• Corrosion Science and Technology
• /
• v.20 no.2
• /
• pp.62-68
• /
• 2021

Artificial neural network techniques show an excellent ability to predict the data (output) for various complex characteristics (input). It is primarily specialized to solve nonlinear relationship problems. This study is an experimental investigation that applies artificial neural network techniques and an experimental design to predict the cyclic polarization curves of the super-austenitic stainless steel AL-6XN alloy with sensitization. A cyclic polarization test was conducted in a 3.5% NaCl solution based on an experimental design matrix with various factors (degree of sensitization, temperature, pH) and their levels, and a total of 36 cyclic polarization data were acquired. The 36 cyclic polarization patterns were used as training data for the artificial neural network model. As a result, the supervised learning algorithms with back-propagation showed high learning and prediction performances. The model showed an excellent training performance (R²=0.998) and a considerable prediction performance (R²=0.812) for the conditions that were not included in the training data.

• Tribology and Lubricants
• /
• v.35 no.1
• /
• pp.71-76
• /
• 2019

The differential planetary gear reducer as a main component of the concrete mixer driving mechanism requires a strong torque to mix concrete compounds. As this component is currently dependent on imports, it is necessary to develop it by conducting a study on vibration analysis and the resonance problem. The noise and vibration of a concrete mixer reducer increase owing to the transmission error of planetary gears, and the damage of components occurs owing to the problems in design and production. In this study, the tooth-passing frequency is calculated to evaluate the noise and vibration of a mixer reducer, and a fast Fourier transform (FFT) analysis is conducted through a vibration test using an acceleration sensor. The vibration of the reducer is measured at three points of input and output of the shaft and planetary gear housing with fixed and variable revolutions per minute. The operating conditions of gears and bearings are evaluated by performing the FFT analysis, and the resonance problem is verified. The results show that No. 1 pinion and ring gears revolve disproportionately. The amplitude values appear high, and the wear of tooth faces occur in tooth-passing frequencies and harmonic components of No. 1 and No. 2 pinion-ring gears. Therefore, we conclude that design changes in the reducer and a correction of tooth profiles are required.

• Computers and Concrete
• /
• v.24 no.2
• /
• pp.137-150
• /
• 2019

In this paper, surrogate models such as multivariate adaptive regression splines (MARS) and M5P model tree (M5P MT) methods have been investigated in order to propose a new formulation for the 28-days compressive strength of self-compacting concrete (SCC) incorporating metakaolin as a supplementary cementitious materials. A database comprising experimental data has been assembled from several published papers in the literature and the data have been used for training and testing. In particular, the data are arranged in a format of seven input parameters covering contents of cement, coarse aggregate to fine aggregate ratio, water, metakaolin, super plasticizer, largest maximum size and binder as well as one output parameter, which is the 28-days compressive strength. The efficiency of the proposed techniques has been demonstrated by means of certain statistical criteria. The findings have been compared to experimental results and their comparisons shows that the MARS and M5P MT approaches predict the compressive strength of SCC incorporating metakaolin with great precision. The performed sensitivity analysis to assign effective parameters on 28-days compressive strength indicates that cementitious binder content is the most effective variable in the mixture.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.1
• /
• pp.31-44
• /
• 2019

The main objective of this research is to develop a hydroclimate drought index (HCDI) using the gridded climate data inputs in a Variable Infiltration Capacity (VIC) modeling platform. Typical drought indices, including, Standardized Precipitation Index (SPI), Standardized Precipitation Evapotranspiration Index (SPEI), and Self-calibrated Palmer Drought Severity Index (SC-PDSI) in South Korea are also used and compared. Inverse Distance Weighting (IDW) method is applied to create the gridded climate data from 56 ground weather stations using topographic information between weather stations and the respective grid cell ($12km{\times}12km$). R statistical software packages are used to visualize HCDI in Google Earth. Skill score (SS) are computed to evaluate the drought predictability based on water information derived from the observed reservoir storage and the ground weather stations. The study indicates that the proposed HCDI with the gridded climate data input is promising in the sense that it can help us to predict potential drought extents and to mitigate its impacts in a changing climate. The longer term drought prediction (e.g., 9 and 12 month) capability, in particular, shows higher SS so that it can be used for climate-driven future droughts.

• Journal of Preventive Veterinary Medicine
• /
• v.42 no.4
• /
• pp.143-147
• /
• 2018

The present study aimed to develop growth prediction models of Listeria monocytogenes in processed meat products, such as mixed pressed hams, to perform accurate microbial risk assessments. Considering cold storage temperatures and the amount of time in the stages of consumption after opening, the growth of L. monocytogenes was determined as a function of temperature at 0, 5, 10, and $15^{\circ}C$, and time at 0, 1, 3, 6, 8, 10, 15, 20, 25, and 30 days. Based on the results of these measurements, a Baranyi model using the primary model was developed. The input parameters of the Baranyi equation in the variable temperature for polynomial regression as a secondary model were developed: $SGR=0.1715+0.0199T+0.0012T^2$, $LT=5.5730-0.3215T+0.0051T^2$ with $R^2$ values 0.9972 and 0.9772, respectively. The RMSE (Root mean squared error), $B_f$ (bias factor), and $A_f$ (accuracy factor) on the growth prediction model were determined to be 0.30, 0.72, and 1.50 in SGR (specific growth rate), and 0.10, 0.84, and 1.35 in LT (lag time), respectively. Therefore, the model developed in this study can be used to determine microorganism growth in the stages of consumption of mixed pressed hams and has potential in microbial risk assessments (MRAs).

