• 제목/요약/키워드: Variable Rate Technology

검색결과 483건 처리시간 0.032초

FPGA/VHDL을 이용한 LILI-128 암호의 고속화 구현에 관한 연구 (On a High-Speed Implementation of LILI-128 Stream Cipher Using FPGA/VHDL)

  • 이훈재;문상재
    • 정보보호학회논문지
    • /
    • 제11권3호
    • /
    • pp.23-32
    • /
    • 2001
  • LILI-128 스트림 암호는 클럭 조절형 스트림 암호방식이며, 이러한 구조는 동기식 논리회로 구현시 속도가 저하되 는 단점이 있다. 즉, 클럭 조절형인 LFSRd는 외부 클럭보다 1~4 배 높은 클럭을 요구하기 때문에 동일한 시스템 클 럭 하에서는 데이터 전송속도에 따른 시스템 성능이 저하된다. 본 논문에서는 귀환/이동에 있어서 랜덤한 4개의 연결 경로를 갖는 4-비트 병렬 LFSRd를 제안하였다. 그리고 ALTERA 사의 FPGA 소자(EPF10K20RC240-3)를 선정하여 그래 픽/VHDL 하드웨어 구현 및 타이밍 시뮬레이션을 실시하였으며, 50MHz 시스템 클럭에서 안정적인 50Mbps (즉, 45 Mbps 수준인 T3급 이상, 설계회로의 최대 지연 시간이 20ns 이하인 조건) 출력 수열이 발생될 수 있음을 확인하였다. 마지막으로, FPGA/VHDL 설계회로를 Lucent ASIC 소자 (LV160C, 0.13$\mu\textrm{m}$ CMOS & 1.5v technology)로 설계 변환 및 타이밍 시뮬레이션한 결과 최대 지연시간이 1.8ns 이하였고, 500 Mbps 이상의 고속화가 가능함을 확인하였다.

사회복지사의 직무스트레스가 이직의도와 업무소진에 미치는 영향 연구 (A Study on the Effect of Social Worker's Job Stress on Turnover Intention and Work Exhaustion)

  • 박은주;강민정
    • 문화기술의 융합
    • /
    • 제9권1호
    • /
    • pp.205-211
    • /
    • 2023
  • 본 연구의 목적은 사회복지사의 이직의도에 실제적으로 영향을 미치는 요인이 무엇인지 확인하는 데에 있다. 우리나라 사회복지시설 사회복지사들의 높은 이직률은 그들이 속한 조직에 부정적 영향을 미쳐 궁극적으로 사회복지 서비스의 안정적 전달을 저해하기 때문에 실증적 분석을 통해 사회복지사의 이직 요인을 파악하는 것은 중요한 과제다. 이직의도가 실제 이직으로 이어지지 않는다 하더라도 그들의 업무소진과 이직을 희망하는 상태에서의 서비스는 장기적으로 질적 수준이 떨어질 수 있기 때문에 근무 중인 사회복지사의 업무소진을 낮추는 문제 역시 중요하다. 그간 사회복지사의 이직 또는 이직의도에 대한 연구는 많았으나, 주로 특정 분야 또는 특정 지역으로 연구 대상을 한정해 그 결과를 일반화하기에는 어려움이 있었다. 본 연구는 사회서비스기업에 재직중인 사회복지사 100명을 분석한 결과를 사용했다. 실제 본 연구에서 사용한 자료에는 필용한 변수에 무응답한 18명을 제외하고 82명만을 대상으로 통계 분석을 실시했다. 이로써 직무스트레스가 이직의도와 업무소진에 미치는 일반적 영향에 대해 살펴볼 수 있었다. 우리는 독립변수인 직무스트레스가 사회복지사의 이직의도와 소진에 미치는 영향을 확인하고자 하였다. 구체적으로, 직무스트레스를 역할관련, 조직관련, 관계관련으로 나누어 통계분석한 결과 역할 관련 요인 직무스트레스만이 사회복지사의 이직의도를 유의미하게 설명하는 것으로 나타났다.

