• Journal of the Korean Institute of Navigation
• /
• v.25 no.4
• /
• pp.455-460
• /
• 2001

본 연구에서는 방향성 결합기의 특성과 PIN다이오드의 특성을 이용하여 가변 감쇠기를 구현하였다. 기존의 Even-Odd Mode해석법이 아닌 간단한 2-port 기법으로 감쇠기를 분석하였으며, 산란 파라미터는 결합포트의 종단 임피던스가 동일한 경우와 동일하지 않은 경우에 있어서의 감쇠기의 동작특성을 평가하였다. 방향성 결합기의 결합포트는 가변종단을 HP사의 전류제어 소자인 HSMP-3864 PIN다이오드를 사용하였다. 구현된 가변감쇠기는 PCS 송신주파수 1.9 GHz에서 감쇠 범위가 30 dB 이상, 삽입손실 5 dB 이하, 입·출력 반사계수 -25 dB 이하의 특성을 나타내었으며, 이는 PCS와 셀룰러 이동통신 기지국용 전력 증폭기를 온도 등과 같은 외부의 환경변화에 따라서 이득을 가변 시킬 수 있으며, 또한 증폭기의 선형성을 향상시킬 것으로 사료된다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.152-153
• /
• 2001

파장 가변형 광 필터와 파장 선택형 광 스위치는 파장분할다중 광통신 및 광 교환 시스템을 구현하는데 매우 중요한 소자들 중의 하나이다. 특히 음향광학효과를 이용한 파장 가변형 광 필터(AOTF ： Acousto-Optic Tunable Filter)는 150nm 이상의 넓은 파장 가변범위, 1.5nm이하의 좁은 통과대역폭, 수 $\mu\textrm{s}$ 정도의 비교적 빠른 스위칭 속도 그리고 여러 개의 파장 채널을 동시에 선택할 수 있는 장점들을 가지고 있지만, 한편으로 표면 음향파(SAW： Surface Acoustic Wave) 구동에 필요한 RF 파워와 부 모드 (sidelobe)가 비교적 크다는 단점 때문에 실용화에 많은 제약을 받아왔다. (중략)

• ETRI Journal
• /
• v.24 no.2
• /
• pp.142-152
• /
• 2002

In this paper, we propose and analyze a new multiple access protocol for a local area optical Internet based on a wavelength division multiplexing technique which uses a passive star coupler. The proposed contention-based reservation protocol can support variable-length as well as fixed-length messages for transporting Internet packets with one reservation of a minislot at the beginning of a packet transmission. The minislot is used to reserve the data channel on the basis of the slotted ALOHA protocol and the control node ensures subsequent message transmission on the same wavelength. Thus, all messages need not be broken down to many fixed-length packets, and consecutive messages are transmitted through the same wavelength. Moreover, the proposed protocol reduces the collision probability of minislots and improves wavelength utilization. We determine the maximum throughput and verify the results with simulation.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.1063-1066
• /
• 2000

ln this paper, a new active phase shifter is proposed using a vector sum method, and it is shown that the proposed phase shifter is more efficient than the others in size, power, number of circuits, and gain. Also a unique digital phase control method of the circuit is suggested. The proposed scheme was designed and implemented using a Wilkinson power combiner/divider, a branch line 3dB quadrature hybrid coupler and variable gain amplifiers (VGAs) using dual gate FETs (DGFETs). Furthermore, it is also shown that the proposed scheme is more efficient and works properly with the digital phase control method.

• Journal of the Optical Society of Korea
• /
• v.18 no.6
• /
• pp.657-662
• /
• 2014

We demonstrate a simulation of a parallel hybrid fiber amplifier in the C+L-band with a gain controlling technique. A variable optical coupler is used to control the input signal power for both EDFA and RFA branches. The gain spectra of the C+L-band are flattened by optimizing the coupling ratio of the input signal power. In order to enhance the pump conversion efficiency, the EDFA branch was pumped by the residual Raman pump power. A gain bandwidth of 60 nm from 1530 nm to 1590 nm is obtained with large input signal power less than -5 dBm. The gain variation is about 1.06 dB at a small input signal power of -30 dBm, and it is reduced to 0.77 dB at the large input signal power of -5 dBm. The experimental results show close agreement with the simulation results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.77-88
• /
• 2000

In this paper, the 3-mode variable gain high power amplifier for a transmitter of INMARSAT-B operating at L-band(1626.5-1646.5 MHz) was developed. This SSPA can amplify 42 dBm in high power mode, 38 dBm in medium power mode and 36 dBm in low power mode for INMARSAT-B. The allowable errol sets +1 dBm as the upper limit and -2 dBm as the lower limit, respectively. To simplify the fabrication process, the whole system is designed by two parts composed of a driving amplifier and a high power amplifier. The HP's MGA-64135 and Motorola's MRF-6401 were used for driving amplifier, and the ERICSSON's PTE-10114 and PTF-10021 for the high power amplifier. The SSPA was fabricated by the RP circuits, the temperature compensation circuits and 3-mode variable gain control circuits and 20 dB parallel coupled-line directional coupler in aluminum housing. In addition, the gain control method was proposed by digital attenuator for 3-mode amplifier. Then il has been experimentally verified that the gain is controlled for single tone signal as well as two tone signals. In this case, the SSPA detects the output power by 20 dB parallel coupled-line directional coupler and phase non-splitter amplifier. The realized SSPA has 41.6 dB, 37.6 dB and 33.2 dB for small signal gain within 20 MHz bandwidth, and the VSWR of input and output port is less than 1.3:1. The minimum value of the 1 dB compression point gets more than 12 dBm for 3-mode variable gain high power amplifier. A typical two tone intermodulation point has 36.5 dBc maximum which is single carrier backed off 3 dB from 1 dB compression point. The maximum output power of 43 dBm was achieved at the 1636.5 MHz. These results reveal a high power of 20 Watt, which was the design target.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.6
• /
• pp.55-64
• /
• 2007

This paper represents characteristics and design example of series loaded LCC type high frequency resonant DC-DC converter with variable parallel capacitor in the secondary side of inductive power transformer. In this converter, ZVS(zero voltage switching) technique is applied to reduce turn-off switching losses, and the applied converter used the PFM switching pattern to control output voltage. The operating characteristics of the proposed converter is analyzed using nomalized parameter such as switching frequency and load factor with varing the secondary parallel resonant capacitor. The results of analysis show the operating characteristics and design method of the proposed converter using characteristic values. And the proposed converter can be applied for the contactless power supply with linear transfer system such as dean room facilities of semiconductor and Flat Panel Display.