• Structural Engineering and Mechanics
• /
• v.18 no.4
• /
• pp.389-410
• /
• 2004

In this study, theoretical and experimental results are presented which were obtained during an investigation of the influence of the $P-{\Delta}$ effect that was caused by the simultaneous changing of the axial load P of the column and the lateral displacement ${\Delta}$ in the external beam-column joints. The increase or decrease of ${\Delta}$ was simultaneous with the increase or decrease of the axial compression load P and caused an additional influence on the aseismic mechanical properties of the joint. A total of 12 reinforced concrete exterior beam-column subassemblies were examined. A new model, which predicts the beam-column joint ultimate shear strength, was used in order to predict the seismic behaviour of beam-column joints subjected to earthquake-type loading plus variable axial load and $P-{\Delta}$ effect. Test data and analytical research demonstrated that axial load changes and $P-{\Delta}$ effect during an earthquake cause significant deterioration in the earthquake-resistance of these structural elements. It was demonstrated that inclined bars in the joint region were effective for reducing the unfavourable impact of the $P-{\Delta}$ effect and axial load changes in these structural elements.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.259-262
• /
• 1996

This paper proposes an approach in modeling a 4x60inch Allis Chalmers Hydrocone Crusher [1] hydroset and presents some numerical simulation results. The mining and quarry industry is one of the industries which extensively use hydrocone crushers, which are a family of cone crushers, for rock size reduction. Field studies have proved that if proper control and management of these machines is undertaken, they can yield an increased production output of more than 30%, in addition substantial savings in both energy consumption per unit ton produced and manpower can be easily realized. In order to achieve these economic benefits, high performance from these machines is expected. Implementing automatic control for such machines would be a great leap towards achieving both economic benefits and more effective fool-proof predictive maintenance. But, unfortunately, for such a control system to be designed, it necessary to make a mechatronical model of this plant. The plant model is able to give us an insight into variations of both the plant gap setting (displacement) and system pressure due to variable loading arising from the crushing process.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1006-1011
• /
• 2004

Recently, technical trend in machine tools is focused on enhancing of speed, accuracy and reliability. Such high speed usually results in thermal displacement and structural deformation. To minimize such thermal effect, most precision machine tools adopt high precision cooling system. This study proposes a temperature control for an oil cooler system using PI control with fuzzy logic. In a cooler system, the refrigerant flow rate is controlled by rotational speed of the compressor, where the outlet oil temperature is selected as the control variable. The fuzzy control rules iteratively correct PID parameters to minimize the error, difference between the outlet temperature and the reference one. Here, the ambient temperature is used as the reference one. To show the effectiveness of the proposed method, a series of experiments are conducted for an oil cooler system of machine tools, and the results are compared with the ones of a conventional PID control. The experimental results show that the proposed method has advantages of smaller overshoot and smaller steady state error.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.20 no.3
• /
• pp.232-236
• /
• 1998

Fibrous dysplasia is a benign pathologic condition of bone which medullary bone is replaced and disturbed by poorly organized, structually unsound fibro-osseous tissue. When facial bones are involved, considerable esthetic deformity may result. The term monostotic fibrous dysplasia has been applied when one bone is involved : when more than one bone is affected, the term polyostotic used. The polyostotic form may be accomplished by pigmented skin lesion (Jaffe type), or by pigmented skin lesions with endocrine disturbance (Albright syndrome). No general agreement exists on the cause of fibrous dysplasia. A few authors have suggested that fibrous dysplasia as a result of trauma. It occurs predominantly in infant, adolescent females and runs a variable clinical coures. When several bones are involved, it tends to be unilateral. Involvements of alveolar bone may produce displacement of teeth with malocclusion, or loss of teeth, or both. Now, we will present a case of fibrous dysplasia on the left facial region treated by conservative contouring surgery.

• Structural Engineering and Mechanics
• /
• v.73 no.6
• /
• pp.715-724
• /
• 2020

The influence on flexural strength of Glass/Epoxy laminated composite curved panels of different geometries (cylindrical, spherical, elliptical, hyperboloid and flat) due to inclusion of nano cenosphere filler examined in this research article. The deflection responses of the hybrid structure are evaluated numerically using the isoparametric finite element technique and modelled mathematically via higher-order displacement structural kinematics. To predict the deflection values, a customised in-house computer code in MATLAB environment is prepared using the higher-order isoparametric formulation. Subsequently, the numerical model validity has been established by comparing with those of available benchmark solution including the convergence characteristics of the finite element solution. Further, a few cenosphere filled hybrid composite are prepared for different volume fractions for the experimental purpose, to review the propose model accuracy. The experimental deflection values are compared with the finite element solutions, where the experimental elastic properties are adopted for the computation. Finally, the effect of different variable design dependent parameter and the percentages of nano cenosphere including the geometrical shapes obtained via a set of numerical experimentation.