콘크리트 포장에서 발생하는 온도피해 저감에 관한 연구 (A Study on the Reduction of Temperature Damage in Concrete Pavement)

  • 김재돈;장일영
    • 한국재난정보학회 논문집
    • /
    • 제19권2호
    • /
    • pp.305-312
    • /
    • 2023
  • 연구목적: 본 연구에서는 콘크리트 포장의 온도피해를 줄이기 위해 상변화에너지가 큰 PCM을 콘크리트에 혼입하고 이에 따른 성능테스트를 진행하였다. 연구방법:저온 및 고온에 대한 온도피해를 감소시키기 위해 4.5℃와 44℃의 상변화 온도를 가지는 캡슐형 PCM을 10%, 30%, 50% 치환하여 콘크리트에 혼입하였으며 열전대와 변온챔버를 활용하여 열성능 실험과 압축강도 실험을 진행하였다. 연구결과: 열성능 실험 결과 PCM의 혼입은 최대 25%이상의 온도저항성을 향상시키는 것으로 나타났으며 다량 치환시 높은 비열로 모든 온도에서 열저항성을 높이는 것으로 나타났다. 압축강도 실험 결과 30%이상의 치환은 압축강도를 저하시키는 결과를 나타냈으며 PCM의 상변화온도를 기준으로 큰 강도차이를 나타냈다. 결론: PCM의 혼입은 콘크리트의 열성능을 증가시키는 것으로 나타냈으며 PCM의 상변화온도 부근에서 가장 큰 열성능 증가폭을 나타냈다. 또한 가장 높은 치환율인 50% 치환에서 10%~20%의 작은 강도저하가 발생하였으므로 사용성에 큰 문제가 없을 것으로 판단되며 열성능 향상을 위해 추가적인 PCM 투입이 가능할 것으로 판단된다.

병원 단위비용 결정요인에 관한 연구 (Analyses of the Efficiency in Hospital Management)

  • 노공균;이선
    • 한국병원경영학회지
    • /
    • 제9권1호
    • /
    • pp.66-94
    • /
    • 2004
  • The objective of this study is to examine how to maximize the efficiency of hospital management by minimizing the unit cost of hospital operation. For this purpose, this paper proposes to develop a model of the profit maximization based on the cost minimization dictum using the statistical tools of arriving at the maximum likelihood values. The preliminary survey data are collected from the annual statistics and their analyses published by Korea Health Industry Development Institute and Korean Hospital Association. The maximum likelihood value statistical analyses are conducted from the information on the cost (function) of each of 36 hospitals selected by the random stratified sampling method according to the size and location (urban or rural) of hospitals. We believe that, although the size of sample is relatively small, because of the sampling method used and the high response rate, the power of estimation of the results of the statistical analyses of the sample hospitals is acceptable. The conceptual framework of analyses is adopted from the various models of the determinants of hospital costs used by the previous studies. According to this framework, the study postulates that the unit cost of hospital operation is determined by the size, scope of service, technology (production function) as measured by capacity utilization, labor capital ratio and labor input-mix variables, and by exogeneous variables. The variables to represent the above cost determinants are selected by using the step-wise regression so that only the statistically significant variables may be utilized in analyzing how these variables impact on the hospital unit cost. The results of the analyses show that the models of hospital cost determinants adopted are well chosen. The various models analyzed have the (goodness of fit) overall determination (R2) which all turned out to be significant, regardless of the variables put in to represent the cost determinants. Specifically, the size and scope of service, no matter how it is measured, i. e., number of admissions per bed, number of ambulatory visits per bed, adjusted inpatient days and adjusted outpatients, have overall effects of reducing the hospital unit costs as measured by the cost per admission, per inpatient day, or office visit implying the existence of the economy of scale in the hospital operation. Thirdly, the technology used in operating a hospital has turned out to have its ramifications on the hospital unit cost similar to those postulated in the static theory of the firm. For example, the capacity utilization as represented by the inpatient days per employee tuned out to have statistically significant negative impacts on the unit cost of hospital operation, while payroll expenses per inpatient cost has a positive effect. The input-mix of hospital operation, as represented by the ratio of the number of doctor, nurse or medical staff per general employee, supports the known thesis that the specialized manpower costs more than the general employees. The labor/capital ratio as represented by the employees per 100 beds is shown to have a positive effect on the cost as expected. As for the exogeneous variable's impacts on the cost, when this variable is represented by the percent of urban 100 population at the location where the hospital is located, the regression analysis shows that the hospitals located in the urban area have a higher cost than those in the rural area. Finally, the case study of the sample hospitals offers a specific information to hospital administrators about how they share in terms of the cost they are incurring in comparison to other hospitals. For example, if his/her hospital is of small size and located in a city, he/she can compare the various costs of his/her hospital operation with those of other similar hospitals. Therefore, he/she may be able to find the reasons why the cost of his/her hospital operation has a higher or lower cost than other similar hospitals in what factors of the hospital cost determinants.

