• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.19-24
• /
• 2003

This paper is to research the heat transfer characteristic in copper-water variable conductance heat pipes(VCHP) with a non-condensable gas and gas reservoir. The heat transfer characteristics in the VCHP have not yet been studied much researches. VCHP are used in many applications. These applications range from thermal control of components and systems on satellites, to precise temperature calibration duties, conventional electronics temperature control and thermal diodes. The practical use of VCHP is a simple way to control the temperature of satellites. As the quantity of NCG was increased, there was an increase in the saturation vapor temperatures. As the input heat has loaded from 90 W to 110 W, the difference of the evaporator surface is lower than $10^{\circ}C$.

• Journal of Biosystems Engineering
• /
• 제32권6호
• /
• pp.383-388
• /
• 2007

In precision farming, proper calibration and operation of a variable rate machine are critical to reduce input of agrochemicals and to ensure productivity and quality of agricultural products. As an effort to introduce precision farming to rice production in Korea, a pneumatic granular applicator was developed. This investigation intended to evaluate the application performance such as application accuracy, application uniformity and to suggest how to adjust the blow-heads to get uniform application pattern, and to suggest a practical way of adjustment of the blow-heads for uniform application. Tests to evaluate the application performance were conducted. The application uniformities (CV) in both transverse direction and longitudinal direction were less than 15% and application accuracy was greater than 81%. A simple method for adjusting the inserting length of blow-heads was suggested.

• 제어로봇시스템학회논문지
• /
• 제17권3호
• /
• pp.264-268
• /
• 2011

This paper presents a Takagi-Sugeno (T-S) type Fuzzy Logic Controller (FLC) with only 3 rules. The choice of parameters of FLC is very difficult job on design FLC. Therefore, the choice of appropriate linguistic variable is an important part of the design of fuzzy controller. However, since fuzzy controller is nonlinear, it is difficult to analyze mathematically the affection of the linguistic variable. So this choice is depend on the expert's experience and trial and error method. In this paper, we propose the method to choose the consequence linear equation's parameter of T-S type FLC. The parameters of consequence linear equations of FLC are tuned according to the system error that is the input of FLC. The full equation of T-S type FLC is presented and using this equation, the relation between output and parameters can represented. The parameters are tuned with gradient algorithm. The parameters are changed depending on output. The simulation results demonstrate the usefulness of this T-S type 3 rule fuzzy controller.

• 전기전자학회논문지
• /
• 제9권1호
• /
• pp.47-56
• /
• 2005

본 연구에서는 불확실성과 부하 변동 하에 브러쉬없는 직접구동 전동기의 정확한 사전결정 추적성능을 제공하기 위한 새로운 개선된 강인한 가변구조 추적 제어기를 설계하였다. 리칭 페이즈를 제거하기 위한 특수 적분 슬라이딩 변은 서보 전동기의 초기 위치부터 이상 슬라이딩 모드와 가상 이상 슬라이딩 궤적을 정의한다 . 영이 아닌 슬라이딩 면에 의하여 발생되는 추적오차를 유도하였다. 외란 관측기를 갖는 연속 입력을 제안하여 불확실성과 부하 변동 하에 사전 결정 가상 이상 슬라이딩 궤적을 사전 값 내에 추적하도록 한다. 제안된 알고리듬의 유용성을 부하 변동 하에 브러쉬없는 직접구동 전동기에 대한 비교 시뮬레이션으로 입증한다.

• 설비공학논문집
• /
• 제11권2호
• /
• pp.193-204
• /
• 1999

Performance of a variable-speed, roller-type vane compressor was evaluated at low evaporating temperature. First, an experimental investigation was conducted to examine the performance variation as functions of both outdoor temperature and rotating speed. For this purpose, a typical heat pump was implemented as a test apparatus to measure mass flow rate and power input. Secondly, computational investigations corresponding to the heat pump test conditions were performed to predict compressor performance using ORNL Map-Based compressor model. Results obtained from the heat-pump experiments showed that both mass flow rate and power consumption were sensitively dependent on both evaporating temperature and compressor speed as was predicted from the computational results. From the comparisons of both experimental and computational results, it was well recognized that the ORNL model was subjected to larger error in the accuracy of prediction as outdoor temperature decreased. When the outdoor temperature was above $-5^{\cire}C$, errors of predicted values corresponding to both mass flow rate and power consumption were estimated as $\pm$10% and $\pm$ 15%, respectively. Finally, it is suggested that the ORNL model needs to be re-evaluated if compressor map data tested below $-5^{\cire}C$(in evaporating temperature) are available.

