• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.1
• /
• pp.83-89
• /
• 2014

Purpose : In case of the intensity modulated radiation therapy (IMRT) using Tomotherapy and linear accelerator (Linac), it was to compare and to evaluate the imaging dose of MVCT and CBCT that were performed daily for the correct set up of the patient. Materials and Methods : The human body model Phantom (Anderson rando Phantom, USA) was divided into the three parts as Head, Thorax, pelvis, and after GafChromic EBT3 film cut to the size of $0.5{\times}0.5cm2$.in the center of the recording area were situated on the ant, post, left, and right surface of the phantom and 2cm in depth from the ant, post, left, right, and center surface of the phantom, the surface dose and inner dose were measured repeatedly three times, respectively, using the tomotherapy (Hi Art) and the OBI of NovalisTx. The measured film calculated the output value by RIP version6.0 and then the average value of the dose was calculated by the one-way analysis of variance. Results : Using the human body model phantom, the results of MVCT and CBCT performance were that measurements of MVCT inner dose were showed $15.43cGy{\pm}6.05$ in the head, $16.62cGy{\pm}3.08$ in the thorax, $16.81cGy{\pm}5.24$ in the pelvis, and measurements of CBCT inner dose were showed $13.28{\pm}3.68$ in the head, from $13.66{\pm}4.04$ in the thorax, $15.52{\pm}3.52$ in the pelvis. The measurements of surface dose were showed in case of MVCT performance, $11.64{\pm}4.05$ in the head, $12.16{\pm}4.38$ in the thorax, $12.05{\pm}2.71$ in the pelvis, and in case of CBCT performance, $14.59{\pm}3.51$ in the head, $15.82{\pm}2.89$ in the thorax, $17.48{\pm}2.80$ in the pelvis, respectively. Conclusion : In case of Inner dose, the MVCT using MV energy showed higher than the CBCT using kV energy at 1.16 times in the head, at 1.22 times in the thorax, at 1.08 times in the pelvis, and in case of surface dose, the CBCT was higher than MVCT, at 1.25 times in the head, at 1.30 times in the thorax, at 1.45 times in the pelvis. Imaging dose was a small amount compared to the therapeutic dose but it was thought to affect partially to normal tissue because it was done in daily schedule. However, IMRT treatment was necessarily parallel with the IGRT treatment through the image-guide to minimize errors between planned and actual treatment. Thus, to minimize imaging dose that the patients receive, when planning the treatment, it should be set up a treatment plan considering imaging dose, or it must be performed by minimizing the scan range when shooting MVCT.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.27 no.2
• /
• pp.27-47
• /
• 1997

The purpose of this study was to evaluate the accuracy and usefulness of spiral tomography through the comparison and analysis of SCANORA cross-sectional tomographs and DentaScan computed tomographic images of dry mandibles taken by a SCANORA spiral tomographic machine and a computed tomographic machine. Thirty-one dry mandibles with full or partial edentulous areas were used. To evaluate the possible effect of location in the edentulous area, it was divided into 4 regions of Me (region of mental foramen), MI (the midportion between Me and M2), M2 (the midportion between mental foramen and mandibular foramen) and S (the midportion of the mandibular symphysis). A ZPC column (sized 4 mm x 5 mm) was seated on the edentulous regions of Me, MI, M2 and S using the acrylic stent. Then SCANORA spiral tomography and computed tomography were taken on the edentulous regions which contained the ZPC column. The ZPC columns and cross-sectional images of the mandible were measured in the radiographs by three observers and the differences between the two imaging modalities were analysed. The results were as follows: 1. In comparing the actual measurements of the ZPC column and measurements in the radiographs, the mean error of the DentaScan computed tomography was 0.07 mm in vertical direction and -0.06 mm in horiwntal direction, while the mean error of the SCANORA spiral tomography was 0.06 mm in vertical direction and -0.12 mm in horizontal direction. There was a significant difference between the two radiographic techniques in the horizontal measurement of the ZPC column of the symphysis region (p<0.05). But there was no significant difference in the measurements of other regions (p>0.05). 2. In measurements of the distance from the alveolar crest to the inferior border of the mandible (H), and of the distance from the alveolar crest to the superior border of the mandibular canal (Y), there was no significant difference between the two radiographic techniques (p>0.05). 3. In measurements of the distance from the lingual border of the mandible to the buccal border of the mandible (W), and of the distance from the lingual border of the mandible to the lingual border of the mandibular canal (X), there was a significant difference between the two radiographic techniques in measurements of the midportion between the mental foramen and the mandibular foramen (M2) (p<0.05). But there were no significant differences in measurements of the other regions of symphysis (S), mental foramen (Me), the first one-fourth portion between the mental foramen and the mandibular foramen (M1) (p>0.05). 4. Considering the mean range of measurements between observers, the measurements of SCANORA spiral tomography showed higher value than those of DentaScan computed tomography, except in measurements of symphysis (S). 5. On the detectability of the mandibular canal, there was no significant difference between the two radiographic techniques (p>0.05). In conclusion, SCANORA spiral tomography demonstrated a higher interobserver variance than that of DentaScan computed tomography for implant site measurements in the posterior edentulous area of the mandible. These differences were mainly the result of difficulty in the detection of the border of the mandible in SCANORA spiral tomography. But considering the cost and the radiation exposure, SCANORA spiral tomography can be said to be a relatively good radiographic technique for implant site measurement.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.2
• /
• pp.88-93
• /
• 2011