  • PDF

인터넷 커뮤니티에서 사용자 참여가 밀착도와 지속적 이용의도에 미치는 영향 (A Study on the Effects of User Participation on Stickiness and Continued Use on Internet Community)

  • 고미현;권순동
    • Asia pacific journal of information systems
    • /
    • 제18권2호
    • /
    • pp.41-72
    • /
    • 2008
  • The purpose of this study is the investigation of the effects of user participation, network effect, social influence, and usefulness on stickiness and continued use on Internet communities. In this research, stickiness refers to repeat visit and visit duration to an Internet community. Continued use means the willingness to continue to use an Internet community in the future. Internet community-based companies can earn money through selling the digital contents such as game, music, and avatar, advertizing on internet site, or offering an affiliate marketing. For such money making, stickiness and continued use of Internet users is much more important than the number of Internet users. We tried to answer following three questions. Fist, what is the effects of user participation on stickiness and continued use on Internet communities? Second, by what is user participation formed? Third, are network effect, social influence, and usefulness that was significant at prior research about technology acceptance model(TAM) still significant on internet communities? In this study, user participation, network effect, social influence, and usefulness are independent variables, stickiness is mediating variable, and continued use is dependent variable. Among independent variables, we are focused on user participation. User participation means that Internet user participates in the development of Internet community site (called mini-hompy or blog in Korea). User participation was studied from 1970 to 1997 at the research area of information system. But since 1997 when Internet started to spread to the public, user participation has hardly been studied. Given the importance of user participation at the success of Internet-based companies, it is very meaningful to study the research topic of user participation. To test the proposed model, we used a data set generated from the survey. The survey instrument was designed on the basis of a comprehensive literature review and interviews of experts, and was refined through several rounds of pretests, revisions, and pilot tests. The respondents of survey were the undergraduates and the graduate students who mainly used Internet communities. Data analysis was conducted using 217 respondents(response rate, 97.7 percent). We used structural equation modeling(SEM) implemented in partial least square(PLS). We chose PLS for two reason. First, our model has formative constructs. PLS uses components-based algorithm and can estimated formative constructs. Second, PLS is more appropriate when the research model is in an early stage of development. A review of the literature suggests that empirical tests of user participation is still sparse. The test of model was executed in the order of three research questions. First user participation had the direct effects on stickiness(${\beta}$=0.150, p<0.01) and continued use (${\beta}$=0.119, p<0.05). And user participation, as a partial mediation model, had a indirect effect on continued use mediated through stickiness (${\beta}$=0.007, p<0.05). Second, optional participation and prosuming participation significantly formed user participation. Optional participation, with a path magnitude as high as 0.986 (p<0.001), is a key determinant for the strength of user participation. Third, Network effect (${\beta}$=0.236, p<0.001). social influence (${\beta}$=0.135, p<0.05), and usefulness (${\beta}$=0.343, p<0.001) had directly significant impacts on stickiness. But network effect and social influence, as a full mediation model, had both indirectly significant impacts on continued use mediated through stickiness (${\beta}$=0.11, p<0.001, and ${\beta}$=0.063, p<0.05, respectively). Compared with this result, usefulness, as a partial mediation model, had a direct impact on continued use and a indirect impact on continued use mediated through stickiness. This study has three contributions. First this is the first empirical study showing that user participation is the significant driver of continued use. The researchers of information system have hardly studies user participation since late 1990s. And the researchers of marketing have studied a few lately. Second, this study enhanced the understanding of user participation. Up to recently, user participation has been studied from the bipolar viewpoint of participation v.s non-participation. Also, even the study on participation has been studied from the point of limited optional participation. But, this study proved the existence of prosuming participation to design and produce products or services, besides optional participation. And this study empirically proved that optional participation and prosuming participation were the key determinant for user participation. Third, our study compliments traditional studies of TAM. According prior literature about of TAM, the constructs of network effect, social influence, and usefulness had effects on the technology adoption. This study proved that these constructs still are significant on Internet communities.