• 대한전자공학회논문지TC
• /
• 제48권5호
• /
• pp.33-39
• /
• 2011

두명의 사용자를 위한 무선 통신에서 심볼 간 간섭 및 다중 접속 간섭을 최소화하는 유동적인 전송률 back-off 적용 지연 time reversal (TR) 기법의 성능을 평가하였다. 지연 TR 기법의 성능을 기존 full-rate TR과 full back-off TR의 성능과 비교하였으며, guard interval이 1보다 큰 경우 비트오차율 측면에서 지연 TR 기법의 성능이 full-rate TR이나 full back-off TR보다 우수함을 확인하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.211-224
• /
• 2019

This paper deals with a nonlinear controller based on saturation functions with variable parameters for set-point regulation and trajectory tracking control of an Autonomous Underwater Vehicle (AUV). In many cases, saturation functions with constant parameters are used to limit the input signals generated by a classical PD (Proportional-Derivative) controller to avoid damaging the actuators; however this abrupt bounded harms the performance of the controller. We, therefore, propose to replace the conventional saturation function, with constant parameters, by a saturation function with variable parameters to limit the signals of a PD controller, which is the base of the nonlinear PD with gravitational/buoyancy compensation and the nonlinear PD + controllers that we propose in this paper. Consequently, the mathematical model is obtained, considering the featuring operation of the underwater vehicle LIRMIA 2, to do the stability analysis of the closed-loop system with the proposed nonlinear controllers using the Lyapunov arguments. The experimental results show the performance of an AUV (LIRMIA 2) for the depth control problems in the case of set-point regulation and trajectory tracking control.

• ETRI Journal
• /
• 제45권2호
• /
• pp.213-225
• /
• 2023

Physical layer security (PLS) can improve the security of both terrestrial and nonterrestrial wireless communication networks. This study proposes a simplified framework for nonterrestrial cyclic prefixed orthogonal variable spreading factor (OVSF)-encoded multiple-input and multiple-output nonorthogonal multiple access (NOMA) systems to ensure complete network security. Various useful methods are implemented, where both improved sine map and multiple parameter-weighted-type fractional Fourier transform encryption schemes are combined to investigate the effects of hybrid PLS. In addition, OVSF coding with power domain NOMA for multi-user interference reduction and peak-toaverage power ratio (PAPR) reduction is introduced. The performance of $\frac{1}{2}$-rated convolutional, turbo, and repeat and accumulate channel coding with regularized zero-forcing signal detection for forward error correction and improved bit error rate (BER) are also investigated. Simulation results ratify the pertinence of the proposed system in terms of PLS and BER performance improvement with reasonable PAPR.

• 소성∙가공
• /
• 제32권6호
• /
• pp.352-359
• /
• 2023

Recently, independent suspension systems have been applied not only to passenger cars but also to large commercial vehicles. Therefore, the need for research to domestically produce such independent suspensions for large commercial vehicles is gradually increasing. In this paper, we conducted research on the manufacturing technology of the relay lever, which are integral components of independent suspension systems for large commercial vehicles. Our goal was to reduce the flash volume generated during the forging process. The shape variables of the initial billet were adjusted to find proper forming conditions that could minimize flash volume while performing product forming smoothly. Shape variables were set as input variables and the flash volume was set as an output variable, and simulations were carried out to analytically predict the volume of the flash area for each variable condition. Based on the data obtained through numerical simulations, a regression model and an artificial neural network model were used to develop a prediction model that can easily predict the flash volume for variable conditions. For the corresponding prediction model, a goodness of-fit test was performed to confirm a high level of fit. By comparing and analyzing the two prediction models, the high level of fit of the ANN model was confirmed.

• Journal of the Korean Wood Science and Technology
• /
• 제28권1호
• /
• pp.8-17
• /
• 2000

낙엽송을 이용하여 구조용 집성재를 제조하였다. 핑거 조인트나 라미나의 강도 등의 인자들이 집성재의 강도적 성질에 영향하는 바를 조사하였다. 집성재의 강도적 성질 예측을 위해 입력변수로 라미나의 MOE만을 사용하였을 때는 실측치와 예측치 사이의 차이가 라미나의 개수가 증가함에 따라 커졌는데 이것은 라미나의 성질의 변이가 집성재의 강도에 영향하는 바가 라미나의 개수 증가에 따라 누적되기 때문이다. 따라서, 집성재의 MOR을 예측하기 위해서는 좀더 신중한 접근법이 필요하였다. 입력변수의 영향을 비교하기 위하여 라미나의 MOE와 MOR을 동시에 입력변수로 사용하였다. 핑거접합을 실시한 라미나가 인장측에 배치되었을 때 집성재의 MOE는 라미나의 MOE 값에 상당한 변이가 존재하고 옹이에 대한 자료가 충분치 않아서 약간의 영향을 받았다. 핑거 접합을 실시한 라미나가 인장측에 배치되지 않았을 경우에는 인장측에 배치된 경우보다 더 정확한 예측이 가능하였다. 이러한 결과를 종합하면, 핑거 접합과 옹이를 동시에 고려하였을 경우 좀 더 정확한 집성재의 강도적 성질 예측이 가능할 것으로 판단된다.