Purpose: As to analytical method of data, the AutoQUANT software in which it is used quantitative rating of the myocardial perfusion SPECT are reported that there is a difference. Therefore the measured value error of the mutual program is expected to be generated even if the quantitative analysis is made data of the same patient. The purpose of this study is to offer the comparative analysis of myocardial extract method in Quantitative Perfusion SPECT. Materials and methods: We analyzed the 51 patients who were examined by Tc-99m MIBI gated myocardial SPECT in nuclear medicine department of Pusan National University Hospital from June to December 2010(34 men, 17 women, mean age $66.5{\pm}9.9$). We acquired the extracted image in myocardial extract protocol. QPS program that uses the AutoQUANT software measured TID(Transient Ischemic Dilation), ESD(Extent of Stress Defect), SSS(Summed Stress Score). Then analyzed the results. Results: The correlation of appyling myocardial extract is TID(r=0.98), ESD(r=0.99), SSS(r=0.99). In the 95% confidence limit, there was no satistically significant difference(TID p=0.78, ESD p=0.31, SSS p=0.19). After blinding test with a physician for making a qualitative analysis, there was no difference. Conclusion: Quantitative indices in QPS program showed good correlation and the results showed no statistically signigicant difference. The variance between method was small. therefore, the functional parameters by each method can be used interchangeably. Also, we expect patient's satisfaction.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.37 no.4
• /
• pp.60-72
• /
• 2019

The purpose of this study was to identify detailed factors that affect visitor satisfactions of the plants on display, environments of pedestrian road and facility of each theme garden by conducting a survey of visitors to Jade Garden. The 400 data including 100 copies per theme garden were used for statistical analysis. The statistical techniques used in the survey analysis include multi-regression analysis, t-test, and analysis of variance(ANOVA). As a result of the analysis, most of theme gardens tended to have the greatest impact on the satisfaction of the plants on display and the lowest level of facility satisfaction. According to detailed factors analysis of the satisfaction of plants on display satisfaction of plant diversity and the method of plant display were most affected in most of the theme gardens. Among them, promoting the satisfaction of plant diversity is necessary to plant various species, but in case of Ginkgo Maze Garden, a type of tree community as one tree(Ginkgo biloba), the satisfaction of plants diversity did not show a rising-up value. Therefore, it was confirmed that the appropriate degree of plants diversity depends on the theme or environment of the garden. In the case of the pedestrian-road-satisfaction, the width of the pedestrian road was the most affected, It was analyzed that whether the point of intersection can be easily available during peak season has a significant impact on the satisfaction of visitors. In the case of facility satisfaction, it was analyzed that the presence of rest and convenience facilities had the most direct influence on visitors, so the facility diversity had the greatest influence. Therefore, it is necessary to more systematically categorize and consider the influential detailed factors such as plants diversity and methods of plant display, width of pedestrian road and facilities diversity for the management and development of the arboretum.

