• Journal of Internet Computing and Services
• /
• v.21 no.4
• /
• pp.35-41
• /
• 2020

This paper proposes an algorithm to improve the compression performance of the adaptive multi-rate (AMR) speech coding using the context tree weighting (CTW) method. AMR is the voice encoding standard adopted by IMT-2000, and supports 8 transmission rates from 4.75 kbit/s to 12.2 kbit/s to cope with changes in the channel condition. CTW as a kind of the arithmetic coding, uses a variable-order Markov model. Considering that CTW operates bit by bit, we propose an algorithm that re-orders AMR data and compresses them with CTW. To verify the validity of the proposed algorithm, an experiment is conducted to compare the proposed algorithm with existing compression methods including ZIP in terms of compression ratio. Experimental results indicate that the average additional compression rate in AMR data is about 3.21% with ZIP and about 9.10% with the proposed algorithm. Thus our algorithm improves the compression performance of AMR data by about 5.89%.

• Structural Engineering and Mechanics
• /
• v.77 no.2
• /
• pp.179-196
• /
• 2021

Experimental investigations on the seismic behaviors of the PVC-FRP Confined Reinforced Concrete (PFCRC) columns under low cyclic loading are carried out and two variable parameters including CFRP strips spacing and axial compression ratio are considered. The PFCRC column finally fails by bending and is characterized by the crushing of concrete and yielding of the longitudinal reinforcement, and the column with a high axial compression ratio is also accompanied by the cracking of the PVC tube and the fracture of CFRP strips. The hysteretic curves and skeleton curves of the columns are obtained from the experimental data. With the increase of axial compression ratio, the stiffness degradation rate accelerates and the ductility decreases. With the decrease of CFRP strips spacing, the unloading sections of the skeleton curves become steep and the ductility reduces significantly. On the basis of fiber model method, a numerical analysis approach for predicting the skeleton curves of the PFCRC columns is developed. Additionally, a simplified skeleton curve including the elastic stage, strengthening stage and unloading stage is suggested depending on the geometric drawing method. Moreover, the loading and unloading rules of the PFCRC columns are revealed by analyzing the features of the skeleton curves. The quantitative expressions that are used to predict the unloading stiffness of the specimens in each stage are proposed. Eventually, an analytical model for the PFCRC columns under low cyclic loading is established and it agrees well with test data.

• Structural Engineering and Mechanics
• /
• v.73 no.6
• /
• pp.613-620
• /
• 2020

The research study is focuses on a form of all-bolted joint with the external ring stiffening plate in the prefabricated steel structure. The components are bolted at site after being fabricated in the factory. Six specimens were tested under cyclic loading, and the effects of column axial compression ratio, concrete-filled column, beam flange sub plate, beam web angle cleats, and spliced column on the failure mode, hysteretic behavior and ductility of the joints were analyzed. The results shown that the proposed all-bolted joint with external ring stiffening plate performed high bearing capability, stable inflexibility degradation, high ductility and plump hysteretic curve. The primary failure modes were bucking at beam end, cracking at the variable section of the external ring stiffening plate, and finally welds fracturing between external ring stiffening plate and column wall. The bearing capability of the joints reduced with the axial compression ratio increased. The use of concrete-filled steel tube column can increase the bearing capability of joints. The existence of the beam flange sub plate, and beam web angle cleat improves the energy dissipation, ductility, bearing capacity and original rigidity of the joint, but also increase the stress concentration at the variable section of the external reinforcing ring plate. The proposed joints with spliced column also performed desirable integrity, large bearing capacity, initial stiffness and energy dissipation capacity for engineering application by reasonable design.