Trinexapac-ethyl, Amidochlor 및 Mefluidide가 들잔디 직립생장에 미치는 효과 (Vertical Shoot Growth of Korean Lawngrass (Zoysia japonica Steud.) Influenced by Trinexapac-ethyl, Amidochlor, and Mefluidide)

  • 김경남;김용선
    • 원예과학기술지
    • /
    • 제17권5호
    • /
    • pp.572-577
    • /
    • 1999
  • 여러 가지 생장조절제가 들잔디 직립생장에 미치는 영향을 규명함으로써 예초관리에 적절한 생장조절제 종류 및 적용수준을 파악하고자 본 연구를 수행하였다. 실험은 페어웨이 수준으로 유지되고 있는 들잔디 연구포장에서 1995년 2회에 걸쳐 각각 다른 장소에서 실시하였다. 공시한 3종류 생장조절제 모두 들잔디 생장을 억제하였지만, 억제기간은 종류에 따라 다르게 나타났다. 처리 1주 후 대부분의 생장조절제 처리구에서 약 10%에서 20% 정도의 억제효과가 있었다. Amidochlor 처리구는 $0.30mL{\cdot}m^{-2}$에서 $0.60mL{\cdot}m^{-2}$ 사이까지 3, 4주 정도 효과가 지속되었고, $0.08mL{\cdot}m^{-2}$ 이상의 trinexapacethyl 처리구에서는 8주까지 약 35% 정도의 억제효과가 관찰되었다. 다른 생장조절제에 비해 생장억제가 3, 4일 정도 빨리 나타난 mefluidide 처리구도 8주 정도 억제효과가 있었지만, 엽색 퇴화도 동시에 관찰되었다. 직립생장억제 관점에서 관리 정도가 낮게 유지되는 한국잔디에서 장기간 효과는 trinexapac-ethyl 처리가 amidochlor 및 mefluidide 보다 더 효과적인 것으로 사료되었다. 계절에 따라 생장조절제의 효과차이가 다르게 나타났는데, 들잔디 생육왕성기인 7월 처리에 비해 6월 처리시 직립경 생장억제 정도가 높게 나타났다. 본 연구를 통해 잔디 관리시 생장조절제 종류에 따라 30%에서 60% 정도 예초 회수를 감소시킬 수 있는 것으로 나타났으나, 예초 관리와 관련하여 기대하는 생장억제 기간에 따라 생장조절제 종류 및 적용 수준을 선택하는 것이 필요하다.