• Korean Journal of Occupational Health Nursing
• /
• v.7 no.1
• /
• pp.5-19
• /
• 1998

This descriptive-correlational study was conducted to identify the major factors affecting health promoting behaviors. 344 workers who employed in four different manutacturing plants in Taegu and Kyungbuk area were selected by convenience sampling method. Data were collected from April let to April 18th, 1998 by ready structured questionaires. The purpose of this study was to offer the basic data for health promotion theory development and health promotion strategy planning. This study was based on Pender's Health Promotion Model and examined three variables health promoting behavior, self-concept and perceived importance of health. The Life Style and Health Habit Assessment scale(LHHA) developed by Pender(1982).The Self-concept scale developed by Choi(1972) and the Health Value scale developed by Wallston, Maides and Wallston(1980) were used for this study. Data was analyzed by percentage, mean. t-test. ANOVA, Pearson Correlation Coefficient, and Stepwise Multiple Regression. The major findings of this study are as follows ; 1. The average level of health promoting behavior practice was 63.2% and possible range was from 62 to 248 point. The mean score of respondent's positive self-concept was 75.8. 81.4% of respondents put a high priority on the importance of health. 2. There was a significant difference between the practice level in the category of general self care and less amount of working hours per day(P=0.000), less amount of working hours per week(P=0.000). There was a significant difference between the practice level in the category of nutrition and age(0.002), marital status(0.000), working hour per day(0.008), working hours per week(0.001), There was a significant difference between the practice level in the category of nutriton and sex(0.000), age(0.000), marital status(0.025), education level(0.000), working hours per day(0.002), working hours per week(0.006). There was a significant difference between the practice level in the category of sleep and rest and age(0.003), marital status(0.002), working hours per day(0.001), working hours per week(0.001). There was a significant difference between the practice level in the category of stress management and working hours per day(0.001), working hours per week(0.002). There was a significant difference between the practice level in the category of self-actualization and working hours per day(0.050). 3. General characteristics influencing the respodent's self-concept were level(P=0.009) and worksite(P=0.001). 4. The results of the hypothesis tests are as follows The first hypothesis, that "The respondent who have more positive self-concept will have higher scores in the practice of health promoting behavior." was supported(r=0.2973, P=0.0001). The second hypothesis that "The respondent who have higher perception level on importance of health will have higher scores in the practice health promoting behavior." was rejected(r=- 0665, P=0.2225). 5. The most important factor that affects health promoting behavior practice was working hours per week(6.0%). The combination of working hours per week, age, education level accounted for 10.0% of the variance in health promoting behavior. In conclusion, the results of this study on industrial workers supported Pender's health promotion model in partial and showed the relatedness between self concept and the practice of health promoting behavior. Further research is required to find factors influencing health promoting behaviors of industrial workers.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.spc1
• /
• pp.185-192
• /
• 2006

This experiment was conducted to assess genetic diversity of waxy corn inbred lines and to identify SSR markers related to major characteristics affected kernel quality for improving waxy corn $F_1$ hybrid with good quality. Diversity of 64 waxy com inbred lines was evaluated using 30 microsatellite markers. The 30 microsatellite markers representing 30 loci in the maize genome detected polymorphisms among the 64 inbred lines and revealed 225 alleles with a mean of 7.5 alleles per primer. The polymorphism Information content (PIC) value ranged from 0.14 to 0.87, with an average of 0.69. Based on Nei's genetic distances, the 64 inbred lines were classified into 9 groups by the cluster analysis. The group I included 26 inbred lines (41%), other groups included 3 to 9 inbred lines. One-way analysis of variance was conducted to identify significant relationship between individual markers and major characteristics that affect kernel quality. The analysis showed that umc1019 was related to amylopectin and crude protein content, me 1020 to amylopectin content and peak viscosity, and bnlg1537 to 100-kernel weight, kernel length, and kernel width.

