• Korean Journal of Materials Research
• /
• v.18 no.5
• /
• pp.253-258
• /
• 2008

A simple method to deposit carbon nanotube films uniformly on large area substrates using an arc discharge method is reported in this paper. The arc discharge method was modified to deposit carbon nanotube films in situ on the substrates. The substrates were scanned several times over the arcing point for a uniform film thickness. Deposition was carried out under variable dc bias conditions at 600 torr of $H_2$ gas. The thickness uniformity of the single-wall carbon nanotube films as characterized by a four-point probe was within 30% deviation. The morphology and crystal quality of the single-wall carbon nanotube film were also characterized by field emission scanning electron microscopy and Raman spectroscopy.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.291-294
• /
• 2003

The circuit substrate was made from the Low Temperature Cofired Ceramics(LTCC) that a $\varepsilon_\gamma$ was 7.8. Accumulated Varactor and the low noise transistor which were a Surface Mount Device-type element on LTCC substrate. Let passive element composed R, L, C with strip-line of three dimension in the multilayer substrate circuit inside, and one structure accumulate band-pass filter, resonator, a bias line, a matching circuit, and made it. Used Screen-Print process, and made Strip-line resonator. A design produced and multilayer-type VCO(Voltage Controlled Oscillator), and recognized a characteristic with the Spectrum Analyzer which was measurement equipment. Measured multilayer structure VCO is oscillation frequency 1292[MHz], oscillation output -28.38[dBm], hamonics characteristic -45[dBc] in control voltage 1.5[V], A phase noise is -68.22[dBc/Hz] in 100 KHz offset frequency. The oscillation frequency variable characteristic showed 30[MHz/V] characteristic, and consumption electric current is approximately 10[mA].

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.433-435
• /
• 1993

The purpose of this study is to propose a robust OFVSCS that have the robust properties against process parameter variations and external disturbances by extending the basic OFVSCS and to evaluate its control performances. The ROFVSCS is composed of dynamic switching surfaces and output feedback switching control inputs that are constructed by the use of the unknown vector modeling technique. With the proposed scheme. existence of sliding mode is guaranteed and any nonzero bias can be suppressed in the face of disturbances and process parameter variations as far as well-known matching condition is satisfied. Due to the fact that the ROFVSCS is driven by small number of measured information, the practical application of VSCS for the systems with unmeasurable states and for high order systems. that conventional schemes cannot be applied, is possible with the proposed scheme. It is noticeable that implementation cost or VSCS can be considerably reduced without sacrifice of control performances by adopting ROFVSCS since there is no need to measure the states with high measurement cost.

• Structural Engineering and Mechanics
• /
• v.34 no.1
• /
• pp.15-38
• /
• 2010

In order to predict the shear strengths of reinforced concrete beams, many deterministic models have been developed based on rules of mechanics and on experimental test results. While the constant and variable angle truss models are known to provide reliable bases and to give reasonable predictions for the shear strengths of members with shear reinforcement, in the case of members without shear reinforcement, even advanced models with complicated procedures may show lack of accuracy or lead to fairly different predictions from other similar models. For this reason, many research efforts have been made for more accurate predictions, which resulted in important recent publications. This paper develops probabilistic shear strength models for reinforced concrete beams without shear reinforcement based on deterministic shear strength models, understanding of shear transfer mechanisms and influential parameters, and experimental test results reported in the literature. Using a Bayesian parameter estimation method, the biases of base deterministic models are identified as algebraic functions of input parameters and the errors of the developed models remaining after the bias-correction are quantified in a stochastic manner. The proposed probabilistic models predict the shear strengths with improved accuracy and help incorporate the model uncertainties into vulnerability estimations and risk-quantified designs.

• Journal of Magnetics
• /
• v.18 no.3
• /
• pp.302-307
• /
• 2013

Hybrid-type magnetic bearings using both permanent magnets and electromagnets have been used for rotating machinery. In the case of conventional thrust hybrid magnetic bearings supporting axial loads, radially magnetized permanent ring magnets, which have several demerits such as difficult magnetization and assembly, have been used to generate bias flux. In this study, a novel thrust hybrid magnetic bearing using an axially magnetized permanent ring magnet is presented. Because it is easy to magnetize a ring magnet in the axial direction, the segmentation of the ring magnet for magnetization is not required and the assembly process can be simplified. For verifying the performance of the proposed method, a test rig that consists of a proposed thrust magnetic bearing and variable loads is constructed. This paper presents the detailed design procedures and the obtained experimental results. The results show that the developed thrust magnetic bearing has the potential to replace conventional thrust magnetic bearings.

