• Safety and Health at Work
• /
• v.12 no.3
• /
• pp.324-338
• /
• 2021

Background: We hypothesized that the growing demand of Korean workers for work-life balance would change the factors influencing job satisfaction. We sought to verify our hypothesis by conducting a conjoint analysis based on the Korean Working Conditions Survey (KWCS). Methods: We analyzed the raw data of the KWCS, conducted by the Occupational Safety and Health Research Institute from 2006 to 2017. To complete the analysis, we counted on a conjoint model of analysis, typically used in the analysis of customer satisfaction. The dependent variable was the satisfaction of workers with their working conditions, and the independent variables were the job quality indicators identified by Eurofound. Results: The factors that have the greatest impact on working conditions satisfaction are summarized as follows: "physical environment" for the first wave, "adverse social behavior" for the second wave, "occupational status" for the third and fourth waves, and "management quality" for the fifth wave. "Earnings" were not a major factor in determining employee job satisfaction, and the relative importance index is decreasing. Conclusion: According to the results of the analysis of the tendencies of Korean workers, the factors that affect the satisfaction with the working conditions have changed over time. It is crucial to identify factors that affect working conditions to assure the health and productivity of workers. The results of this study demonstrate that policymakers and employers are required to attentively consider human relations and social environment at work to improve working conditions in the future.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.2
• /
• pp.213-225
• /
• 2020

Objectives: In order to prepare measures to enhance construction workers' satisfaction with their working environment, the effects of working conditions and the mediating effects of safety and health information on workers' satisfaction with their working environment in the construction industry have been studied. The results of this study can be used as basic data for further studies in this field. Method: Data on 1,361 male construction workers from the 5th Korea Working Condition Survey (KWCS) were used for this study. The effects of working conditions were analyzed using SPSS 25.0 and the mediating effects of health and safety information were analyzed with SPSS PROCESS macro using the bootstrap method. Results: The safety and health management system and the self-determination of break time had a statistically significant positive effect on satisfaction with the working environment. Chemical and ergonomic risk factors had a statistically significant negative effect on satisfaction with the working environment. The provision of safety and health information, the mediating variable, had a statistically significant positive effect on satisfaction with the working environment. Therefore, it had a mediating effect between working conditions and satisfaction with the working environment. Conclusion: In order to enhance construction workers' satisfaction with their working environment, the above results suggest that the safety and health management system should be well established; self-determination of break times should be guaranteed; and chemical and ergonomic risk factors should be controlled. In addition, workers should be provided with necessary health and safety information related to their work. This study will be useful if these findings are used as basic data in further studies in related fields.

• Journal of Families and Better Life
• /
• v.27 no.4
• /
• pp.117-126
• /
• 2009

The purpose of this study was to analyze the difference of working mothers' work-child rearing strain and their demand on special care services according to each mother's work conditions and childcare situation. 477 working mothers who have only one child each were gathered by the use of the purposive quota sampling method and analyzed with t-test, F-test, correlation, and multiple regression. The main results showed that working mothers had high work-child rearing strain and demand on special care services when their working conditions were inflexible and they were not satisfied with the care services for their child. The major variable which explained working mothers' demand on special care services was e their work-child rearing strain.

• Korean Journal of Occupational Health Nursing
• /
• v.23 no.2
• /
• pp.89-96
• /
• 2014

Purpose: The purpose of this study is to discover the influence of the working conditions on women workers' occupational stress. Methods: Descriptive method is used to identify women's stress depending on their general working features and conditions by conducting a survey of them in women-dominated service industries. SPSS 18.0 program is used for data analysis and descriptive statistics is presented with standard deviation, frequency and percentage. ${\chi}^2$-test is used as an analysis tool. To figure out factors that influence their stress, logistic regression analysis is used for general features and working conditions as independent variables, and occupational stress as a dependent variable. Results: As a result, among the independent variables, employment status, weekly working hours, career, shiftwork, and work-family-balance are meaningful factors that influence their stress. Temporary workers' stress is 3.65 times higher (p<.001), and workers working over 48 hours a week have 1.97 times higher stress (p<.003). Workers with over 5 years' career are under 1.73 times higher stress (p<.046) and shift workers are under 3.51 times higher stress (p<.001). Work family balance results in 1.93 times higher stress (p<.009). Conclusion: It is necessary to seek how to prevent and manage women workers' stress considering features.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.59
• /
• pp.119-127
• /
• 2000

This paper describes the database for wire cutting electrodischarge conditions and variable taper wire-cut Machining. Electodischarge wire-cut machining is applicable to all materials that are fairly good electrical conductors, including metals, alloys, and most carbides. Thus it provides a relatively simple method for making holes of any desired cross section in materials that are too hard or brittle to be machined by most other methods. In conventional wire cutting CAM systems usually generate the NC code omitting electrodischarge conditions, so operator edits the NC code manually. But it is very inefficient. Therefore in this paper we propose a wire cutting CAM system including database for electrodischarge conditions. Proposed system consists of three steps: 1) Development of database for electrodischarge conditions 2) Development of CAM functions, Including 2D CAD modeling tools, file I/O functions, wire path genera tion functions and postprocessor. 3) Development of variable taper wire-cut machining module. The proposed system has been tested in the JinYoung precision Machine Co.,LTD. and found to be working satisfactorily.

