• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(4)
• /
• pp.110-113
• /
• 2000

In this paper, we consider the problem of digital audio watermarking to robust about compression without original audio data. We specifically address the audio watermarking using BPSK with variable carrier frequency. This technique make audio data embeded watermarking robust with compression attack, for example MPEG, AC-3, etc.

• The Journal of the Acoustical Society of Korea
• /
• 제16권3E호
• /
• pp.37-43
• /
• 1997

A frequency-variable ultrasonic vibrator is designed, which is made of a multi-layered PZT vibrator with a conical horn. Transmission line equations for the conical horn are derived and analyzed using the equivalent circuit method in order to analyze the characteristics of the vibrator. The controllability of the driving characteristics by varying the electrical impedance is confirmed by the experimental results of the free admittance characteristics and the vibrational velocity distributions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 하계학술대회 논문집
• /
• pp.376-379
• /
• 1990

This parer presents a cycloconverter with a LC resonant circuit for a induction motor drive. The cycloconverter can provide variable voltage and frequency three phase output while keeping the input displacement factor at 1.0. The input current wave for is are sinusoidal,and the wide output frequency range is appropriate for variable speed AC motor drives.

• 한국정보통신학회논문지
• /
• 제9권1호
• /
• pp.8-15
• /
• 2005

비선형적인 위상 변화를 지닌 비정상(non-stationary)신호는 레이더, 통신, 지질탐사, 음향, 생체공학 응용등 여러 분야에서 쉽게 접하는 신호이다. 비정상 신호는 일반적으로 시간의 변환에 따라 신호의 스페트럼 특성이 변화하는 신호를 의미하며, 순간 주파수는 신호의 특정시간에 해당하는 신호성분의 주파수를 의미한다. 따라서 열거한 레이더, 음향, 생ㅊ신호등에 있어서 순간 주파수는 신호의 물리적 특성을 파악하기 위한 중요한 변수이다. 이 논문에서는 연속 웨이브렛 변환을 이용한 비정상 신호의 순간 주파수를 결정에 대하여 연구하였고, 기존의 방법과 비교하였다. 신호에 잡음이나 여러 가지의 주파수가 중첩되어 있는 경우, 기존에 방법들로서는 정확한 순간 주파수를 결정할 수 없는 반면, 웨이브렛 변환을 이용한 경우, 신호의 성분에 관계없이 상당히 정확한 순간주파수를 결정할 수 있음에 대하여 설명하였다.

• 센서학회지
• /
• 제22권1호
• /
• pp.84-88
• /
• 2013

In this paper, the low price signal generator with capability of frequency high-resolution and variable sync pulse has implemented. It fulfils well the requirements for SS-OCT of the frequency resolution less than 1Hz, frequency stability of ${\leq}{\pm}0.5Hz$/10 min and variable sync pulse output timing. Through its performance test applied to wavelength swept laser, 120 nm sweeping range and 10 mW average optical power were obtained. This shows that the realized sine-wave generator can replace the commercial high cost and high performance signal generators employed by current SS-OCT systems.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.236-241
• /
• 2001

This paper presents a novel prototype of active voltage-clamping capacitor-assisted edge resonant soft switching PWM inverter operating at a constant frequency variable power (VPCF) regulation scheme, which is suitable for consumer high-power induction-heating cooking appliances. New generation IGBT with a trench gate is particularly improved in order to reduce conduction loss due to its lowered saturation voltage characteristics. The soft switching load resonant and quasi-resonant inverter designed distinctively using the latest IGBTs is evaluated from an experimental point of view.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.600-604
• /
• 1991

In this paper, an advanced PWM modulation strategy for driving a variable-speed induction motor is introduced. According to this method, the technique of efficiently eliminating harmonics component is achived. A switching pattern was computed making use of the near-proportionality of voltage and frequency in AC machines operating with constant flux. At low magnitudes and low frequencies of the foundamental, many more harmonics are eliminated than at high magnitudes and frequencies. In order to keep the inverter switching frequency constant over the output frequency range, chopping times diminishes as the frequency of the fundamental increases.

• 전기학회논문지
• /
• 제67권1호
• /
• pp.46-51
• /
• 2018

Constant slip frequency control has been conventionally used in thrust control of the linear induction motor(LIM) for magnetically levitated train. However in this paper variable slip frequency control method is presented to increase LIM efficiency according to change of driving notch. Thrust, attractive force, input power to inverter, regenerative power of the LIM are analyzed by finite element method when the train runs according to the presented control method. As a result it is proved experimentally that the electrical energy to inverter is reduced than the conventional method.

• 설비공학논문집
• /
• 제12권7호
• /
• pp.649-658
• /
• 2000

Thermodynamic modeling of low-pressure scroll compressor was developed by combining continuity and energy conservation equation. Suction gas heating was considered using energy balance inside the low pressure shell. Pressure, temperature and mass of refrigerant-22 as a function of orbiting angle were calculated by solving the governing equations using fourth order Rung-Kutta scheme. Motor efficiency was taken by experiments with a variation of frequency. The developed model was applied to the analysis of an inverter driven scroll compressor with a variation of frequency, pressure ratio and operating conditions. The model was verified with the experimental results at the same operating conditions. The developed model was adequate to predict performance of the inverter driven scroll compressor as a function of operating conditions. Calculated parameters from the model were discharge temperature, mass flow rate, power input, COP, and thermodynamic properties with respect to orbiting angle. To enhance the performance of a scroll compressor, it is essential to diminish leakage at low frequency level and improve the mechanical efficiency at high frequency level.

• Journal of Power Electronics
• /
• 제12권2호
• /
• pp.276-284
• /
• 2012

AC/AC power conversion is widely used to feed AC loads with a variable voltage and/or a variable frequency from a constant voltage constant frequency power grid or to connect critical loads to an unreliable power supply while delivering a very balanced and accurate sinusoidal voltage system of constant amplitude and frequency. The load specifications will clearly impose the requirements for the inverter stage of the power converter, while wider ranges of choices are available for the rectifier. This paper investigates the utilization of a buck-type current source rectifier as the active front-end stage of an AC/AC converter for applications that require an adjustable DC-link voltage as well as elimination of the low-frequency common mode voltage. The proposed solution is to utilize a combination of two or more zero current vectors in the Space Vector Modulation (SVM) technique for Current Sources Rectifiers (CSR).