  • PDF

지상파 UHD 콘텐츠 전송 스케줄러 설계 및 구현 (Design and Implementation of Transmission Scheduler for Terrestrial UHD Contents)

  • 백종호;서민재;유경아
    • 방송공학회논문지
    • /
    • 제24권1호
    • /
    • pp.118-131
    • /
    • 2019
  • 대용량의 8K UHD(Ultra High Definition) 콘텐츠를 지상파 방송으로 제공하기 위해서는 현 지상파 방송 시스템으로는 제한된 대역폭 등 여러 문제점이 있다. 이러한 문제점을 해결하기 위해 UHD 콘텐츠 전송 기술이 연구되었고, 그 중 하나로 지상파 방송망과 통신망을 이용한 8K UHD 방송 시스템이 제안되었다. 해당 기술은 8K UHD 콘텐츠를 영역 분할한 후 계층 분리를 통해 이종망으로 전송하여 지상파 방송망의 제한된 대역폭 문제를 해결하고자 하였다. 지상파 방송망을 통해 FHD(Full High Definition)에 해당하는 기본 계층과 4K UHD를 위한 부가 향상 계층 데이터를 전송하고, 통신망으로 8K UHD를 위한 부가 향상 계층 데이터를 전송한다. 이러한 방식으로 8K 콘텐츠를 제공할 경우, 지상파로는 최대 4K UHD 방송을 수신 할 수 있고 통신망을 추가로 이용할 경우 8K UHD까지 수신가능하다. 그러나 현재 국내 지상파 UHD 방송의 할당된 비트율 내에서 4K UHD 콘텐츠를 전송하기 위해서는 압축율을 높여 전송하는 상황도 존재하여 일정 수준의 화질열화는 필연적으로 발생한다. 그럼에도 UHD 콘텐츠의 특성상, 화질은어떤 요소보다 최우선적으로 고려되어야 하므로 제한된 비트율 내에서도 화질을 최대한 보장할 수 있어야 한다. 이를 위해서는 방송 시스템 내의 콘텐츠 생성기의 패킷 스케줄링이 필요하다. 콘텐츠 생성기는 방송망과 통신망을 이용한 8K UHD 방송 시스템내에서 인코딩된 미디어 데이터들을 패킷화하고 다중화기로 송출하는 기능을 수행한다. 다중화기는 콘텐츠 생성기로부터 전달받은 패킷 순서대로 송출하기 때문에 콘텐츠 생성기에서 다중화기로 전송하는 과정의 전송 시간과 전송률을 일정하고 정확하게 하는 것이 매우 중요하다. 따라서 본 논문에서는 일정 수준의 UHD 콘텐츠의 화질을 보장할 수 있도록 콘텐츠 생성기와 다중화기 간의 데이터 전송량 가변 전송 스케줄러를 제안한다. 이를 통해 UHD 방송 콘텐츠 종류에 관계없이 일정 수준의 화질을 보장하면서도 UHD 서비스의 끊김이나 지연을 최소화하여 사용자의 QoS(Quality of Service)를 향상시키고자 한다.

Therapeutic Strategy for the Prevention of Pseudorabies Virus Infection in C57BL/6 Mice by 3D8 scFv with Intrinsic Nuclease Activity

