• Journal of Advanced Marine Engineering and Technology
• /
• 제31권8호
• /
• pp.954-960
• /
• 2007

The purpose of this paper is to obtain design method of air-distribution system. Air-distribution system is composed of blower, duct, diffusers and measuring equipment. The air-flow rate from each diffuser is not equal. The air-flow rate is calculated with the combined equations which are Bernoulli's equation, continuity equation and minor loss equations. Inlet condition and outlet condition are adapted in each duct system. Then square difference between function of maximum air-flow rate and minimum air-flow rate is used as an object function. Area of diffuser and velocity are established as constraints. To minimize the object function, the optimization method is used. After optimization the design variables are selected under satisfaction of constraints. The air-distribution system is calculated again with the result of optimized design variable. It is shown that the air-distribution system has the equal air-flow rate from diffusers.

• 한국안전학회지
• /
• 제9권4호
• /
• pp.17-28
• /
• 1994

Chip breaking is important in lathe work for maintaining good surface of the products and safety of operator. The purpose of this study is to investigate the performance of chip breaking and chip shape resulted from the carbide inserts with grooved type and obstruction type chip breaker. Experiments have been performed under the following cutting conditions, (1) constant cutting speed with variable depth of cut and feed rate, (2) constant depth of cut with variable cutting speed and feed rate. Also, the flying distance of chip and it's distribution have been investigated. As a results, good performance of chip breaking can be obtained for small radius of curvature and land width of grooved type chip breaker. And the thickness of chip increase with the increase of feed rate and decrease of cutting speed, and the chip breaking becomes easier with the increase of chip thickness due to the large deformation rate. Obstraction type chip breaker shows better performance of surface roughness than the grooved type. The flying distance of the chips over 90% are less than 1 meter, and the distance decreases as the feed rate decreases.

• 대한산업공학회지
• /
• 제26권4호
• /
• pp.376-383
• /
• 2000

A flexible disk grinding process model has been implemented with varying disk orientation with respect to workpiece surface along with variable feed rate. Before implementing arbitrary disk orientation and translation, disk angle and feed rate variation have been implemented. The disk angle was changed with constant angular velocity only in the entrance stage. The effect of the variable feed rate was added to the geometric schematic. The feed rate was changed either from the entrance stage or from the between edges stage and process performance was evaluated. Effect of changing both angle end feed rate has been also analyzed. Disk trend showing actual disk deflection has also been visualized.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2002년도 춘계학술발표논문집 (하)
• /
• pp.1393-1396
• /
• 2002

무선 ATM(Asynchronous Transfer Mode) 망을 기본으로 하여 ATM망에서 사용하는 서비스 종류인 CBR(Constant Bit Rate), rtVBR(Real-Time Variable Bit Rate), nrtVBR(Non-Real-Time Variable Bit Rate), ABR(Available Bit Rate), UBR(Unspecified Bit Rate)에 따른 플로우를 우선 각 서비스 흐름에 따라서 공평하게 패킷 스케줄링 한다. 그리고 각 서비스 종류에 따라 대역이나 지연에 따라 모든 사용자의 다양한 서비스 트래픽에 공평하게 서비스하는 구조를 갖는다. 아울러 무선 통신망 채널에 에러가 발생할 경우를 고려하여 각 서비스 트래픽에 대한 QoS(Quality of Service)를 보장해주는 무선 ATM 통신망에서 동작하는 스케줄링 알고리즘을 제안하여 시뮬레이션과을 통해 기존의 방법과 성능을 비교하여 기존의 유선 통신망 스케줄링 알고리즘과 달리 무선망의 에러에 대한 각 트래픽의 에러에 대한 성능 향상에 대해 알아본다.

• 융합신호처리학회논문지
• /
• 제12권2호
• /
• pp.128-132
• /
• 2011

LMS(Least mean square) 적응 알고리즘은 radar, sonar, 음성처리, 이동통신 분야 등에서 중요한 역할을 하고 있다. 이동통신 분야에서는 LMS 적응 알고리즘의 빠른 수렴속도가 더욱 중요하다. 하지만 LMS 알고리즘은 수렴속도가 느리고 일정치 않은 수렴을 하는 문제점을 가지고 있다. 이러한 문제점을 해결하기 위하여 다양한 가변 스텝 LMS 적응 알고리즘들이 최근에 많이 연구되어왔다. 연구된 많은 LMS 알고리즘들은 빠른 수렴속도를 얻기 위하여 복잡한 가변스텝방식을 사용하는데 이는 많은 계산량을 필요로 한다. 따라서 LMS 알고리즘의 최대 장점인 단순성과 강인성을 약화시킨다. 제안하는 결정함수 가변스텝 LMS 알고리즘은 스텝 값을 간단한 결정함수에 따라 결정하므로 단순성을 최대한 강화하면서 빠른 수렴속도를 얻도록 한다.

