• PNF and Movement
• /
• v.20 no.2
• /
• pp.167-177
• /
• 2022

Purpose: Pes planus is a common foot deformity that involves the loss of the medial longitudinal arch. The medial longitudinal arch deformity is usually asymptomatic; however, it can lead to an increased risk of pain and injury. Low-Dye taping is designed to treat plantar heel pain and pes planus. However, low-Dye taping is relatively complex, and a considerable amount of time is required to apply the tape correctly. The purpose of this study was to compare the acute effect of two different types of taping (low-Dye taping and modified Mulligan taping) on arch reformation, plantar pressure, and gait characteristics in participants with asymptomatic flexible pes planus. Methods: Twenty subjects (9 males and 11 females; mean age = 21.95 years) with asymptomatic flexible pes planus voluntarily participated in this study. Arch reformation was evaluated using navicular height measurements. Changes in plantar pressure distribution were measured using BioRecue equipment. Gait parameters were measured using spatiotemporal data collected during consecutive gait cycles using a G-WALK device. One-way analysis of variance was used to compare the three different conditions (i.e., bare foot, low-Dye taping, and modified Mulligan taping) for each variable. Results: Navicular height was significantly increased in subjects who underwent the two types of taping compared to those who experienced the bare foot condition. The plantar pressure was significantly shifted to the posterolateral area after modified Mulligan taping compared with the bare foot condition. There were no significant differences in the gait parameters. Conclusion: The findings of this study indicate that modified Mulligan taping has a similar effect to low-Dye taping, and modified Mulligan taping is a simpler method than low-Dye taping.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.4
• /
• pp.124-130
• /
• 2023

Recently, fan out wafer level packaging, which enables high integration, miniaturization, and low cost, is being rapidly applied in the semiconductor industry. In particular, FOWLP is attracting attention in the mobile and Internet of Things fields, and is recognized as a core technology that will lead to technological advancements such as 5G, self-driving cars, and artificial intelligence in the future. However, as chip density and package size within the package increase, FOWLP warpage is emerging as a major problem. These problems have a direct impact on the reliability and electrical performance of semiconductor products, and in particular, cause defects such as vacuum leakage in the manufacturing process or lack of focus in the photolithography process, so technical demands for solving them are increasing. In this paper, warpage simulation according to the thickness of FOWLP material was performed using finite element analysis. The thickness range was based on the history of similar packages, and as a factor causing warpage, the curing temperature of the materials undergoing the curing process was applied and the difference in deformation due to the difference in thermal expansion coefficient between materials was used. At this time, the stacking order was reflected to reproduce warpage behavior similar to reality. After performing finite element analysis, the influence of each variable on causing warpage was defined, and based on this, it was confirmed that warpage was controlled as intended through design modifications.

• Clinics in Shoulder and Elbow
• /
• v.26 no.3
• /
• pp.267-275
• /
• 2023

Background: Physical therapy (PT) plays an important role in the recovery of function following anatomic total shoulder arthroplasty (aTSA). While several PT protocols have been published for these patients, there is no standardized protocol for aTSA rehabilitation. This lack of standardization may lead to confusion between patients and physicians, possibly resulting in suboptimal outcomes. This study examines how PT protocols provided by academic orthopedic surgery programs vary regarding therapeutic goals and activities following aTSA. Methods: PT protocols for aTSA available online from the Accreditation Council for Graduate Medical Education accredited orthopedic surgery programs were included for review. Each protocol was analyzed to evaluate it for differences in recommendation of length of immobilization, range of motion (ROM) goals, start time for and progression of therapeutic exercises, and timing for return to functional activity. Results: Of 175 accredited programs, 25 (14.2%) had protocols publicly available, programs (92%) recommended sling immobilization outside of therapy for an average of 4.4±2.0 weeks. Most protocols gave recommendations on starting active forward flexion (24 protocols, range 1-7 weeks), external rotation (22 protocols, range 1-7 weeks), and internal rotation (18 protocols, range 4-7 weeks). Full passive ROM was recommended at 10.8±5.7 weeks, and active ROM was 13.3±3.9 weeks, on average. ROM goals were inconsistent among protocols, with significant variations in recommended ROM and resistance exercise start times. Only 13 protocols (52%) gave recommendations on resuming recreational activities (mean, 17.4±4.4 weeks). Conclusions: Publicly available PT protocols for aTSA rehabilitation are highly variable. Level of evidence: IV.