  • Lee, Gunsup;Cho, SeungChan;Hoang, Phuong Mai;Kim, Dongjun;Lee, Yongjun;Kil, Eui-Joon;Byun, Sung-June;Lee, Taek-Kyun;Kim, Dae-Hyun;Kim, Sunghan;Lee, Sukchan
    • Molecules and Cells
    • /
    • 제38권9호
    • /
    • pp.773-780
    • /
    • 2015
  • 3D8 single chain variable fragment (scFv) is a recombinant monoclonal antibody with nuclease activity that was originally isolated from autoimmune-prone MRL mice. In a previous study, we analyzed the nuclease activity of 3D8 scFv and determined that a HeLa cell line expressing 3D8 scFv conferred resistance to herpes simplex virus type 1 (HSV-1) and pseudorabies virus (PRV). In this study, we demonstrate that 3D8 scFv could be delivered to target tissues and cells where it exerted a therapeutic effect against PRV. PRV was inoculated via intramuscular injection, and 3D8 scFv was injected intraperitoneally. The observed therapeutic effect of 3D8 scFv against PRV was also supported by results from quantitative reverse transcription polymerase chain reaction, southern hybridization, and immunohistochemical assays. Intraperitoneal injection of 5 and $10{\mu}g$ 3D8 scFv resulted in no detectable toxicity. The survival rate in C57BL/6 mice was 9% after intramuscular injection of 10 $LD_{50}$ PRV. In contrast, the 3D8 scFv-injected C57BL/6 mice showed survival rates of 57% ($5{\mu}g$) and 47% ($10{\mu}g$). The results indicate that 3D8 scFv could be utilized as an effective antiviral agent in several animal models.

HVPE 법에서의 공정변수 조절에 의한 bulk GaN 단결정의 두께 최적화 (Thickness optimization of the bulk GaN single crystal grown by HVPE processing variable control)

  • 박재화;이희애;이주형;박철우;이정훈;강효상;강석현;방신영;이성국;심광보
    • 한국결정성장학회지
    • /
    • 제27권2호
    • /
    • pp.89-93
    • /
    • 2017
  • 다양한 성장온도, V/III 비율, 성장속도과 같은 공정변수의 조절을 통하여 GaN 단결정을 성장시키고, 그에 따른 표면 및 재료 내부의 결함분석을 통하여 고휘도 고출력의 소자적용을 위한 bulk GaN 단결정의 두께를 최적화하였다. 2인치 직경의 sapphire 기판 위에 HVPE(hydride vapor phase epitaxy) 공정변수들을 조절하여, 0.3~7.0 mm 두께의 GaN 결정을 성장시켰다. 성장된 GaN 단결정의 구조분석을 위하여 XRD 분석을 사용하였고, 공정변수의 변화에 따른 표면 특성은 광학 현미경을 이용하여 관찰하였다. 성장된 두께에 따른 결함밀도 분석을 위하여 화학습식 에칭하였고, 에칭된 표면을 SEM으로 관찰하였다.

Rotor Speed-based Droop of a Wind Generator in a Wind Power Plant for the Virtual Inertial Control

  • Lee, Jinsik;Kim, Jinho;Kim, Yeon-Hee;Chun, Yeong-Han;Lee, Sang Ho;Seok, Jul-Ki;Kang, Yong Cheol
    • Journal of Electrical Engineering and Technology
    • /
    • 제8권5호
    • /
    • pp.1021-1028
    • /
    • 2013
  • The frequency of a power system should be kept within limits to produce high-quality electricity. For a power system with a high penetration of wind generators (WGs), difficulties might arise in maintaining the frequency, because modern variable speed WGs operate based on the maximum power point tracking control scheme. On the other hand, the wind speed that arrives at a downstream WG is decreased after having passed one WG due to the wake effect. The rotor speed of each WG may be different from others. This paper proposes an algorithm for assigning the droop of each WG in a wind power plant (WPP) based on the rotor speed for the virtual inertial control considering the wake effect. It assumes that each WG in the WPP has two auxiliary loops for the virtual inertial control, i.e. the frequency deviation loop and the rate of change of frequency (ROCOF) loop. To release more kinetic energy, the proposed algorithm assigns the droop of each WG, which is the gain of the frequency deviation loop, depending on the rotor speed of each WG, while the gains for the ROCOF loop of all WGs are set to be equal. The performance of the algorithm is investigated for a model system with five synchronous generators and a WPP, which consists of 15 doubly-fed induction generators, by varying the wind direction as well as the wind speed. The results clearly indicate that the algorithm successfully reduces the frequency nadir as a WG with high wind speed releases more kinetic energy for the virtual inertial control. The algorithm might help maximize the contribution of the WPP to the frequency support.