, there is a need for the development of a resilience and family support program, aimed at reducing hopelessness among elderly persons, in order to promote their mental health.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.2
• /
• pp.141-149
• /
• 2014

PURPOSE: This study uses X-rays investigate how university students' smart phone use affects the cervical vertebral angle. METHODS: Ninety-two randomly selected students agreed to participate in this study. The participants' number of hours of smart phone use was gathered using a questionnaire. An X-ray of the participants' cervical vertebrae was taken, and the cervical vertebral angle was measured using the Cobb and the absolute rotation angle (ARA) method. Also, the relation between pain and hours of smart phone use was identified using a visual analog scale (VAS). Using SPSS ver18, the relationships among the cervical vertebral angle and the items in the questionnaire were identified and a frequency analysis, an independent t-test, and the analysis of variance (ANOVA) were calculated. RESULTS: The study showed that an increase in the number hours of smart phone per day led to cervical lordosis(p<0.05). The relationships between points of smart phone addiction and cervical vertebral angle have a negative correlation (p<0.05). Therefore, there are the higher smart phone addiction points, the decrease the cervical vertebral angle. CONCLUSION: The results of the study showed that increase in smart phone use lead to cervical lordosis, and smart phone addiction scores resulted in decreased in the cervical vertebral angle.

• Korean Journal of Remote Sensing
• /
• v.37 no.4
• /
• pp.665-685
• /
• 2021

This study focused on the a 20-year evaluation of the dynamism of critical thermal anomalies in Busan metropolitan area prompted by unusual infrastructural development and demographic growth rate. Archived Landsat thermal data derived-LST was the major input for UTFVI and hot spot analysis (Getis-Ord Gi^*). Results revealed that the surface urban heat island-affected area has gradually expanded overtime from 23.32% to 32.36%; while the critical positive thermal anomalies (level-3 hotspots) have also spatially increased from 19.88% in 2000 to 23.56% in 2020, recording a net LST difference of > 5℃ between the maximum level-3 hotspot and minimum level-3 coldspot each year. It is been observed that thermal conditions of Busan have gradually deteriorated with time, which is potentially inherent in the rate of urban expansion. Thus, this work serves as an eye-opener to powers that be, to think and act constructively towards a sustainable thermal conform for city dwellers.

• Nutrition Research and Practice
• /
• v.15 no.sup1
• /
• pp.79-93
• /
• 2021

BACKGROUND/OBJECTIVES: The purpose of this study was to examine the effects of knowledge about coronavirus disease 2019 (COVID-19), attitude, subjective norm, and perceived behavioral control on behavioral intentions to practice COVID-19 preventive behaviors using the theory of planned behavior (TPB). SUBJECTS/METHODS: A total of 519 restaurant customers' responses was collected in this study through an online self-administered questionnaire. Descriptive statistical analysis was performed on socio-demographic factors. One-way analysis of variance and t-test were conducted to determine differences in the constructs from the TPB according to age and sex. The hypotheses were tested using structural equation modeling (SEM). RESULTS: SEM revealed the positive effect of knowledge about COVID-19 on attitude, subjective norm, and perceived behavioral control to prevent the spread of COVID-19 in restaurants. Attitude, subjective norm, behavior intention, and knowledge positively affected COVID-19 preventive behavior intentions in restaurants. CONCLUSIONS: The results of this study confirmed that the TPB is helpful in elucidating the determinants of consumers' intention to practice COVID-19 preventive behavior in restaurants. These findings can help policy makers and professionals provide material for further public health interventions and inform them about awareness-raising, guidelines, and health education programs.

• Journal of Navigation and Port Research
• /
• v.46 no.2
• /
• pp.92-98
• /
• 2022

Maritime accidents result in enormous economic loss and loss of life; thus, such accidents must be prevented, and risks must be managed to prevent these occurrences Risk management must be based on statistical evidence such as variables. Because calculating when variables increase statistically can be difficult, compressing the designated variables is necessary to use the maritime accident data in Korea. Thus, in this study, variables of marine accident data are compressed using statistical methods. The date, ship type, and marine accident type included in all maritime accident data were extracted, the number of optimal variables was confirmed using the hierarchical clustering analysis method, and the data were compressed. For the compressed variables, the validity of the data use was statistically confirmed using analysis of variance, and the data of the variables identified using the variable compression method were designated. Consequently, among the monthly and yearly data, statistical significance was confirmed in yearly data, and compression was possible. The significance of the data was confirmed in six and eight types of ships and accidents, respectively, and these were compressed. These results can be directly used for prevention or prediction based on past maritime accident data. Additionally, the data range extracted from past maritime accidents and the number of applicable data will be studied in the future.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_2
• /
• pp.1037-1045
• /
• 2022

In this study, nanoscale Al₂O3 ceramic particles were used due its exceptionally high hardness characteristics, chemical stability, and wear resistance properties. These nanoparticles will be used to investigate the optimal process conditions for the electro co-deposition of the Ni-Al₂O₃ composite coatings. A Watts bath electrolytic solution of a controlled composition along with a fixed agitation speed was used for this study. Whereas the current density, the pH value, temperature and concentration of the nano Al₂O₃ particles of the electrolyte were designated as the manipulative variables. The experimental design method was based on the orthogonal array to find the optimum processing parameters for the electro co-deposition of Ni-Al₂O₃ composite coatings. The result of confirmation experimental based on the optimal processing condition through the analysis of variance ; EDX analysis found that the ratio of alumina increased to 8.65 wt.% and subsequently the overall hardness increased to 983 Hv. Specially, alumina were evenly distributed on Nickel matrix and particles were embedded more firmly and finely in Nickel matrix.