• Korean System Dynamics Review
• /
• v.2 no.2
• /
• pp.25-40
• /
• 2001

This paper describes the forecast of power plant construction in a competitive korean electricity market. In Korea, KEPCO (Korea Electric Power Corporation, fully controlled by government) was responsible for from the production of the electricity to the sale of electricity to customer. However, the generation part is separated from KEPCO and six generation companies were established for whole sale competition from April 1st, 2001. The generation companies consist of five fossil power companies and one nuclear power company in Korea at present time. Fossil power companies are scheduled to be sold to private companies including foreign investors. Nuclear power company is owned and controlled by government. The competition in generation market will start from 2003. ISO (Independence System Operator will purchase the electricity from the power exchange market. The market price is determined by the SMP(System Marginal Price) which is decided by the balance between demand and supply of electricity in power exchange market. Under this uncertain circumstance, the energy policy planners such as government are interested to the construction of the power plant in the future. These interests are accelerated due to the recent shortage of electricity supply in California. In the competitive market, investors are no longer interested in the investment for the capital intensive, long lead time generating technologies such as nuclear and coal plants. Large unclear and coal plants were no longer the top choices. Instead, investors in the competitive market are interested in smaller, more efficient, cheaper, cleaner technologies such as CCGT(Combined Cycle Gas Turbine). Electricity is treated as commodity in the competitive market. The investors behavior in the commodity market shows that the new investment decision is made when the market price exceeds the sum of capital cost and variable cost of the new facility and the existing facility utilization depends on the marginal cost of the facility. This investors behavior can be applied to the new investments for the power plant. Under these postulations, there is the potential for power plant construction to appear in waves causing alternating periods of over and under supply of electricity like commodity production or real estate production. A computer model was developed to sturdy the possibility that construction will appear in waves of boom and bust in Korean electricity market. This model was constructed using System Dynamics method pioneered by Forrester(MIT, 1961) and explained in recent text by Sternman (Business Dynamics, MIT, 2000) and the recent work by Andrew Ford(Energy Policy, 1999). This model was designed based on the Energy Policy results(Ford, 1999) with parameters for loads and resources in Korea. This Korea Market Model was developed and tested in a small scale project to demonstrate the usefulness of the System Dynamics approach. Korea electricity market is isolated and not allowed to import electricity from outsides. In this model, the base load such as unclear and large coal power plant are assumed to be user specified investment and only CCGT is selected for new investment by investors in the market. This model may be used to learn if government investment in new unclear plants could compensate for the unstable actions of private developers. This model can be used to test the policy focused on the role of unclear investments over time. This model also can be used to test whether the future power plant construction can meet the government targets for the mix of generating resources and to test whether to maintain stable price in the spot market.

• Korean Journal of Remote Sensing
• /
• v.33 no.5_2
• /
• pp.647-659
• /
• 2017

Garlic and onion are grown in major cultivation regions that depend on the crop condition and the meteorology of the production area. Therefore, when yields are to be predicted, it is reasonable to use a statistical model in which both the crop and the meteorological elements are considered. In this paper, using a multiple linear regression model, we predicted garlic and onion yields in major cultivation regions. We used the MODIS NDVI that reflects the crop conditions, and six meteorological elements for 7 major cultivation regions from 2006 to 2015. The multiple linear regression models were suggested by using stepwise regression in the extraction of independent variables. As a result, the MODIS NDVI in February was chosen the significant independent variable of the garlic and onion yield prediction model. In the case of meteorological elements, the garlic yield prediction model were the mean temperature (March), the rainfall (November, March), the relative humidity (April), and the duration time of sunshine (April, May). Also, the rainfall (November), the duration time of sunshine (January), the relative humidity (April), and the minimum temperature (June) were chosen among the variables as the significant meteorological elements of the onion yield prediction model. MODIS NDVI and meteorological elements in the model explain 84.4%, 75.9% of the garlic and onion with a root mean square error (RMSE) of 42.57 kg/10a, 340.29 kg/10a. These lead to the result that the characteristics of variations in garlic and onion growth according to MODIS NDVI and other meteorological elements were well reflected in the model.