• 전기학회논문지
• /
• 제62권4호
• /
• pp.562-565
• /
• 2013

A new variable rate speech coding technique is proposed. The method is based on the observation that the speech signal approximately looks linear for a very short period of time. The information transmitted is the location and data value of inflection points. If the distance between the inflection points is large, the mid point location and its data value are also delivered. Thus, the encoder transmits both the location and the data value for the inflection samples, but the location only for the non-inflection points. The location information is expressed using one bit for each sample, 0 for non-inflection and 1 for inflection point. At the receiver, using the interpolation, the decoder estimates the untransmitted sample values for non-inflection locations from the received sample values for the inflection samples. With 50 % of computational cost of the existing CVSD delta modulation, the proposed method is expected to achieve the data rate of 36 to 38 kbps and the SNR of 10 to 13 dB.

• 사상체질의학회지
• /
• 제19권1호
• /
• pp.78-89
• /
• 2007

1. Objectives This is the comparative study with hand-operated measurement method & Automatic measurement method, in order to convert the automatic measurement method. 2. Methods We measured the body of patients(hand-operated width 5 places and hand-operated circumference 8 places, Automatic width 5 places) and analyzed the anthropometric data dividing into sex, age, BMI. 1057 patients's data are used in the analysis. 3. Results and Conclusions 1) 5th Width variable which was measured during lying down was not a sasang constitutional difference. 2) Diagnostic accuracy rate of the body measurement by Width which was measured during lying down and Width which IBS standing was 40-60%. 3) Diagnostic accuracy rate of Automatic & hand-operated measuring was not a big difference.

• Journal of Biosystems Engineering
• /
• 제32권6호
• /
• pp.383-388
• /
• 2007

In precision farming, proper calibration and operation of a variable rate machine are critical to reduce input of agrochemicals and to ensure productivity and quality of agricultural products. As an effort to introduce precision farming to rice production in Korea, a pneumatic granular applicator was developed. This investigation intended to evaluate the application performance such as application accuracy, application uniformity and to suggest how to adjust the blow-heads to get uniform application pattern, and to suggest a practical way of adjustment of the blow-heads for uniform application. Tests to evaluate the application performance were conducted. The application uniformities (CV) in both transverse direction and longitudinal direction were less than 15% and application accuracy was greater than 81%. A simple method for adjusting the inserting length of blow-heads was suggested.

• 한국전자통신학회논문지
• /
• 제7권1호
• /
• pp.33-38
• /
• 2012

수중 음향 채널은 매우 복잡하고 지속적인 시변 특성을 가지므로 양질의 통신 서비스를 제공하기란 쉽지 않다. 이러한 수중 음향 채널의 열악한 환경에 대해서 신뢰성이 있고 강건한 통신 서비스를 제공하기 위해서 본 논문에서는 데이터 전송율을 가변시키는 다중 반송파 CDMA(MC-CDMA) 시스템의 성능을 분석한다. 제안한 시스템에 적용한 가변 전송율 알고리즘은 사용자 데이터 전송율을 순시 채널 조건의 함수로 계산하여 채널의 정보를 파악한다. 채널 상태 정보의 획득은 보다 효율적으로 데이터를 전송할 수 있게 하고 시스템의 전반적인 성능을 개선하게 한다. 본 논문에서는 제안한 가변 전송율 다중 반송파 CDMA 시스템의 성능 분석을 시뮬레이션을 통해서 검증한다. 또한 다중 반송파에 적용하는 확산부호들의 적용 가능성을 분석한다.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권10호
• /
• pp.229-238
• /
• 2021

The article applies the ECM - ARDL model to examine the relationship between economic indicators and the existence of the disease in the long run of 10 ASEAN countries from 2000 to 2019. There are two models: The first model investigates the impact of GDP per capita, net inflow FDI, unemployment rate, and inflation rate on the proportion of export to GDP of ASEAN countries, the second model is similar to the first one but adds one more variable to the independent variable list - 'the variable for disease'. The results prove the long-run effect of GDP per capita, FDI, unemployment and inflation rate on export of the selected countries, though individual country shows differences in the sign and magnitude of these impacts. Surprisingly, the number of people suffering from disease does not affect the export of all selected countries as expected. The results of the two models also indicate that the disequilibrium in the short run converges to the equilibrium in the long run with a high proportion, especially in the case of Cambodia and the Philippines, with the rate of 95.65% and 151.94%, respectively. The findings can be useful for policymakers in promulgating efficient policies to enhance the trading activities of the selected countries.