• Corrosion Science and Technology
• /
• v.21 no.4
• /
• pp.314-324
• /
• 2022

The objective of this investigation was to indentify major factors affecting surface roughness among various parameters of electropolishing process using the design of an experiment method (full factorial design) for UNS S31603. Factors selected included electrolyte composition ratio, applied current density, and electrolytic polishing time. They were compared through analysis of variance (ANOVA). Results of ANOVA revealed that all parameters could affect surface roughness, with the influence of electrolyte composition ratio being the highest. As a result of surface analysis after electropolishing, the specimen with the deepest surface damage was about 35 times greater than the condition with the smallest surface damage. The largest value of surface roughness after electropolishing was higher than that of mechanical polishing due to excessive processing. On the other hand, the smallest value of surface roughness after electropolishing was 0.159 ㎛, which was improved by more than 80% compared to the previous mechanical polishing. Taken all results together, it is the most appropriate to perform electrolytic polishing with a sulfuric acid and phosphoric acid ratio of 3:7, an applied current density of 300 mA/cm², and anelectrolytic polishing time of 5 minutes.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.6
• /
• pp.74-82
• /
• 1997

We provide a set of information on technologies to draw meaningful action plans for the internationalization on National R&D activities. In this study, we employed a modiffed Delphi method to evaluate levels of our technological capabilities and developed countries as well. We investigated technology acquis- tion methodologies, technology characteristics and various aspects of international cooperation in terms of technology. Then, we analyzed final responses of participants (i.e., the third round results of Delphe method) to see the correlation among various factors in developing technologies through international R&D cooperation. The technology classification used in this research was developed by STEPI (Science and Technology Policy Institute). In conclusion, levels of our technologies were investigated to be between the stage of imi- tating/absorbing advanced thechnologies and the stage of digesting acquired technologies. Especially, com- paring with other technologies, mechanical engineering was evaluated to be almost near the stage of digesting acquired technology(the middle level stage of technology). Our overal technological capabilities were evaluated to be 40 .approx. 60% of top level countries.

• Journal of Korean society of Dental Hygiene
• /
• v.23 no.5
• /
• pp.403-410
• /
• 2023

Objectives: To confirm the awareness of child abuse and attitudes toward mandatory reporting among dental hygiene students in the Gwangju and Jeonnam regions. Methods: The level of awareness of child abuse according to general characteristics, attitudes toward reporting obligation, and awareness of the mandatory reporting system were analyzed using t-test or one-way analysis of variance (ANOVA) analysis, and correlation was analyzed using Pearson correlation coefficient. Results: Awareness of child abuse was 3.76, 3.68, 3.67, and 3.18 points for neglect, sexual abuse, physical, and emotional abuse, respectively. The attitude toward reporting obligation were 3.60 and 2.62 points for positive and negative reporting attitudes, respectively. Regarding awareness of child abuse, a significant positive correlation was observed between positive reporting attitude (r=0.326, p<0.01) and awareness of mandatory reporting system (r=0.272, p<0.01). Conclusions: To increase the reporting rate among dental hygienists, awareness should be improved starting from the undergraduate level, perceptions of prospective dental hygienists should be reflected in the development and direction of educational programs, and it is necessary to increase accessibility to educational opportunities and continuously seek institutional and policy measures.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.08a
• /
• pp.71-71
• /
• 2020

Xanthoceras sorbifolia Bunge, the sole species in the genus Xanthoceras, is a flowering plant in the family Sapindaceae. It is an important tree species being a source of edible oil and biodiesel with a capacity as a pioneer of degraded and desert land. Seeds of X. sorbifolia were collected from two plantations and two superior trees in Inner Mongolia; and one plantation and one superior tree in Liaoning, China. An inter simple sequence repeat (ISSR) analysis showed genetic variation among four artificial populations in China: two in Inner Mongolia (IM), one in Liaoning (LN), and one in Shandong (SD). The average percentage of polymorphic loci was 81.25 % for these four populations. Based on an analysis of molecular variance, 23 % of the total genetic variation was found among populations, and 77 % within populations. Traits of seeds varied considerably between and among areas, for example two trees produced quite different seeds in several traits although they are adjacent to each other in the same farm. As much attention has not been paid to the traits of seeds, there should be a genetic test to understand this variation. It is necessary to obtain information on seed characteristics first and then provide basic information for further research on the selection of superior trees and provenances.