• Journal of Home Health Care Nursing
• /
• v.28 no.3
• /
• pp.266-275
• /
• 2021

Purpose: This study was conducted to explore the mediating effect of menopausal symptoms in the relationship between occupational stress and quality of Life in middle-aged working women Method: Data collection was conducted from May 2019 to July 2019. A sample of 130 middle-aged working women was recruited from three cities in Korea. The collected data were analyzed using descriptive statistics, t-tset, ANOVA, Scheffé test, pearson correlation, and a three step regression analysis. The mediating effect was analyzed using PROCESS macro with a 95.0% bias corrected bootstrap confidence interval (5,000 bootstraps resampling). Results: Quality of life had a negative correlation with occupational stress and menopausal symptoms, while there was a positive correlation between occupational stress and menopausal symptoms. Menopausal symptoms showed a direct effect on quality of life through occupational stress as a mediating variable. Conclusion: These results suggest that menopausal symptoms should be considered when developing interventions to improve quality of life through occupational stress control of middle-aged working women

• Korean Journal of Remote Sensing
• /
• v.35 no.1
• /
• pp.195-201
• /
• 2019

The Outgoing Longwave Radiation (OLR) is an important satellite-driven variable for understanding the Earth's energy budget balance. The geostationary OLR retrievals require angular and spectral integration using an empirical equation for irradiance flux-to-OLR from a regression analysis, which determines the accuracy of the narrowband satellite-based OLR. We selected homogeneous pixels which is satisfied less temporal-spatial variability of cloud, on three infrared channels (6.7, 10.8, $12.0{\mu}m$) of the first multipurpose geostationary satellite in Korea, namely the Communication, Ocean and Meteorological Satellite/Meteorological Imager (COMS/MI). Multiple regression analysis was performed to retrieve OLR with improved accuracy using selected parameters based on theoretical and physical significance. This algorithm yielded retrieval with higher accuracy than broadband-based OLR retrieval: RMSE of 10.54 to $3.81W\;m^{-2}$, and bias of -8.49 to $-0.07W\;m^{-2}$.

• Journal of Preventive Veterinary Medicine
• /
• v.42 no.4
• /
• pp.143-147
• /
• 2018

The present study aimed to develop growth prediction models of Listeria monocytogenes in processed meat products, such as mixed pressed hams, to perform accurate microbial risk assessments. Considering cold storage temperatures and the amount of time in the stages of consumption after opening, the growth of L. monocytogenes was determined as a function of temperature at 0, 5, 10, and $15^{\circ}C$, and time at 0, 1, 3, 6, 8, 10, 15, 20, 25, and 30 days. Based on the results of these measurements, a Baranyi model using the primary model was developed. The input parameters of the Baranyi equation in the variable temperature for polynomial regression as a secondary model were developed: $SGR=0.1715+0.0199T+0.0012T^2$, $LT=5.5730-0.3215T+0.0051T^2$ with $R^2$ values 0.9972 and 0.9772, respectively. The RMSE (Root mean squared error), $B_f$ (bias factor), and $A_f$ (accuracy factor) on the growth prediction model were determined to be 0.30, 0.72, and 1.50 in SGR (specific growth rate), and 0.10, 0.84, and 1.35 in LT (lag time), respectively. Therefore, the model developed in this study can be used to determine microorganism growth in the stages of consumption of mixed pressed hams and has potential in microbial risk assessments (MRAs).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5B
• /
• pp.393-403
• /
• 2011

This study theoretically reviewed the empirical G/R ratio by considering three regression and trend lines; the general linear regression curve, linear regression curve passing the origin, and the line passing the origin and the mass center of observed data. This review included the problem of choosing the independent variable and that of considering the zero measurements. This review result was also applied to the Typhoon Maemi in 2003 for their evaluation. Additionally, those regression and trend lines were compared using the RMSE between the corrected radar rainfall and observed rain gauge rainfall to select the most appropriate G/R ratio. Summarizing the results is as follows. First, the results of selecting the rain gauge rainfall as the independent variable were found better than the opposite case. Second, the effect of zero measurements varies depending on the structure of radar and rain gauge rainfall. Finally, the results from the comparison of three regression and trend lines shows that the slope of the regression line passing the origin with its independent variable of rain gauge rainfall would be used most appropriately for the G/R ratio, especially when the corrected radar rainfall is used for the flood analysis. The effect of zero measurements in this case was found not so significant.

• Strategy21
• /
• s.46
• /
• pp.123-157
• /
• 2020

This research focuses on one important type of non-traditional threat, maritime piracy, and tries to supplement previous research from the perspective of military power, especially naval power. When considering the elements of military power, naval power is a core independent variable to explain piracy incidents. Indeed, naval power can play a key role in solving piracy problems, since naval power is the only legitimate force to respond to piracy in the sea. It is natural that well equipped and trained naval power in the sea increases the probability of capturing pirates, which leads to increasing the costs of piracy and decreasing its occurrences. In addition, since naval combatant ships have more impressive weapons than those of pirate boats, just the presence of naval combatant ships could serve to deter piracy incidents in the sea. The main purpose of this research is finding the effectiveness of large multinational naval efforts to deter piracy incidents in Africa. With this research purpose, I analyze 771 piracy incidents that occurred in African states from 2009 to 2014. Furthermore, I include all 33 coastal states in Africa regardless of the experiences of piracy incidents in order to avoid selection bias, which is very common in quantitative-based piracy incidents research. The dependent variable of this research is frequency of maritime piracy incidents for a country-year and the independent variable is the number of multi-national naval warships that operate near Somalia. With this analysis, I find the large number of multi-state naval combatant ships are negatively related to piracy incidents. In other words, as a main means to counteract piracy incidents, multi-state naval combatant ships are conducive to reduce piracy incidents near Somalia, since it increases costs (being captured) of conducting piracy.