• The Korean Journal of Nuclear Medicine
• /
• v.34 no.2
• /
• pp.135-143
• /
• 2000

Purpose: As vesicoureteral reflux (VUR) could lead to renal functional deterioration when combined with urinary tract infection, we need to decide whether operative anti-reflux treatment should be performed at the time of diagnosis of VUR. Predictive value of radioisotope voiding cystography (RIVCG) for renal outcome was tested. Materials and Methods: In 35 children (18 males, 17 females), radiologic voiding cystoure-thrography (VCU), RIVCG and DMSA scan were performed. Change in renal function was evaluated using the follow-up DMSA scan, ultrasonography, and clinical information. Discriminant analysis was performed using individual or integrated variables such as reflux amount and extent at each phase of voiding on RIVCG, in addition to age, gender and cortical defect on DMSA scan at the time of diagnosis. Discriminant function was composed and its performance was examined. Results: Reflux extent at the filling phase and reflux amount and extent at postvoiding phase had a significant prognostic value. Total reflux amount was a composite variable to predict prognosis. Discriminant function composed of reflux extent at the filling phase and reflux amount and extent at postvoiding phase showed better positive predictive value and specificity than conventional reflux grading. Conclusion: RIVCG could predict renal outcome by disclosing characteristic reflux pattern during various voiding phases.

• Journal of Distribution Research
• /
• v.15 no.2
• /
• pp.71-99
• /
• 2010

Most of studies on patriotism in the marketing area have focused on ethnocentric tendencies observed in consumption behaviors. On the contrary, there have been few empirical studies on how patriotism in the general sense, indicating affection for, attachment to, and pride in the country, influences consumers' evaluation of domestic and foreign products. Given the current situation that marketing activities appealing to people's patriotism is increasing, this is somewhat surprising. Thus, this study examined empirically how patriotism influences people's evaluation of domestic and foreign products. In addition, we tested whether consumer ethnocentrism works as an intervening variable in the relation between patriotism and product evaluation. The empirical analysis was conducted through a questionnaire survey of undergraduate and graduate students at universities in Seoul. The survey asked about the respondents' patriotism, consumer ethnocentrism, domestic product evaluation, foreign product evaluation, and demographical characteristics. In foreign product evaluation, the respondents were requested to evaluate Chinese and Japanese products. Email was used to send and recover the questionnaires, and 135 replies were used in the analysis. Major findings from the empirical analysis are as follows. First, a significant relationship was observed between patriotism and domestic product evaluation. That is, patriotic participants evaluated domestic products more favorably. On the other hand, no significant relationship was observed between patriotism and foreign product evaluation(See Table 1-1 and 1-2). Next, the effect of patriotism on domestic product evaluation was mediated by consumer ethnocentrism. However, whether the effect of patriotism on domestic product evaluation is mediated by consumer ethnocentrism partially or fully was different according to product(See Table 2-1 and 2-2). Lastly, we tried to analyze the relation between consumer ethnocentrism and product evaluation and comparing the results with findings of previous researches. According to the results, a significant relationship was observed between consumer ethnocentrism and domestic product evaluation but not between consumer ethnocentrism and foreign product evaluation. The meanings of this study are as follows. First, there have been few marketing studies that investigated the relation between patriotism and product evaluation. Thus, this study is meaningful in that it supplemented the limitation of previous research. Second, consumer ethnocentrism was found to mediate the relation between patriotism and domestic product evaluation. Considering the absence of previous research that examined the role of consumer ethnocentrism as an intervening variable, this study is significant in that it expanded the scope of research on consumer ethnocentrism. Third, from the practical aspect, the results of this study suggest that marketing appealing to patriotism is effective in stimulating consumers' purchase and consumption of domestic products. Accordingly, such a marketing strategy is expected to be effective in protecting domestic markets from imported goods and overseas brands and to increase demands for domestic products and brands. However, there is the question of whether the effect of patriotism based marketing strategies in promoting demand for domestic products would persist. That is, this study could not find a significant relation between patriotism and foreign product evaluation, and this means that the increase in patriotism for the home country does not damage people's view to the quality of foreign products negatively. Accordingly, without change in people's perception of foreign products, it is highly likely that the increase in demand for domestic products or brands induced by patriotism elevated at a specific time or situation may not last long. Fourth, the results of this study suggest that the patriotism level may influence consumers' choice behavior toward retailers strongly connected to a specific country or region. That is, consumers with high level patriotism may hesitate or avoid using a retailer associated with some foreign country. Fifth, according to the results of this study, when people's patriotism is stimulated by a specific social situation or event, it can be an opportunity for domestic franchise brands to increase their market performance such as sales and market share and, at the same time, for foreign franchise brands to experience adversities. Therefore, during a period like the Olympic Games or the World Cup when people's sense of belonging or attachment to their country is heightened, domestic franchise brands need to make marketing activities that may lead market opportunities to substantial results and foreign franchise brands to cope with such adversities. Sixth, consumers' brand choice is often made in retail stores. It has been demonstrated by numerous studies that in store stimuli such as point of purchase display can affect consumers' behavior. Considering this, domestic brands facing competition with foreign brands should make continuous efforts to enhance the market performance of their products through developing in store stimuli that can stimulate consumers' patriotism. Finally, based on the major findings of this study, both academic and practical issues were discussed. Suggestions for future studies were provided.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.5
• /
• pp.619-628
• /
• 2010

