• Journal of Korea Water Resources Association
• /
• v.38 no.4 s.153
• /
• pp.281-292
• /
• 2005

The water balance analysis for the long-term water resources plan is a simple calculation that compares water demands with possible water supplies. For a watershed being considered the reports on the performance of the water balance analysis, however, have shown inconsistent results and thus have not earned credibility due to the uncertainty of the data acquired and models used. In this research, uncertainties in the water scarcity estimate were assessed through probability representation based on the Monte Carlo simulation using Latin Hypercube Sampling (LHS). The natural flow, municipal demand, industrial demand, agricultural demand, and return flow rate were selected as representative input variables for the water balance analysis, and their distributions were set based on the linear regression and the entropy theory. The statistical properties of the output variable samples were analyzed in comparison with a deterministic estimate of the water scarcity of an existing study. Application of LHS to three sub-basins of the Geum river basin showed the deterministic estimate could be overestimated or underestimated. The sensitivity analysis as well as the uncertainty analysis found that the return flow rate of the agricultural water is the most uncertain but is rarely sensitive to the output of the water balance analysis.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.172-172
• /
• 2011

The interaction between land surface and atmosphere is essentially affected by hydrometeorological variables including soil moisture. Accurate estimation of soil moisture at spatial and temporal scales is crucial to better understand its roles to the weather systems. The KLDAS(Korea Land Data Assimilation System) is a regional, specifically Korea peninsula land surface information systems. As other prior land data assimilation systems, this can provide initial soil field information which can be used in atmospheric simulations. For this study, as an enabling high-resolution tool, weather research and forecasting(WRF-ARW) model is applied to produce precipitation data using GFS(Global Forecast System) with GFS embedded and KLDAS soil moisture information as initialization data. WRF-ARW generates precipitation data for a specific region using different parameters in physics options. The produced precipitation data will be employed for simulations of Hydrological Models such as HEC(Hydrologic Engineering Center) - HMS(Hydrologic Modeling System) as predefined input data for selected regional water responses. The purpose of this study is to show the impact of a hydrometeorological variable such as soil moisture in KLDAS on hydrological consequences in Korea peninsula. The study region, Chongmi River Basin, is located in the center of Korea Peninsular. This has 60.8Km river length and 17.01% slope. This region mostly consists of farming field however the chosen study area placed in mountainous area. The length of river basin perimeter is 185Km and the average width of river is 9.53 meter with 676 meter highest elevation in this region. We have four different observation locations : Sulsung, Taepyung, Samjook, and Sangkeug observatoriesn, This watershed is selected as a tentative research location and continuously studied for getting hydrological effects from land surface information. Simulations for a real regional storm case(June 17~ June 25, 2006) are executed. WRF-ARW for this case study used WSM6 as a micro physics, Kain-Fritcsch Scheme for cumulus scheme, and YSU scheme for planetary boundary layer. The results of WRF simulations generate excellent precipitation data in terms of peak precipitation and date, and the pattern of daily precipitation for four locations. For Sankeug observatory, WRF overestimated precipitation approximately 100 mm/day on July 17, 2006. Taepyung and Samjook display that WRF produced either with KLDAS or with GFS embedded initial soil moisture data higher precipitation amounts compared to observation. Results and discussions in detail on accuracy of prediction using formerly mentioned manners are going to be presented in 2011 Annual Conference of the Korean Society of Hazard Mitigation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.2
• /
• pp.16-23
• /
• 2006

This paper presents a novel single-stage high frequency resonant inverter link type DC-DC converter using zero voltage switching with high power-factor. The proposed topology is integrated half-bridge boost rectifier as power factor corrector(PFC) and half-bridge high frequency resonant converter into a single-stage. The input stage of the half-bridge boost rectifier works in discontinuous conduction mode(DCM) with constant duty cycle and variable switching frequency. So that a boost converter makes the line current follow naturally the sinusoidal line voltage waveform. Simulation results have demonstrated the feasibility of the proposed high frequency resonant converter. Characteristics values based on characteristics analysis through circuit analysis is given as basis data in design procedure. Also, experimental results are presented to verify theoretical discussion. This proposed inverter will be able to be practically used as a power supply in various fields as induction heating applications, fluorescent lamp and DC-DC converter etc.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.1
• /
• pp.36-44
• /
• 2015