• International Journal of Fluid Machinery and Systems
• /
• v.8 no.1
• /
• pp.13-22
• /
• 2015

This study presents a simulation model of a heat pump air conditioning system with a variable capacity compressor and variable speeds fans for electric bus. An experimental sample has been developed in order to check results from the model. Effects on system performance of such working conditions as compressor speed, evaporator fans speeds and the condenser fans speeds have been simulated by means of developed model. The results show that the three speeds can be adjusted simultaneously according to actual working condition so that the AC system can operate under the optimum state which the control objects want to achieve. It would be a good and simple solution to extend the driving ranges of EVs because of the highest efficiency and the lowest energy consumption of AC system.

• Journal of Korean Institute of Industrial Engineers
• /
• v.2 no.1
• /
• pp.61-78
• /
• 1976

The purpose of this study is to establish the horizontal and vertical working area which is dependent on measuring value of workers, body in order to make easy and stable working environments, and then to design the size of machines, tools and instruments in production factory because of making the practical production conditions which is the most suitable to human characteristics. But there is necessity that we have to review numeric value of measurement periodically because the size of workers' body is variable according to periodic and social circumstances. The establishment of standard working area after measurement enable us to make the best working conditions and we can design standard working table, optimum size of all machines and tools in production activity. Therefore, we can also acknowledge the importance of studying on human engineering because human engineering is necessary to reduction of fatigue in working, saving workers from industrial accidents, fail-safe system, improvement of productivity with increase in efficiency and etc. Finally, this study informs us that numeric value of measurement is larger than that of Japan, but not than that of America and Germany. So we can establish standard working area which is the most suitable for Korean inherence after measurement of detailed parts for workers' body.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.1
• /
• pp.45-65
• /
• 2016

Global competition and unstable economic situation in recent years have brought in adverse working conditions such as proliferation of temporary or part-time workers and new shift system. In this study we use exploratory data analysis method to find the relationship between some of the important variables which are related to working hours in KWCS (Korean Working Conditions Survey) and EWCS (European Working Conditions Survey). Next, working hours are explored in terms of sex, employment type, occupation and industry using 2006, 2010, 2011, 2014 KWCS data as well as 2010 EWCS data. Lastly, respondents are divided into two groups of healthy and nonhealthy workers and their working hours are explored in terms of the same categories as above. Finally, simple regression analysis is used to find the effect of health on weekly working hours and adjustment of the effect of health on weekly working hours is made using multiple regression analysis with some other independent variable such as sex, age and employment type included in the model.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.4
• /
• pp.1193-1215
• /
• 2021

The measurement of the key product quality index plays an important role in improving the production efficiency and ensuring the safety of the enterprise. Since the actual working conditions and parameters will inevitably change to some extent with time, such as drift of working point, wear of equipment and temperature change, etc., these will lead to the degradation of the quality variable prediction model. To deal with this problem, the selective integrated moving windows based principal component regression (SIMV-PCR) is proposed in this study. In the algorithm of traditional moving window, only the latest local process information is used, and the global process information will not be enough. In order to make full use of the process information contained in the past windows, a set of local models with differences are selected through hypothesis testing theory. The significance levels of both T - test and χ² - test are used to judge whether there is identity between two local models. Then the models are integrated by Bayesian quality estimation to improve the accuracy of quality variable prediction. The effectiveness of the proposed adaptive soft measurement method is verified by a numerical example and a practical industrial process.

• Design & Manufacturing
• /
• v.6 no.2
• /
• pp.84-89
• /
• 2012

In recent years, technology of press plastic working having made remarkable progress. We can say this because it facilitates mass production and have superior performances in machining speed and equivalency of quality than other processing methods. In characteristics of press plastic working, mold manufacturing according to characteristics of each product should be preceded before processing and it has a great influence on machining speed and quality of products and etc according to manufacturing method. Therefore, mold design technology is a critical technology in press plastic working. There are lots of variables in press plastic working according to worked material, mold materials, conditions of heat treatment, clearance and so on. Abrasion of mold depends on these kind of conditions and sheared surface which is crucial for quality of product also depends on them. In this study, we conduct research on abrasion loss of mold according to 8, 10 and 12% of clearance for thickness of 1.0mm of worked material out of mold design variables of the products whose worked materials are high carbon steel and carbon tool steel by a practical experiment.