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.2
• /
• pp.141-149
• /
• 2021

In the field of electric vehicles and AGVs, wireless power transfer (WPT) charging systems have been developed recently because of its convenience, reliability, and positive environmental impact due to cable and cord elimination. In this study, we propose a WPT charging system using a single stage AC-DC converter that can be reduced in size and weight and thus can ensure convenience. The proposed single-stage AC-DC converter can control a wide output voltage (36-54 VDC) within coupling ranges by using the variable link voltage applied to the WPT resonant circuit through phase-shifted modulation at a fixed switching frequency. Moreover, the input power factor and total harmonic distortion can be improved by using the proposed converter. A 1 kW prototype that can operate with an air gap range of 40-50 mm is fabricated and validated through experimental results and analysis.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.1
• /
• pp.751-758
• /
• 2021

This research is conducted to measure the efficiency level of Islamic banking in Indonesia and also to analyze the factors that can affect its efficiency level. This research used a purposive sampling technique to determine the sample size that will be used, with criteria that the bank has been operating since 2010 and consistently published its financial reports during the research period from 2011 until 2019; therefore, the total sample obtained was 11 samples. Analysis for efficiency level is done by using linear programming Stochastic Frontier Analysis (SFA), with test tool in the form of Frontier 4.1 and Eviews9 to find out what factors that affect efficiency. Efficiency test is done by involving input and output, while influence test used bank-specific variables comprising bank size, bank financial ratio, and macro-economy variable. Research result shows that there are only two banks that are almost close to being fully efficient firms, but the result still does not indicate that Islamic bank works efficiently. Results of the influence test show that factors affecting Islamic banking efficiency in Indonesia are bank size, Capital Adequacy Ratio (CAR), Non-Performing Finance (NPF), and Financing to Deposit Ratio (FDR), while other factors are not influential over the study period.

• Journal of Korean Academic Society of Home Health Care Nursing
• /
• v.29 no.1
• /
• pp.70-81
• /
• 2022

Purpose: This study was performed to explore the trend of nursing research in the Korean long-term care system. Methods: Articles published between 2008 and 2021 were searched using the terms "long-term care system" and "nursing." Ninety-one articles were analyzed and classified into five categories according to research methods. Data were extracted through a systematic review process and underwent descriptive statistics and content analyses. Results: The most analyzed variable in the survey studies was job satisfaction. Many variables were classified into input and output factors using Donabedian's model. The content analysis showed that most suggestions were about improving the political regulation system. Conclusion: It is necessary to establish a research foundation to provide research funding and support to cultivate future nursing research in long-term care. Systematic improvement of research in nursing should be continuously pursued to revitalize nursing services, expand nursing service interventions, and improve management competency programs in nursing institutions.

• Journal of Korea Multimedia Society
• /
• v.25 no.9
• /
• pp.1273-1283
• /
• 2022

This paper presents a locally adaptive HDR algorithm using the integral image and MSRCR for LDR images with inadequate exposure. There are two categories in controlling the dynamic range, which are global and local tone mappings. Since the global ones are relatively simple but have some limitations at considering regional characteristics, the local ones are often utilized and MSRCR is a representative method. MSRCR gives moderate results, but it requires lots of computations for multi-scale surround Gaussian functions and produces the Halo effect around the edges. Therefore, in order to resolve these main problems, the proposed algorithm remarkably reduces the computation of the surrounds due to the use of the integral image. And a set of variable-sized windows is adopted to decrease the Halo effect, according to the type of pixel's region. In addition, an offset controlling function is presented, which is mainly affected to the subjective image quality and based on the global input and the desired output means. As the results, the proposed algorithm no more use Gaussian functions and can reduce the computation amount and the Halo effect.

• Steel and Composite Structures
• /
• v.44 no.1
• /
• pp.49-63
• /
• 2022

This study aims to develop ensemble machine learning (ML) models for estimating the peak floor acceleration and maximum top drift of steel moment frames. For this purpose, random forest, adaptive boosting, gradient boosting regression tree (GBRT), and extreme gradient boosting (XGBoost) models were considered. A total of 621 steel moment frames were analyzed under 240 ground motions using OpenSees software to generate the dataset for ML models. From the results, the GBRT and XGBoost models exhibited the highest performance for predicting peak floor acceleration and maximum top drift, respectively. The significance of each input variable on the prediction was examined using the best-performing models and Shapley additive explanations approach (SHAP). It turned out that the peak ground acceleration had the most significant impact on the peak floor acceleration prediction. Meanwhile, the spectral accelerations at 1 and 2 s had the most considerable influence on the maximum top drift prediction. Finally, a graphical user interface module was created that places a pioneering step for the application of ML to estimate the seismic demands of building structures in practical design.