• Journal of Biosystems Engineering
• /
• v.2 no.1
• /
• pp.7-24
• /
• 1977

This paper is the forth and fifth one of the study on balanced type oscillating mole drainer. In the light of the results from previous reports about the model tests, some design criteria were established and a prototype machine was set up for experimental purpose. Motion characteristics and functionof the each parts of the machine were checked and analyzed. After that, performance tests of the prototype machine were carried out in thefield. Obtained results are summarized as follows ; 1. Ten centimeter of the bullet diameter was determined so as to be able to attach it to the tractors with capacity of 30 PS to 40 PS. 2. To maintain the balance between the moments of the front shank and rear shank, the oscillating amplitude of the rear bullet was determined to be larger than that of the front bullet. At the same time , the oscillating direction of the rear bullet was designed with the inclines of ten to thirty degrees. 3. An octagonal dynamo transduced was developed for measuring the compressive force of the upper link is measuring the draft force of the machine. Acceptable linear relationship between forces and strain responses from O.D.T. was obtained. 4. Analysing the balancing mechanism of the acting part of the machine , it was found that the total draft force of the machine was equal to the difference between the sum of the draft force produced from the right and left side bending moments of the lower drawber and the compressive force on the upper link. 5. There are acceptable linear relationship between the strain and twisting moment by driving shaft, and between strain and shank moment. Above results enable us to carry out the field experiment with prototype machine. 6. When the test machine was used in the field, it was possible to reduce the oscillating acceleration by forty percent in average as compared it with the single bullet mole drainer. 7. When the test machine was used under the oscillating condition, the dratt torce was reduced by 27 percent to 59 percent as compared it with the test machine under non-oscillating condition, while the draft force was increased by 7 percent to 20 percent as compared it with the mole drainer having oscillating single bullet. The reasoning behind this fact was considered as the resistance force due to the rear shank and bullet. 8. As the amplitude and frequency of the bullet were increased, the torque was increased accordingly. This tendency could be varied with the various characteristics of the given soils. And the larger frequency and amplitute, the more increasing oscil\ulcornerlating power but decreasing draft brce were needed, and draft force was increased as the velocity was increased.9. When the amplitude of the rear bullet was designed to be larger than that of the front bullet, the minimum value of the moment was lowered and oscillating acceleration was reduced. And when the oscillating direction of the rear bullet was declined back\ulcornerwards, oscillating acceleration was increased along with the increasing angle of decli\ulcornernation. When the test machine was operated in high speed, the difference between maximum moments and minimum ones became narrow. This varying magnitude of moments appeared on the moment oscillogram seems to be correlated to the oscillating acceleration and draft force. 10. From the analysis of variance, it was found that those factors such as frequency, amplitude, and operating velocity significantly affected in the oscillating acceleration, the draft resistance, the torque, the moment, and the total power required. And interaction between frequency and amplitude affected in the oscillating acceleration. 11. Within the given situation of this study, the most preferable operating conditions of the test machine were 7 Hz in oscillating frequency, 0.54 m/sec in operating velocity, and 39.1 mm in oscillating amplitude of front and rear bullets. However, it is necessary to select the proper frequency and magnitude of oscillation depending on the soil properties of the field in which the mole drainer is practiced by use of a bal1nced type oscillating mole drainer. 12. It is recommended that a comparative study of the mole drainers would be performed in the near future using two separate balanced oscillating bullet with the one which is operated by oscillating the movable bullet in a single cylinder or other balanced type which may be single oscillating bullet with spring, damper or balancing weight, and that of thing. To expand the applicability of the balanced type oscillating mole drainer in practical use, it is suggested to develop a new mechanism which perform mole drain with vinyl pipe or filling material such as rice hull.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.1
• /
• pp.23-30
• /
• 1995

This study was undertaken to clarify the effects of electrical stimulation on physicochemical and rheological properties of the plaice (Paralichthys olivaceus) muscle at early period after death. The plaices were electrically stimulated in seawater bath (110V/60Hz) for 15sec., 35sec., and 60sec. and killed instantly with spiking at the head. Killed samples were stored at $5^{\circ}C$, and the changes in rigor index, ATP breakdown, lactate accumulation, and breaking strength of muscle through storage were investigated. Electrical stimulation effectively accelerated rigor-mortis, lactate accumulation , and ATP breakdown. As the time of electrical stimulation was lengthened, the onset of rigor-mortis of all samples were accelerated Just after killing, and the amount of lactate was rapidly increased, But, significant differences were not observed in variance of rigor-mortis and lactate concentration. Electrically stimulated plaices showed decreasing in ATP to $4.58{\mu}mole/g$ for 15sec., $4.13{\mu}mole/g$ for 35sec., and $2.39{\mu}mole/g$ for 60sec. samples as compared with $5.5{\mu}mole/g$ of unstimulated samples. As the time of electrical stimulation was lengthened, ATP in samples were decomposed more rapidly. The rate constant of ATP breakdown were $0.244hr^{-1}$ for 15sec., $0.358hr^{-1}$ for 35sec., and $0.479hr^{-1}$ for 60sec.. The level of breaking strength in muscle of the plaice was $1050.30\pm50.23g$ immediately after killing. Values of breaking strength in samples electrically stimulated for 35sec. increased rapidly just after killing among all samples. However, the breaking strength was not increased through the whole storage time in samples stimulated for 60sec.. The value and time roaching to the maximum breaking strength for each samples stimulated electrically for 15, 35 and 60 second were $1264.43\pm35.76g$ and 2hr, $1357.68\pm22.50g$ and Ohr, and $1012.18\pm57.36g$ and Ohr. Breaking strength in all samples electrically stimulated decreased significantly (P<0.05) after reaching the maximum values.