The spatial and temporal distribution of dissolved trace metals has been studied to identify trends in space and time and to evaluate the pollution status in a semi-closed bay (Gohyun bay), Korea. Surface seawater samples were collected over four seasons at 18 stations in the bay between 2003 and 2004 and once at 7 stations around a large shipyard in May 2004. The concentration of Cd, Co, Cu, Ni, Pb, and Zn in seawater in February and May were highly variable in space, showing the higher value relative to other season. Those metals concentrations were decreased from inner-to outer-stations. In around the shipyard, Cu, Pb and Zn showed the higher variability depending on time. Cu and Zn concentrations at the sites around the shipyard had 2 times higher values compared with the average of inner stations in Gohyun bay. The very high correlations between salinity and either Cu and Zn has been showed. Especially, there was a significant relationship between Cu and Zn. We recognize that the shipyard is major source of Cu and Zn in seawater. Therefore, marine environment management policy such as the prevention and control of heavy metal input from a shipyard is required.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.466-475
• /
• 2020

Current performance evaluation of call center employees is dependent on the number of calls they have resolved, regardless of the individual and social characteristics of employees. However, since call center tasks are highly customer-oriented and emotional laborious, individual capability as well as social characteristics of employees is critical to performance. Therefore, this study analyzed the relationship between employees' individual/social characteristics and their performance. To extract individual characteristics, a repertory grid technique was employed, whereas social network analysis was conducted to extract the social characteristics of employees. Using individual and social characteristics as input variables, multiple regression was conducted to analyze the effect of each variable on performance. As a result, in-degree centrality of dining network, initiative characteristics, open characteristics, and enjoyment of studying were determined to be important variables for performance. This study is expected to be used in both performance management and human resource management of call center practices.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5843-5848
• /
• 2011

To improve the efficiency of the channel spectrum and to reduce the power consumption of the system in EVRC, the voice signal is compressed and transmitted only when the user speaks to. In addition to this, voice frames are divided into three rates 1, 1/2 and 1/8 and each frame is handled differently. For example, we assumed that the input is silence region if the 1/8 rate is used. In this paper, the sections are firstly separated into the voiced speech signal region, unvoiced speech signal region, and silence region by using distribution characteristics of LSP parameters. Then the paper suggested to encode 1 rate for the voiced speech signal, 1/2 rate for the unvoiced speech signal region, 1/8 rate for the silence region. In other words, traditional way of transmission is used when sending full rate in the EVRC. However, when sending half rate, the voice is firstly distinguished between voiced and unvoiced. If the voice is distinguished as voiced, voice is converted into full rate before the transmission. If it is distinguished as silence, EVRC's basic rate is applied. In the experimental results with SNR, ASDM, transmission bit rate measurement, we have demonstrated that voice quality was improved by using the proposed algorithm.

• Journal of Korea Multimedia Society
• /
• v.10 no.8
• /
• pp.1068-1077
• /
• 2007

This paper proposes a method that extracts characteristics of cracks such as length, thickness and direction from a concrete slab surface image with image processing techniques. These techniques extract the cracks from the concrete surface image in variable conditions including bad image conditions) using the ART2-based RBF network to recognize the dominant directions -45 degree, 45 degree, horizontal and vertical) of the extracted cracks from the automatically calculated specifications like the lengths, directions and widths of the cracks. Our proposed extraction algorithms and analysis of the concrete cracks used a Robert operation to emphasize the cracks, and a Multiple operation to increase the difference in brightness between the cracks and background. After these treatments, the cracks can be extracted from the image by using an iterated binarization technique. Noise reduction techniques are used three separate times on this binarized image, and the specifications of the cracks are extracted form this noiseless image. The dominant directions can be recognized by using the ART2-based RBF network. In this method, the ART2 is used between the input layer and the middle layer to learn, and the Delta learning method is used between the middle layer and the output layer. The experiments using real concrete images showed that the cracks were effectively extracted, and the Proposed ART2-based RBF network effectively recognized the directions of the extracted cracks.

