• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.736-741
• /
• 1998

It is well known that an encoder or a resolver is necessary to obtain the position data for speed or position control Generally utilized speed sensors are mal-affected by the EMI, dusty, and high temperature surroundings. Therefore, the speed and position sensorless controls using observers have been studied widely. In this paper, the binary observer which is composed of two feedback regulation loops to control the speed of SRM(Switched Reluctance Motor) is applied. One loop compensates the control input directly like the sliding mode control, and the other one compensates the system parameters indirectly. This observer is constructed on the foundation of variable structure control on the foundation of variable structure control theory and has the inertial term for the varying parameter. The validities of this proposed method is proved by experiments.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.36.2-36.2
• /
• 2011

In variable-speed variable-pitch wind turbines, the conventional approach for controlling power-production operation relies on a generator-torque controller and a rotor-collective blade-pitch controller. Both controllers use the generator speed measurement as the sole feedback input. In order to mitigate unwanted excitation of the control system, many filters are adopted. In this study, the characteristics of some filters for signal processing are investigated based on frequency response function. They include low-pass filters, band-pass filters, and notch filters. Especially, this study focuses on design parameters of their filters.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.552-554
• /
• 1987

A design principles of discontinuous control are studied and then are applied to position control of D. C. sevo drive fed by a four-quadrant chopper. Variable structure control with sliding mode gives fast dynamic response with no overshoot. And the resulting system bas good robust properties independent of the wide variations of electrical, mechanical parameters and external disturbances without any system identification. But the high frequency chatter component of control input in the sliding mode is undesirarable. A continuous control law that is a approximation to discontinuous control law is used for design.

• 전산구조공학
• /
• 제2권4호
• /
• pp.111-116
• /
• 1989

구조설계에 작용되는 하중과 이로 인한 동적거동의 측정기록을 바탕으로 하여 구조계의 미지계수 행렬을 추정하는 방법에 대하여 연구하였다. 이를 위하여 통상 미분방정식으로 주어지는 운동방정식을 ARMAX 모형식으로 변환시켜 ARMAX 식의 계수행렬을 추정한 후, 이로부터 운동방정식의 계수행렬을 구하였다. ARMAX 계수의 추정은 최소자승법, Instrumental Variable방법, Maximum Likelihood방법 및 Limited Information Maximum Likelihood방법을 사용하여 수행하였으며, 지진 하중을 받는 3층 건물 모형을 예제로 하여 각 방법의 효율성을 비교분석하였다.

• Journal of Welding and Joining
• /
• 제10권2호
• /
• pp.32-42
• /
• 1992

A method of optimization of process parameters in Arc Welding has been discussed in this paper. The method of investigation is based on the numerical calculation of weld bead by a finite element method and non-linear optimization technique is applied to estimated the optimization process parameters from the numerical calculation. The common package program(ANSYS 4.4A) was used to obtain the process parameters for a thin plate arc welding (TIG, CO$_{2}$). The results on some test are satisfactory and the used method of this paper is a useful guide to the optimum welding condition.

• 수산경영론집
• /
• 제47권2호
• /
• pp.1-14
• /
• 2016

This study applied the Stochastic Frontier Analysis to estimate which independent variable affects to efficiency of aquaculture household. This study used wage and facility scale as input variables, sales volume as an output variable to estimate efficiency. Also, the study used region, species, water quality to estimate technical inefficiency factors of the model. The data used for this study were obtained by the operating costs survey using 1:1 interview method. The study selected translog production model with technical inefficiency term estimated as half-normal distribution. In addition, the study used pearson and spearman correlation coefficient among efficiency estimating models. Also, the study analysed differences among estimated efficiencies through t-test, and showed us 0.1793 in species, 0.4677 between Geojae and Masan.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2002년도 춘계학술대회
• /
• pp.81-89
• /
• 2002

EPC seeks to minimize variability by transferring the output variable to a related process input(controllable) variable, while SPC seeks to reduce variability by detecting and eliminating assignable causes of variation. In the case of product control, a very reasonable objective is to try to minimize the variance of the output deviations from the target or set point. We consider an alternative EPC model with second-order autoregressive disturbance. We compare three control systems； EPC, EPC combined with EWMA, and Shewhart. This paper shows through simulation that the performance of the integrated model of EPC and SPC is more preferable than that of EPC.

• 대한안전경영과학회지
• /
• 제13권4호
• /
• pp.225-235
• /
• 2011

Autoregressed Controller, which have trend algorithm, seeks to minimize variability by transferring the output variable to the related process input variable, while multivariate process control techniques seek to reduce variability by detecting and eliminating assignable causes of variation. In the case of process control, a very reasonable objective is to try to minimize the variance of the output deviations from the target or set point. We also investigate algorithm with relevant Shewhart chart, Theoretical control charts, precontrol and process capability. To help the people who want to make the theoretical system, we compare the main techniques in "a study on the relation between multivariate process control techniques and trend algorithms".

• 대한전기학회논문지:전력기술부문A
• /
• 제52권8호
• /
• pp.450-456
• /
• 2003

This paper proposes a multiple time-series model with dummy variables for one-hour ahead load forecasting. We used 11 dummy variables that were classified by day characteristics such as day of the week, holiday, and special holiday. Also, model specification and selection of input variables including dummy variables were made by test statistics such as AIC(Akaike Information Criterion) and t-test statistics of each coefficient. OLS (Ordinary Least Squares) method was used for estimation and forecasting. We found out that model specifications for each hour are not identical usually at 30％ of optimal significance level, and dummy variables reduce the forecasting error if they are classified properly. The proposed model has much more accurate estimates in forecasting with less MAPE (Mean Absolute Percentage Error).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1351-1353
• /
• 2000

In this paper, it is proposed to constant power control of solar power system. The solar power system has disadvantage that low power density and variable power output. Proposed strategy is controled by DC/DC converter using phase shift PWM and I-PD type control applying type 1 digital system. The validity of proposed control strategy is verified from simulations results using PSIM.