• Parasites, Hosts and Diseases
• /
• v.23 no.1
• /
• pp.87-94
• /
• 1985

The seasonal variations of the rate and intensity of metacercarial infection of C. sinensis in P. parva were observed. The fish were collected at Sun-Am River which located in Kim-Hae City, Kyong-Sang Nam Do (=Province), Korea, from March 1983, to February 1984 every month. A total of 788 fish was examined. The number of metacercariae in each fish was individually counted after the individual digestion by artificial gastric juice. The results were as follows: 1. During one year, 513 (65.1%) out of 788 fish were infected with metacercariae. In May, June, July and September, the infection rates ranged from 82.0% to 98.6% whereas the rates was relatively low in March, April, November and February ranging from 11.4% to 64.7%. 2. The intensity of infection was similar with those of infection rates. The mean intensity per infected fish was 103.0 and standard deviation was 118.9 throughout one year. The highest mean intensity was in June (294.8) and the lowest in November (11.1). 3. The observed frequency of fish with certain intensities of metacercariae were fitted to theoretical equations derived from negative binomial distribution in March, April, November and February (p>0.05). Meanwhile, the equation of lognormal distribution were fitted with the observed frequencies in May, June, July and September (p>0.05, p>O. 75). The variance/mean ratio varied by month. The value was the highest in July (814.3) and the lowest in November (158.8). Unlike our hypothesis, the metacercarial density of Clonorchis sinensis in its the most favorable fish host, Pseudorasbora parva showed considerable seasonal variations in the hyperendemic area. The possible factors were discussed.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.13 no.1
• /
• pp.2177-2190
• /
• 1971

This experiment was made to determienthe effect of various soil moisture contents in simulated drought conditions on different stages of rice growth. The drought conditions were developed at such three rice-growing stages as transplanting, immediately after transplanting and young ear forming. Three different lengths of drought periods, which are ten days, twenty days and thirty days, were applied for each growing stage of rice. The rice variety used this experiment is Nong-rim 29. This experiment was conducted at the university farm of the Kon-Kuk University during the period of $1968{\sim}1970$. Three reprications for each of 12 treatments and split plot design were employed in this study. Bottomless wood square boxes, $1^m{\times}1^m{\times}1^m$, were burried in the test plot and box top was covered with poloyethylene sheets to avoid natural rainfall drops. Standard plots were irrigated continuously with a water depth of 40mm/day and those of drought treatments were irrigated continuously up to the beginning of the planned drought period, and they were irrigated again with a depth of 40mm/day up to the maturing stage of rice. Other methods for rice raising followed those methods developed by the Field Crops Experiment Station of the Office of Rural Development. During this experiments, climatic conditions in regard to rainfalls, sunshine hours, and temperatures were observed. According to this observation, those values measured deviate slightly from the annual means. However the growing condition of rice plants were normal. The pH value of irritation water is nearly neutral, and soils in the test plots are relatively fertile, being similar to ordinary paddy soils. Analysis of variances for number of stalks, plan-height, ear sprouting date, length of stalks, ear length, number of ears per plant, fertility, grain weitght, weight of plant, and yield were carried out. The variances for plant height, ear sprouting date, length of stalk ear length, and yield has statistical significance under drought treatments applied at three different growing stages. The variance showing the effect of lengths of drought period is highly significant for all the treatments studied except that of grain weight. The interaction between drought periods and drought treatments at different growing stages is significant for plant height, stalk length, ear length, number of ears, fertility and yield, these results indicated that droughts at different growing stages have influence on plant height, ear length, yield, and length of drought period also has strong influence on all factors studied except grain weight. The combination of drought treatments at different rice growing stages and lengths of drought periods has different effects on various agronomic characteristics, including yield. Plant height under drought treatment practiced at transplanting stage is the lowest, and drought treatment applied immediately after transplanting resulted in the least number of stalks. The effect of different lengths of drought periods on plant height and number of stalks depends signis ficantly on increasing days of drought. Ear sprouting date tends to be delayed for one or two days undedrought treatments at transplanting period and with increasing days of drought. Better yield is secured in drought treatment applied immediately after transplanting. Adverse effect war observed when drought treatment was applied at ear forming period. These effects may be attributed to the alternation of irrigation and drought causing vigorous root activity. In general, yield linearly decreases as the length of the drought period increases. The results obtained in this study demonstrate that, in order to mimimize damage due to drought, and, to save irrigation water, paddy fields, immediately after transplanting, may be not irrigated, since there is sufficient moisture in the soil, and that sufficient irrigation water should be applied again in the ear forming stage of rice plant.