• Journal of Korea Technology Innovation Society
• /
• v.10 no.1
• /
• pp.47-72
• /
• 2007

Ideas do not become exhausted, and there are no diminishing returns in the creation of knowledge. Nonetheless, growth ultimately ceases in this simplest model of endogeneous innovation. The reasons are similar to those that are discussed in the context of the neoclassical model of capital accumulation. Even if the resource cost of creating new goods does not rise, the economic return to invention may decline as the number of available products increases. When the rate of return to R&D falls to the level of the discount rate, private agents cease to be willing to defer consumption in order to invest in product development. But, if we treat knowledge capital as a public capital considering of its non-appropriable benefits, economic growth can be sustained in the economy. Romer(1986) has pointed out that growth might be sustainable if the accumulation of knowledge is not subject to long-run diminishing returns. Actually Romer assumed diminishing returns in the production of private knowledge from available resources, but increasing returns in the production of output from labor and total (public and private) knowledge. His condition for the sustainability of long-run growth amounts to an assumption that the diminishing returns in the former activity do not outweigh the increasing returns in the latter. The Johansen(1988) cointegration test method is used for finding long-run equilibrium relationship between R&D input and the product innovation. Test results indicate the existence of cointegrating equation between each pair of regression variables including dependent variable in the knowledge production function. And, the signs of cointegrating vectors are well accord to the prediction of sustainable growth. In the empirical analysis, from all cases of the form for the knowledge production function, we could not reject the null hypothesis that R&D spillover effect is significant($H_{0}:\;{\gamma}=1$). In summary, we showed that considering goodness of fit of regression model, we can see that the empirical evidence is strongly in favor of the character of knowledge as the public knowledge capital. So, we can expect that by product innovation, economic growth can be sustained in the Korean economy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.410-420
• /
• 2016

Recently, the R&D paradigm has become oriented toward convergence technology and interdisciplinary research. In this study, to elucidate the characteristics of research groups that promote the performance of convergence research, we take into account the input characteristics, disciplinary characteristics and collaborative characteristics of research groups. For this study purpose, 5,217 SCI papers published from 104 centers in Advanced Research Center Projects are analyzed as research outputs. The research findings are that the disciplinary balance in the interdisciplinary characteristics and the number of partners in the collaborative characteristics are positively related to the convergence of R&D outputs. The research field of a group introduced as a control variable exerts a significant effect on the convergent R&D outputs. In conclusion, it is necessary to organize internally with the same number of each disciplinary researcher in a research group and to activate external collaboration with partners in order to produce more outputs of convergent research.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.59-67
• /
• 2017

This study analyzes the efficiency of oriental hospitals using DEA(Data Envelopment Analysis). The input variables include the numbers of doctors, nurses, medical technicians, and beds. The output variable iscomprised of the sales account. The analysis tools used are EnPas and IBM SPSS Statistics 19. As a result of efficiency analysis, the private hospitals(establishment), less than 10 years in operation(operating period), containing less than 50 beds (number of the beds), located in the metropolitan area(location) showed high efficiency in the BCC(Banker, Charnes & Cooper) model, but indicated relatively low efficiency in CCR(Charnes, Cooper & Rhodes) model. This contradictory result is caused by inefficiencies in hospital size. The logistic regression analysis conducted to analyze the variables that affect the efficiency of oriental hospitals found that the efficiency decreased by 0.955 with each increase of 1 bed in the hospital.