• Steel and Composite Structures
• /
• v.25 no.3
• /
• pp.315-326
• /
• 2017

In this work, thermoelastic dynamic behavior of functionally graded carbon nanotube reinforced composite (FG-CNTRC) cylinders subjected to mechanical pressure loads, uniform temperature environment or thermal gradient loads is investigated by a mesh-free method. The material properties and thermal stress wave propagation of the nanocomposite cylinders are derived after solving of the transient thermal equation and obtaining of the time history of temperature field of the cylinders. The nanocomposite cylinders are made of a polymer matrix and wavy single-walled carbon nanotubes (SWCNTs). The volume fraction of carbon nanotubes (CNTs) are assumed variable along the radial direction of the axisymmetric cylinder. Also, material properties of the polymer and CNT are assumed temperature-dependent and mechanical properties of the nanocomposite are estimated by a micro mechanical model in volume fraction form. In the mesh-free analysis, moving least squares shape functions are used to approximate temperature and displacement fields in the weak form of motion equation and transient thermal equation, respectively. Also, transformation method is used to impose their essential boundary conditions. Effects of waviness, volume fraction and distribution pattern of CNT, temperature of environment and direction of thermal gradient loads are investigated on the thermoelastic dynamic behavior of FG-CNTRC cylinders.

• Structural Engineering and Mechanics
• /
• v.63 no.3
• /
• pp.303-315
• /
• 2017

This paper presents a review on getting a Weighted Multi-Objective Optimization (WMO) of Tuned Mass Damper (TMD) parameters based on Response Surface Methodology (RSM) coupled central composite design and Weighted Desirability Function (WDF) to attenuate the earthquake vibration of a jacket supported Offshore Wind Turbine (OWT). To optimize the parameters (stiffness and damping coefficient) of damper, the frequency ratio and damping ratio were considered as a design variable and the top displacement and frequency response were considered as objective functions. The optimization has been carried out under only El Centro earthquake results and after obtained the optimal parameters, more two earthquakes (California and Northridge) has been performed to investigate the performance of optimal damper. The obtained results also compared with the different conventional TMD's designed by Den Hartog's, Sadek et al.'s and Warburton's method. From the results, it was found that the optimal TMD based on RSM shows better response than the conventional damper. It is concluded that the proposed response model offers an efficient approach regarding the TMD optimization.

• Steel and Composite Structures
• /
• v.27 no.1
• /
• pp.109-122
• /
• 2018

In This work an analysis of the propagation of waves of functionally graduated plates is presented by using a high order hyperbolic (HSDT) shear deformation theory. This theory has only four variables, which is less than the theory of first order shear deformation (FSDT). Therefore, a shear correction coefficient is not required. Unlike other conventional shear deformation theories, the present work includes a new field of displacement which introduces indeterminate integral variables. The properties of materials are supposed classified in the direction of the thickness according to two simple distributions of a power law in terms of volume fractions of constituents. The governing equations of the wave propagation in the functionally graded plate are derived by employing the Hamilton's principle. The analytical dispersion relation of the functionally graded plate is obtained by solving an eigenvalue problem. The convergence and the validation of the proposed theoretical numerical model are performed to demonstrate the efficacy of the model.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.9
• /
• pp.2172-2180
• /
• 1993

Under general loadings, including body forces, crack-face tractions and thermal loading, the energy release rate equation for a two-dimensional cracked body is presented. Defining the virtual crack extension as the variation of the geometry, the equation is directly derived by a shape design sensitivity of the potential energy. Although the form of the derived energy release rate equation is different from other researchers's results, the three example show that the former is exactly the same as the latter. However, the final integral equation do not involve the derivative of the displacement on the crack surface and crack tip region, thereby improving the numerical accuracy in the computation of the energy relase rate. Moreover, as it was derived from the governing equation including non-linear elasticity without special assumptions, the energy release rate of a elasto-plastic fracture can be obtained and any numerical stress analysis method can be applied.

• The korean journal of orthodontics
• /
• v.19 no.1 s.27
• /
• pp.219-243
• /
• 1989

The purpose of this study was to evaluate the effects of the chincap therapy on the craniofacial structure in persons with skeletal Class III malocclusion. The patients selected for this study were treated with extra-oral chincap therapy only. Both control and treatment samples were obtained from Seoul National University Hospital where these longitudinal data were gathered. 55 treated patients and 14 control patients were studied. The mean ages at the 1st evaluation was 8 years 3 months in the treatment sample and 9 years 4 months in the control sample. The duration of chincap therapy was variable but averaged 2 years of treatment. Post-treatment observation procedeeded for 1 year 2 months. Active treatment and post treatment effects were evaluated. The results were as follows: 1. Neither significant restraint nor acceleration of growth was found in the cranial base and maxilla during treatment. 2. A distal rotation of the mandibular complex was seen. 3. Some amount of restraint of growth was found in mandibular body length, ramus height, mandibular length during treatment. 4. The genial angle was reduced. 5. After removal of the chin-cap, forward displacement of the mandible took place.