Shape Memory Alloy (SMA) has recently received attention in developing implantable surgical equipments and it is expected to lead the future medical device market by adequately imitating surgeons' flexible and delicate hand movement. However, SMA actuators have not been used widely because of their nonlinear behavior called hysteresis, which makes their control difficult. Hence, we propose a parameter, $t_1$, which is necessary for temperature control, by analyzing the open-loop step response between current and temperature and by comparing it with the values of linear differential equations. $t_1$ is a pole of the transfer function in the invariant linear model in which the input and output are current and temperature, respectively; hence, $t_1$ is found to be related to the state variable used for temperature control. When considering the parameter under heat treatment conditions, $T_{max}$ was found to assume the lowest value, and $t_1$ was irrelevant to the heat treatment.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.2
• /
• pp.191-198
• /
• 2015

Objective : The purpose of this study was to conduct biomechanical analysis of varying backpack loads on the lower limb movements during downhill walking over $-20^{\circ}$ ramp. Method : Thirteen male university students (age: $23.5{\pm}2.1yrs$, height: $175.7{\pm}4.6cm$, weight: $651.9{\pm}55.5N$) who have no musculoskeletal disorder were recruited as the subjects. Each subject walked over $20^{\circ}$ ramp with four different backpack weights (0%, 10%, 20% and 30% of body weight) in random order at a speed of $1.0{\pm}0.1m/s$. Five digital camcorders and two force plates were used to obtain 3-d data and kinetics of the lower extremity. For each trial being analyzed, five critical instants were identified from the video recordings. Ground reaction force, loading rate, decay rate, and resultant joint moment of the ankle and the knee were determined by the inverse dynamics analysis. For each dependent variable, one-way ANOVA with repeated measures was used to determine whether there were significant differences among four different backpack weight conditions (p<.05). When a significant difference was found, post hoc analyses were performed using the contrast procedure. Results : The results of this study showed that the medio-lateral GRFs at RHC in 20% and 30% body weight were significantly greater than the corresponding value in 0% of body weight. A consistent increase in the vertical GRFs as backpack loads increased was observed. The valgus joint movement of the knee at RTO in 30% body weight was significantly greater than the corresponding values in 0% and 10% body weight. The increased valgus moment of 30% body weight observed in this phase was associated with decelerating and stabilizing effects on the knee joint. The results also showed that the extension and valgus joint moments of the knee were systematically affected by the backpack load during downhill walking. Conclusion : Since downhill walking while carrying heavy external loads in a backpack may lead to excessive knee joint moment, damage can occur to the joint structures such as joint capsule and ligaments. Therefore, excessive repetitions of downhill walking should be avoided if the lower extremity is subjected to abnormally high levels of load over an extended period of time.

• KDI Journal of Economic Policy
• /
• v.35 no.4
• /
• pp.31-61
• /
• 2013

The purpose of this study is to calculate the economic value of transport demand forecasting risks in the road PPP project. Under the assumption that volatility of the road PPP project value occurs only in regard with uncertainty of traffic volume forecasting, this study calculates the economic value of the traffic forecasting risks in the case of the road PPP project. To that end, forecasted traffic volume is assumed to be a stochastic variable and to follow the Geometric Brownian motion as time passes. In particular, this study attempts to differentiate itself from existing studies that simply use an arbitrary assumption by presenting the application of different traffic volume growth volatility and the rates before and after the ramp-up period. Analysis of the case projects reveals that the risk premium related to traffic volume forecast of the project turns out as 7.39~8.30%, without considering option value-such as minimum revenue guarantee-while the project value volatility caused by transport demand forecasting risks is 17.11%. As the discount rate grows higher, the project value volatility tends to decrease and volatility in project value is always suggested to be larger than that in transport volume influenced by leverage effect due to fixed expenditure. The market value of transport demand forecasting risk-calculated using the project value volatility and risk premium-is analyzed to be between 0.42~0.50, implying that a 1% increase or decrease in the transport amount volatility would lead to a 0.42~0.50% increase or decrease in risk premium of the project.