• Transactions on Electrical and Electronic Materials
• /
• v.9 no.6
• /
• pp.237-242
• /
• 2008

The effects of the process parameters in the molding of aspheric glass lenses for camera phone modules have been investigated experimentally. The molding conditions were optimized with respect to the form accuracy (PV) (the response variable) of the molded lens. The experimental conditions were obtained by employing a factorial design method. From the analysis of variance (ANOVA) and P-value (significance level), the slow cooling rate was found to affect the response variable most significantly. The lens molded under the optimum molding condition showed a transcription ratio of 93.4%.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.11
• /
• pp.3150-3156
• /
• 1999

In this paper, VTQM(Variable Threshold Quantization Method) is proposed, which enhances PSNR by composing the advantages of round-off and truncation quantization methods. From vast experiments, PSNR's of JPEG images with the method are compared with that of standard JPEG methods. At the boundary which affects the compression ratio, VTQM quantizes with a new threshold to reduce the length of compressed data; otherwise, VTQM employs the round-off quantization method to preserve the original image information. As a result, VTQM reduces bit rate while preserving the image quanity. The experimental results show that VTQM enhances PSNR by 0.2-0.3dB., 0.4-0.5dB, with the same bit rate than those of the traditional truncation and round-off quantization methods, respectively.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.4
• /
• pp.62-76
• /
• 1994

In this paper, a segmentation-based coding technique as applied to video sequences is proposed. A proposed method separates an image into contour and texture parts, then the visually-sensitive contour part is represented by chain codes and the visually-insensitive texture part is reconstructed by a representative motion vector of a region and mean of the segmented frame difference. It uses a change detector to find moving areas and adopts variable blocks to represent different motions correctly. For better quality of reconstructed images, the displaced frame difference between the original image and the motion compensated image reconstructed by the representative motion vector is segmented. Computer simulation with several video sequences shows that the proposed method gives better performance than the conventional ones in terms of the peak signal to noise ratio(PSNR) and compression ration.

• International journal of advanced smart convergence
• /
• v.5 no.2
• /
• pp.1-7
• /
• 2016

Recently, with the development of advanced thin film devices comes the need for constant high quality vacuum as the deposition pressure is more demanding. It is for this reason our research seeks to understand how the variable design factors are employed in such vacuum systems. In this study, the effects of design factor applications on the vacuum characteristics were simulated to obtain the optimum design modeling of variable models on an ultra high vacuum system. The commercial vacuum system simulator, $VacSim^{(multi)}$, was used in our investigation. The reliability of the employed simulator was verified by the simulation of the commercially available models of ultra high vacuum system. Simulated vacuum characteristics of the proposed modeling aligned with the observed experimental behavior of real systems. Simulated behaviors showed the optimum design models for the ideal conditions to achieve optimal pressure, pumping speed, and compression ratio in these systems.

• Journal of ILASS-Korea
• /
• v.22 no.1
• /
• pp.22-28
• /
• 2017

In this study, the effects of intake valve closing timing by using Cam-in-Cam system on combustion and emission characteristics for diesel engine were investigated under GT-POWER simulation environment. As a result, it was found that volumetric efficiency and effective compression ratio were decreased as the intake valve closing(IVC) timing is retarded due to its backflow effect. Also, we found that in-cylinder pressure, heat release rate and NOx emission were decreased as IVC timing was retarded. These show that the LIVC(late intake valve closing) can be effective to control AFR and mixing rate in diffusion combustion of diesel engine.

• Journal of Korean Society of Forest Science
• /
• v.104 no.2
• /
• pp.198-205
• /
• 2015

The aim of this study was to provide the basic design parameters for developing logging residue compression machines by investigating compressive deformation characteristics of different types of logging residues. To achieve these objectives, Pinus rigida, Pinus koraensis and Quercus mongolica were selected as specimens, and compression-deformation tests by UTM(universial testing machine) were conducted. The experimental dataset were used to set up the model based on the compression-deformation ratio in the form of exponential function. The results showed that stress coefficient in terms of mechanical properties of logging residues was decreased, whereas strain coefficient tended to be increased as the number of compression increased at target density of $350kg/m^3$ and $400kg/m^3$. The model presented that the required stress was decreased as the number of compression increased, and the stress growth rate was swelled compared to the change of the deformation rate. Therefore, it showed that proper initial compression force was a significant variable in order to achieve the target density of logging residue.

• Journal of the Korean Society of Radiology
• /
• v.12 no.4
• /
• pp.505-510
• /
• 2018

In this study, we allocate bits by quantizing these fractal coefficients through a quantizer which can extract the probability distribution. In the coding process of IFS, a variable size block method is used to shorten the coding time and improve the compression ratio. In the future, it will be necessary to further improve the coding time and the compression rate while maintaining the best image quality in the fractal coding process.